Instructions
- Paint a pot white and let dry completely.
- Separate a napkin by gently peeling back the solid colored backing, discard the backing.
- Cut the napkin to fit around the pot.
- Apply a thin layer of Mod Podge to the pot on one small section.
- Place the napkin over the Mod Podge and press lightly.
- Repeat in sections until the napkin completely covers the pot.
Can you use mod Podge to make a flower pot?
This Mod Podge DIY flower pot is a great Mother’s Day gift for moms and grandparents alike – and would also make a great table centerpiece! Skills Required: Beginner.
How do you cover a planter with mod Podge?
Print out enough photos to cover your pot, on either dry inkjet or laserjet ink. This is to prevent smearing. Cut the photos out and set aside. Add a layer of Mod Podge to the planter. Choose one photo and smooth it down. Keep adding Mod Podge and photos until the planter is covered. Smooth thoroughly to remove bubbles. Let dry for 15 - 20 minutes.
How do you make a flower pot out of fabric?
Step 1: Place your flower pot in the right corner of your fabric, leaving about 1 1/2″ of fabric from the edge of your pot. This allows you to have enough fabric to fold over the lip of your pot. Roll your flower pot from left to right in an arch shape and trace the arch shape onto your fabric, keeping the 1 1/2″ fabric allowance.
How do you roll a flower pot?
Roll your flower pot from left to right in an arch shape and trace the arch shape onto your fabric, keeping the 1 1/2″ fabric allowance. Step 2: Cut out your fabric.
How to make a flower pot with modge podge?
How to make a pot with a slit?
Can I seal a flower pot with Mod Podge?
Start with clean clay pots. Use gloss Mod Podge for a shiney hard finish. Seal the inside of the pot as a final coat to prevent water seeping and cracking the design. Pick a paper napkin in any pattern you want, this technique will work to make any style or size pot.
How do you decoupage a flower pot?
7:0512:05How to Decoupage and Weather proof a Clay Pot - YouTubeYouTubeStart of suggested clipEnd of suggested clipHand place your image down and you do not need wrapping pick up you don't need saran wrap here youMoreHand place your image down and you do not need wrapping pick up you don't need saran wrap here you just want to press the images down and I'm just going to go around the whole pot.
What kind of glue do you use on flower pot crafting?
A glue that contains marine epoxy is best for terracotta pots. The epoxy is strong and durable which will increase the lifespan of your terracotta pots. This epoxy is also waterproof so it will not get washed away when it rains or when watering the plant.
How do you put pictures on a flower pot?
Step 1: Paint the Flower Pot & Water Tray White. Using White acrylic paint, paint the flower pot and water tray.Step 2: Mod Podge Photos on the Flower Pot. After your photos are selected and printed. ... Step 3: Protect Your Photos. ... Step 4: Decorate the Flower Pot Rim. ... Step 5: Put a Plant or Flower in Your Pot.
What glue is used for decoupage?
Découpage glue – specifically for this craft and available from craft shops. It is perfect as it can be used as both glue and varnish. PVA glue – all round glue which dries clear and sticks paper, card, fabric, wood and metal. Spray glue (permanent type) - quick, easy and dries clear.
Can you decoupage outdoor pots?
Mod Podge Outdoor works really well for a covered porch or patio, but you'll want to avoid exposing your finished pots to rain or sun. This decoupage glue is water-resistant, not waterproof. If you start to see some wear and tear on your pots after some time, you can always re-apply a coat of Mod Podge Outdoor.
How do you glue plastic flower pots together?
0:5313:36$1 Flower Pot HACKS anyone CAN do!! NO SKILL NEEDED! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what i'm doing here is i'm taking my total tech and i'm running glue all the way around theMoreSo what i'm doing here is i'm taking my total tech and i'm running glue all the way around the bottom edge i flip this first pot upside down so i ran that glue all the way around the edge.
What glue can you use on TerraCotta pots?
epoxyFor cracked terracotta, use epoxy! It's best to work without having to rush when carrying out these repairs! Listed below are the features of two-part epoxy adhesives: Dry Clear. Form a very strong, rigid, durable bond.
What can I use to glue a ceramic pot?
The ideal glue for fixing broken ceramic is Loctite Super Glue Liquid Precision. This high-strength super glue forms strong and transparent bonds, which means that all repairs, however big or small, are barely noticeable and will last for a long time.
How do you decorate a plain pot?
Have a look:Stick custom waterproof stickers for your flower pots and express what you want to say with custom stickers ： ... Marble your boring flower pots with your old nail polishes: ... Turn a plain terra cotta flower pot to a cute fairy cottage: ... Rope-wrapped and painted terra cotta planters will bring a nautical feel:More items...•
How can we decorate flower pot?
24 Seriously Creative Ways to Spruce Up a Flower PotDecoupage a Design. Place of My Taste. ... Paint and Tie on Twine. Get the tutorial at pinkwhen.com.Stamp on a Label. Rustic and Woven. ... Knit a Cover. Get the tutorial at themerrythought.com.Stack 'Em Up. ... Stencil on a Pattern. ... Affix Twigs. ... Flip it On Its Head.More items...•
How do you make pots look pretty?
2:255:345 Easy Ways to Beautify Your Ugly Plastic Pots - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere's what you're going to need. Take your hot glue gun and secure the fabric to your pot.MoreHere's what you're going to need. Take your hot glue gun and secure the fabric to your pot. Basically i applied glue on the bottom middle. And at the top.
How do you decoupage terra cotta pots?
InstructionsCut the shapes out from the napkin and separate layers, saving the top layer with the design. ... Paint the clay pots using chalk paint. ... Add Mod Podge to the pot in a thin layer and place the napkin on top. ... Let dry and repeat with other napkin pieces and designs.More items...•
How do you waterproof a decoupage clay pot?
StepsIf you're painting a standard TerraCotta Pot, it's a good idea to put down a base coat of waterproof sealer on the inside and out! ... Separate the top layer of the napkin from the bottom. ... Apply a thin layer of Mod Podge. ... Apply Mod Podge to the edges to secure.Repeat as many times as you'd like!More items...•
Can you decoupage plastic flower pots?
That's the beauty of this idea – you can take a throwaway plastic pot, keep plastic out of the landfill, decorate with decoupage, then light up a dark corner of your home or bring a spot of joy to a friend. It's all good.
What is the best sealer for terracotta pots?
If you're looking to waterproof your terracotta garden pots and protect them against staining, water-based sealers (such as the Miteq Sealer 102) on the outside is the best product to use. These penetrating sealers sit just below the surface of pots and give them natural look and finish.
How to Mod podge on terracotta pots - Debbiedoo's
Now let me say….I love MOD PODGE! it was such a fun and easy project. I already had the terra cotta pots, all else I needed was my herbs. Ran over to Walmart and picked up three herbs I thought we would like….here is my finished little project.
How to cover a pot with photos?
Print out enough photos to cover your pot, on either dry inkjet or laserjet ink. This is to prevent smearing. Cut the photos out and set aside. Add a layer of Mod Podge to the planter. Choose one photo and smooth it down. Keep adding Mod Podge and photos until the planter is covered.
How long does it take to dry modge podge?
Keep adding Mod Podge and photos until the planter is covered. Smooth thoroughly to remove bubbles. Let dry for 15 - 20 minutes. Seal with three thin coats of Mod Podge, letting dry between coats. Use Mod Podge or hot glue to affix a length of ribbon around the rim of your planter.
How to make a bow for a planter?
Take a length of ribbon and hot glue the two ends together. Press the middle of the ribbon together in the center, and attach with another drop of glue. Take a smaller length of ribbon, wrap it around the middle, and hot glue it in place. Attach this bow to the planter and let cool/dry completely before using.
How to make a flower pot with ribbon?
Take a smaller length of ribbon, wrap it around the middle, and hot glue it in place (third picture above). Take your finished bow and attach it to your planter. And that’s it! Your DIY flower pot is complete. Add a plant, give a gift, and make someone’s day!
How to make a photo collage easier?
One way to make the photo collage process easier is to make a paper template of the pot - then scan into photo editing software.
How to decoupage napkins?
Most napkins come in 3 layers, and it's helpful to cut an edge of the napkin to expose the layers. Cut the napkin into the shapes you want to decoupage if needed.
How to remove edges of napkin?
Tip #4: Remove napkin edges with a paintbrush and water. Over the years, I’ve discovered that using a wet paintbrush helps to remove edges of your napkin for decoupage. When using napkins for decoupage, you have the choice to 1) apply the whole napkin or 2) cut out smaller portions to partially cover the pots.
How to use napkins for decoupage?
When using napkins for decoupage, you have the choice to 1) apply the whole napkin or 2) cut out smaller portions to partially cover the pots. I chose the first option, so I dipped a paintbrush in water to tear off any excess pieces of napkin around the rim and bottom.
How to remove a napkin from a pot?
Use plastic wrap to press the napkin onto the pot instead of using your fingers. This prevents the napkin from sticking to your fingers and makes for a smoother application. Use a paintbrush dipped in water to wet any edges of the napkin you want to remove. This helps to tear the napkin away easily without ripping it.
What can I do with decoupage?
Over the years, I’ve used decoupage to upcycle old picture frames, decorate wooden spoons, and make DIY wood signs. Each project was a bit unique and required slightly different techniques.
What paint should I use on pots?
If you’ve sealed the pots already (which I hope you did), you can use chalk paint or, better yet, outdoor acrylic paint for this purpose. I like the matte finish of chalk paint, but it’s totally your choice. Spray paint is another perfectly good option.
Is modge podge waterproof?
Mod Podge Outdoor is water-resistant, not waterproof. Always keep decoupage flower pots in a covered area like a porch or patio where it will not receive direct sunlight or rain.
What is the difference between varnish and polyurethane?
The basic difference between varnish and polyurethane is that a varnish is a thicker layer than polyurethane. Both work as a sealant to a surface. The key to a successful sealant application is to get the surface clean and dry. There are online comparisons to the specific differences if you have issues with the material content of the sealant.
What to do with a flower pot?
Flower pots are a great way to display your favorite plants on your patio, balcony, and window sill. Instead of buying a fancy one, why not make your own using decoupage glue and pretty, patterned paper? With the right preparations, you can make it waterproof too! You can also use the pot to store craft supplies on your desk, such as pens and pencils.
What to do if you can't find waterproof sealer?
If you can't find any waterproof sealer, line the inside of your pot with a cheap, plastic pot instead.
How to clean a pot with rough edges?
If the pot has any rough edges, buff them away with some sandpaper . Be sure to wipe the pot down again when you are done.
How to get paint off of a pot?
Even if you bought your pot brand-new, it may still be covered in dust. This can prevent the paint and glue from sticking. Wipe the entire pot, inside and out, with a damp sponge, then set it out to dry. If the pot has any rough edges, buff them away with some sandpaper.
How long does it take for acrylic paint to dry?
Acrylic paint dries quickly, so you'll only have to wait 15 to 20 minutes between each coat. When you are done painting, let the pot dry completely. You can paint the pot any color you want, but something that matches the background of your paper will work the best.
How to keep dirt from falling through a flower pot?
Use the flower pot. If you plan on putting a plant into it, line the bottom with a coffee filter, a scrap of fabric, or a piece of window screening. This will help keep the dirt from falling through the hole at the bottom. You can also use the flower pot as a pencil holder on your desk, or as a piece of decoration.
How to make a flower pot with modge podge?
Instructions for Mod Podge Flower Pots: Step 1: Place your flower pot in the right corner of your fabric, leaving about 1 1/2″ of fabric from the edge of your pot. This allows you to have enough fabric to fold over the lip of your pot . Roll your flower pot from left to right in an arch shape and trace the arch shape onto your fabric, ...
How to make a pot with a slit?
If you have excess fabric, first cut it so the seam overlaps by only 1/4″ or so. Step 5: Cut the excess fabric off the bottom of the pot. Step 6: Cut slits in the fabric on the bottom of the pot every 1 1/2″-2″; coat with Mod Podge and press down. Step 7: Repeat steps 5-6 on the top of the pot. Step 8: Allow the pot to dry before sealing ...
