how do you miter a corner on a quilt binding

How to Miter Corners on a Quilt: A Step-by-Step Guide

Full Answer

How to make perfect mitered corners on a quilt?

Making Perfect Mitered Corners Using the 8" x 24" My Favorite Mitering Ruler

1. Pin your borders in position, matching ends, centers and quarters of the quilt and borders.
2. Add all four borders, starting and stopping 1/4" from the end of the quilt. It is not necessary to press yet. ...
3. Select the first corner you want to miter. ...
4. Stitch 1/4" from the marked or cut edge to create a mitered corner. ...

More items...

How to sew perfect mitered corners?

Method Two to Sew Mitered Corners

1. Create First Hem. Hold the sides of the clothes and fold them up to ½ or more on the backside.
2. Press First Hem. Press the first hem correctly till you see the crease lines.
3. Create Second Hem. ...
4. Press the Second Hem. ...
5. Draw Diagonal. ...
6. Fold the Diagonal Line. ...
7. Stitch. ...
8. Cut the Extra Part. ...
9. Turn the Corner. ...
10. Stitch the Hems. ...

How to make a mitered corner?

Prepare the fabric

1. Give the fabric a nice press.
2. Place it on your cutting mat and with the help of your rotary cutter and the quilting ruler, square up the fabric. ...
3. Decide the width of the border and with the help of a fabric marker or chalk and the quilting ruler, trace two lines along the edges, in the width ...
4. Repeat for all sides of the fabric.

More items...

How to sew the corners of the quilt binding?

Rounded Corners Tutorial Supplies

1. Square Up Your Quilt Before you round those corners, you’ll need to square up your finished quilt. ...
2. Use a Ruler to Prepare Rounded Quilt Corners Once your quilt corners are square and your quilt is trimmed, you’re ready for the fun part! ...
3. Attach the Binding

How to make a binding look nice?

How to cover raw edge of quilt?

How to lay flat a corner?

What is the last step in making a quilt?

How to know if a quilt is folded?

Easy Mitered Corners for Quilt Binding - YouTube

Quilt binding is often the last step in finishing a quilt and an important one! We're often in a hurry to get it done, but when it's a beautiful binding, it'...

Getting the Perfect Corner on Your Binding - Rachel Rossi

Binding can make or break your quilt. You could have done it all right from start to finish: getting straight cuts, squaring up each block, snipping every thread, and pressing every seam perfectly.But your binding might make all that hard work go unnoticed!

How to make a binding look nice?

One way to have a really nice binding is to have mitered corners.

How to cover raw edge of quilt?

Clip off the bulk in the corner. This method can be done while the quilt is already being stitched, if you are a fold and stitch type of person that doesn't like to pin. Fold the first edge over to cover the raw edge. Next, fold the same edge over. This will cover the edge of the quilt top. Next, fold the corner over.

How to lay flat a corner?

Clip off about half to a third of the corner. This helps reduce bulk in the corner and helps it lay flat.

What is the last step in making a quilt?

One of the last step of making a quilt is putting on the binding. I know that sometimes, after I have spent a lot of time working on a quilt, I am anxious to get it done. It is such a temptation to do a quick job just to have it done. But after there has been so much time put into a quilt, it is important to finish it nice so that the WHOLE quilt can be awesome.

How to know if a quilt is folded?

If the fabric of the quilt top is folded then the fold is too far into the quilt. Then, fold in each side. Here is the first side. And the second side. You know you have done it correctly if the corner is sharp, the folds on the quilt top line up, and the diagonal edges on the mitered corner don't overlap too much.

1. Figure out what length to cut the strips

We can’t avoid math in this tutorial, but don’t worry, it’s not calculus! You will need to know the size of the block that you will be creating the border for. I am using a 10” square for my example, and I will have a 2” border. (It doesn’t have to be a square to make this formula work.)

2. Cut the strips and mark them

Cut your strips from your border fabric. I will be cutting 4- 2”x20” strips for my example block.

3. Line up the center marks for the border and the center block

Place your border and center block right sides together, line up the marks you just made, and pin in place. Next, make a mark on either end of the border ¼” away from the edge of the center block.

4. Sew the borders to the center block

Starting at one end ¼” in from the edge of the center block, sew the border to the block. Don’t forget to backstitch at the beginning and end of these seams to hold those stitches in place.

5. Fold the block diagonally to create a triangle

Match one corner to the corner diagonal from it. It will look like a triangle, not a rectangle. Have the folded edge pointed towards you on your table and line up the border strips in each of the bottom corners.

6. Mark and sew the mitered corners

Line up your ruler or another straight edge with the fold and mark the line you will stitch to create the mitered corners. Mark both corners at the bottom of the triangle.

7. Press the block to finish

Press your block and stand back and admire that perfect 90° mitered corner.

How to make a mitered corner in quilt binding?

NOTE: I use a 2.5″ Binding strip to start out with. 1. Begin sewing your binding to the BACK of your quilt. (Start in the middle of one of the sides of your quilt) 2. When you come close to the corner of your quilt, stop sewing 1/4″ from the edge of the quilt.

How to fold a quilt corner?

To fold your quilt corner into a mitered corner, you’ll want to fold in one side of the binding like the photo below. Tuck it all the way flat up in the corner. This will create a 45-degree angle with your other binding strip/. It might take a little practicing to get the mitered corner perfect, but you can do it!

Where to fold binding line?

Fold your binding line down where the raw edges of the fabric match up with the raw edge of your trimmed quilt.

How many pages are there in Busy Girl's Guide to Quilting in the Midst of an Already Full?

My FREE 9 page 'Busy Girl's Guide to Quilting in the Midst of an Already Full Life' has helped SO many people make changes in their crafting & quilting!

How to attach quilt binding to quilt?

Realign the quilt binding with the quilt and sew through all layers to finish attaching it, ending the seam just past the beginning of the first seam. Use a blindstitch and matching thread to secure the angled fold to the tucked-in strip. Sew the quilt binding to the back of the quilt.

How to make a quilt with a binding strip?

Create a continuous binding strip that's about 25 inches longer than the distance around all four corners of the quilt. Starting about one-third of the distance between two corners, align the raw edge of one end of the binding with the raw edge of the quilt top, right sides together.

What Is Quilt Binding?

After the quilt sandwich is complete , narrow fabric sewn around the outer edges makes up its binding. This holds together the edges of the quilt top, batting, and quilt backing, keeping them from fraying or coming apart in other ways.

How to blind stitch a quilt?

Use a sharp needle or something similar to sew the folded edge of the quilt binding to the quilt backing with a blind-stitch (such as you would use in needle turn applique ). Use a matching thread or any thread that blends with your fabric. Do not let the stitches travel through all layers, as they would be visible on the front of the quilt.

How to remove excess batting from quilt?

Carefully remove excess batting and backing by trimming those layers to meet the raw edge created by the quilt binding and quilt top. Take care not to distort the seam allowance .

How to sew a quilt with a pin?

Unfold, and sew to the quilt, beginning at the angled tip and sewing through only one layer of the strip. Stop at the pin mark, take a few backstitches and cut the threads. Lift the presser foot and refold the binding lengthwise again, aligning both edges of the strip evenly with the edge of the quilt.

How to sew angled tails together?

Place the angled tails right sides together, offsetting their angled ends by 1/4 inch. Sew the binding ends together with a 1/4-inch seam allowance. Refold the quilt binding, then pin and sew the remainder to the quilt.

How to make a mitered corner on a quilt?

Fold the adjoining side of the backing fabric up and over the quilt top as before. Fold the material at the corner under at a 45-degree angle and whip or slip stitch it in place to create a mitered corner. Continue stitching on around the quilt, mitering each corner. Advertisement.

What is the final step in making a quilt?

The final step in making a quilt is to bind, or cover, the raw edges. There are several methods. One is self-binding using the backing fabric to cover the raw edges and stitching it in place. Advertisement.

How to make a quilt with a quilt top?

Fold the backing fabric up over the quilt top. Turn under 1/4-inch and whip or slip stitch the folded fabric to the quilt top. You may wish to press the 1/4-inch fold in place with your fingers, or use an iron.

How to make a quilt with a backing?

Step 1. Measure your backing carefully before you begin quilting. To use the backing as the binding it will need to measure 2 to 4 inches larger all around than the top. Proceed to quilt the pieces together, but stop quilting 1/2-inch from the edges of the quilt top.

What do you need to finish a quilt?

Things You'll Need. Measuring tape. Quilting thread and needle. Thimble. Iron (optional) Self-binding is one of the ways to finish a quilt. Quilts are fabric sandwiches, the top usually of fabric pieced together in a design or pattern. The backing is traditionally a solid piece of fabric and can be plain, colored or patterned to coordinate with ...

What is the backing of a quilt?

The backing is traditionally a solid piece of fabric and can be plain, colored or patterned to coordinate with the top. The filling of the sandwich is the batting of polyester fiberfill or other batting material. The final step in making a quilt is to bind, or cover, the raw edges. There are several methods.

How to make a binding look nice?

One way to have a really nice binding is to have mitered corners.

How to cover raw edge of quilt?

Clip off the bulk in the corner. This method can be done while the quilt is already being stitched, if you are a fold and stitch type of person that doesn't like to pin. Fold the first edge over to cover the raw edge. Next, fold the same edge over. This will cover the edge of the quilt top. Next, fold the corner over.

How to lay flat a corner?

Clip off about half to a third of the corner. This helps reduce bulk in the corner and helps it lay flat.

What is the last step in making a quilt?

One of the last step of making a quilt is putting on the binding. I know that sometimes, after I have spent a lot of time working on a quilt, I am anxious to get it done. It is such a temptation to do a quick job just to have it done. But after there has been so much time put into a quilt, it is important to finish it nice so that the WHOLE quilt can be awesome.

How to know if a quilt is folded?

If the fabric of the quilt top is folded then the fold is too far into the quilt. Then, fold in each side. Here is the first side. And the second side. You know you have done it correctly if the corner is sharp, the folds on the quilt top line up, and the diagonal edges on the mitered corner don't overlap too much.