Slide Over Bolts Method
- Locate the studs behind the brick, stone, or faux veneer.
- Drive 1/2in lag screws through each of the studs. ...
- Have a helper support the mantel while you mark the location of the support rods on the back of the beam. ...
- Apply construction adhesive into the holes. ...
- Slide into place, admire, and enjoy!
- Measure the fireplace surround. ...
- Determine the size of your mantel. ...
- Mark the mounting locations. ...
- Drilling holes and installing anchors. ...
- Mark and cut the bolts to length. ...
- Mark and drill holes in the mantel. ...
- Mount the new mantel.
How to install a mantel on a ceiling?
Place the mantel over the cleat with the opposing mantel cleat oriented upward. Press down onto the cleat to insure a proper fit and seat. Use the provided wood screws to fasten the mantel to the cleat from the top, back edge of the mantel. 5. Get Caulky
How do you mark the edges of a mantel?
Mark the territory. Using a piece of chalk or a pencil, make an outline around the edges of the mantel, both along the top and the sides of the fireplace. Once the marking is complete, pull the mantel away from the fireplace and position it face down on a smooth surface.
How to install a mantle shelf above a fireplace?
You can use nails to attach the molding. Apply wood putty to cover the screw heads, taking care to smooth the putty evenly with the surface of the mantel. Allow the putty to dry, and then paint to hide the holes completely. Position the shelf on the wall. Determine the exact placement of the mantel shelf above your fireplace.
How do you attach a mantel to a wood desk?
One cleat runs horizontally under the mantel shelf, and the others run vertically inside the legs (most mantels are hollow in back). Then you screw the mantel to the cleats along the back of the mantel shelf and the sides of the legs. 1. Assemble the Mantel Pieces Sand, then prime or stain the mantel before you begin.
How deep should I put a mantel?
How high should a fireplace mantel be?
How many studs do I need for a mantel?
How to install lag screws into wood studs?
Can you make a live edge slab mantel?
Do you need a rubber mallet to put a mantel in place?
Can you drill straight for brick mantel?
See 2 more
How do you attach a live edge shelf?
5:196:57How to Install a Live-Edge Floating Shelf - YouTubeYouTubeStart of suggested clipEnd of suggested clipThread the set screws into the small holes on the base plates of the shelf posts attach the shelfMoreThread the set screws into the small holes on the base plates of the shelf posts attach the shelf posts to the wall posts with the pan panhead hex bolts. Taking care to orient the shelf posts.
How thick should a live edge mantle be?
around 3.5 to 4 inches thickMost live edge style mantels are around 3.5 to 4 inches thick.
How do you attach a mantel surround to the wall?
2:063:17Builders Choice Fireplace Leg, Skirt and Mantel Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipDrive a minimum of three fasteners. Apply construction adhesive to the top of the mantel mounting.MoreDrive a minimum of three fasteners. Apply construction adhesive to the top of the mantel mounting.
How do you attach a floating mantel?
How to Install a MantelRemove the old mantel.Add support by drilling holes for lag shields, then install lag bolts into the brick.Measure carefully and drill corresponding holes for the wood mantel.Push the wooden mantel carefully into place using wood glue for extra support.More items...•
How far should mantle stick out?
The building codes will typically determine the height to place the mantel from the hearth, and the distance from the firebox. As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes.
How many inches off the ground should a mantle be?
Mantel Height: We recommend installing the mantel 4.5' from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
How do you anchor a mantle to drywall?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
How do you fix a mantle beam to the wall?
2:134:41Celtic Timber Oak Beam Mantle Installation Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the 10 millimeter masonry drill bit drill a 70 millimeter deeper hole where you've marked forMoreUsing the 10 millimeter masonry drill bit drill a 70 millimeter deeper hole where you've marked for the brackets to be installed in the wall. Keeping. The drill straight and level as you do.
How do you attach a heavy mantle?
Carefully cut out a tight notch from the corbel where the stud can sit. Use bolts through the corbel and stud to fasten them together. Install the masonry or sheetrock around the fireplace and finish it. Apply adhesive to the top of your corbels, position the mantel where it will sit, and clamp it until dry.
How are floating fireplace mantels attached?
How Are Fireplace Mantels Attached? Standalone floating fireplace mantels can either be attached to a wall using lag screws or installed onto a back board, while mantels as part of a complete fireplace surround may be screwed into the wall using brackets.
How much weight can a mantle hold?
How much weight will a mantel shelf hold? The general rule for floating shelves or floating mantels is that it can hold 50 lbs for every stud it's attached to. For example, if you hang our 36” mantel onto two studs, it should safely hold 100 lbs.
How do you make a fireplace mantel float?
0:105:22How to Build a Floating Mantel | Fireplace Wooden Mantel DIYYouTubeStart of suggested clipEnd of suggested clipThis is a floating style. So the majority of the structure. Is on the inside of what i'm building.MoreThis is a floating style. So the majority of the structure. Is on the inside of what i'm building. These two by fours create the structure that will make my mantel shelf very. Strong.
How thick should my fireplace mantel be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
How thick should a live edge shelf be?
How thick should a live edge shelf be? A live edge shelf should be at least 1 1/2″ thick, but preferably at least 2″. What is this? Most floating shelf hardware is going to include a bar or backer to the bracket that is 1 1/2-2″ wide, so the piece of wood should be thick enough to cover that.
How thick should I cut live edge slabs?
*Cut slabs a minimum of 2" thick to minimize warping. Saw thicker slabs for specific purposes or projects. If you want to use the warp-prone pith (the log's center), cut it as a 4–5"-thick slab, as shown at right.
How thick should the wood be for a live edge table?
three inchesFor the best results, live edge wood should be milled to at least three inches in thickness. This size is sufficient to handle any changes that will naturally occur during the drying process. Reputable sawmills know that if they mill the wood slab any thinner than three inches, the wood can become twisted and warped.
How to Install a Heavy Slab Floating Mantel | Hunker
How to Install a Heavy Slab Floating Mantel | Hunker ... Loading...
How deep should I put a mantel?
Determine the size of your mantel. After measuring for your new mantel, decide how deep you want it to be. I recommend going no deeper than 10” due to weight. The mantel in this project is 8” deep. I found that to be enough shelf space to decorate and still look beefy. The thickness is also something to take into consideration. My new mantel is 3” thick, but you could definitely go with something slightly smaller. Just keep in mind the size bolts you’re using and plan accordingly.
How high should a fireplace mantel be?
Mark the mounting locations. The most common height of a fireplace mantel is between 52” and 58”. Find the center of the fireplace and make a mark at the desired height. Next, measure 10” each way (left and right) and mark those locations as well. Make your marks on the actual bricks as the mortar might be too brittle to hold the weight of your new mantel. Use a level on your marks to make sure your mounting hardware will be level.
How many studs do I need for a mantel?
If mounting into wood studs, be sure to mount the new mantel into at least three studs. Where I live studs are 2” x 4” (actual 1.5” x 3.5”), so that means three studs add up to be 4.5” plus the standard 16” stud spacing means I would need a mantel at least 42.5” in length to span three studs with 3” past each stud on each end. The three extra inches on each end would make sure you’re not drilling into the edges of new mantel.
How to install lag screws into wood studs?
For installing into wood studs, you simply drive the lag screws into each stud location as straight as possible.
Can you make a live edge slab mantel?
Creating projects from slabs is one of my favorite things to do and this live edge slab mantel is no exception . The fireplace in my home needed a makeover, so I decided to start by whitewashing the brick and making a floating live edge slab mantel. This step-by-step tutorial is for mounting a mantel on a brick fireplace surround, but can be followed for different types of fireplaces.
Do you need a rubber mallet to put a mantel in place?
You may or may not need to use a rubber mallet or some other type of persuasion to fully seat the new mantel into place.
Can you drill straight for brick mantel?
The first thing I want to mention here is to be sure to drill straight as possible when drilling for the drop-in anchors into brick. Drilling holes at different angles here will make it very difficult to install the mantel later. In fact, I had to cut out one of my bolts during the actual installation process due to it being at a slight angle… different than the rest. Luckily, the other four bolts were enough in unison that the mantel slid into place.
This is TOO EASY
You know that person who makes everything look easy and then doesn't hesitate to rub it in by actually telling you "it's too easy"? Yeah I think we all kind of hate that person but secretly wish we could be checking our to-dos off that easy. However, installing that mantel to the wall might be your chance to feel like the do-all pro.
2. Mark your studs
Make sure you are happy with the location that you have selected and determine the height that you would like the top of the mantel to be at when installed. Make light marks with a pencil for easy removal of markings and use the magnet or stud finder to locate the studs.
3. Install the Cleat
If you have purchased a mantel from Rustica at https://rustica.com/indoor-mantels/ then you will have a cleat and all the mounting hardware for installation. Line up the top corner edge of the cleat with the previously marked horizontal and vertical marks.
4. Hang the Mantel
Now it's really just that easy. Place the mantel over the cleat with the opposing mantel cleat oriented upward. Press down onto the cleat to insure a proper fit and seat. Use the provided wood screws to fasten the mantel to the cleat from the top, back edge of the mantel.
5. Get Caulky
You may choose to run a bead of caulk around the perimeter of the mantel where it meets the wall to cover any gaps that may be exposed in the wall. Then to finish it all off repeat these words; "this is TOO EASY".
How far away should a fireplace mantel be?
The National Fire Code says that all combustible material must be 1 inch away from the firebox opening for every 1/8 inch it protrudes from the surface, with a minimum 6-inch clearance all around.
Where do you screw a mantel to the cleats?
Then you screw the mantel to the cleats along the back of the mantel shelf and the sides of the legs.
How to measure for cleats on a mantel?
With the mantel face-down on the floor, measure the inside width of the shelf to determine the length of the horizontal cleat. Cut a 2x4 to this measurement and dry-fit it in place inside the shelf. (On some mantels, the cleats may have to be installed in pieces to accommodate blocking.)
How to install finish screws on a shelf?
Turn off the drill's hammer action. Use a driver bit to drive 2-inch finish screws every 16 inches along the back of the shelf above the center of the top cleat. Do the same through the outer edges of the legs (not the face) into the side cleats. Set the screwheads just below the surface so they can be concealed later.
What are the safety concerns of a new mantel?
When dealing with a new wood mantel, there are two major safety concerns: making sure the mantel isn't too close to the fire, and securely attaching the heavy piece to the wall so it doesn't fall over.
How to lock cams on shelf?
Slide the legs onto the shelf, slotting the dowels into their holes. Wiggle the legs as you apply slight pressure until the leg seams are tight. Twist the screws a quarter-turn to lock the cams. Hardware varies among manufacturers, but placing the shelf top-down and sliding the legs on is usually the safest method. 2.
Can you hang a mantel on the wall?
If you’re bored with your mantel’s appearance, why not rip it out and get a new one? The chimney is permanent, but the mantel's just a front. It's basically a frame for the fire, an extremely elaborate piece of molding. Sharp, detailed models come in kits that lock together with a few twists of the Phillips-head. To hang them on the wall, you simply attach them to a couple of screwed-on pieces of lumber; as This Old House technical editor Mark Powers shows, the whole job takes less than a day.
How deep should I put a mantel?
Determine the size of your mantel. After measuring for your new mantel, decide how deep you want it to be. I recommend going no deeper than 10” due to weight. The mantel in this project is 8” deep. I found that to be enough shelf space to decorate and still look beefy. The thickness is also something to take into consideration. My new mantel is 3” thick, but you could definitely go with something slightly smaller. Just keep in mind the size bolts you’re using and plan accordingly.
How high should a fireplace mantel be?
Mark the mounting locations. The most common height of a fireplace mantel is between 52” and 58”. Find the center of the fireplace and make a mark at the desired height. Next, measure 10” each way (left and right) and mark those locations as well. Make your marks on the actual bricks as the mortar might be too brittle to hold the weight of your new mantel. Use a level on your marks to make sure your mounting hardware will be level.
How many studs do I need for a mantel?
If mounting into wood studs, be sure to mount the new mantel into at least three studs. Where I live studs are 2” x 4” (actual 1.5” x 3.5”), so that means three studs add up to be 4.5” plus the standard 16” stud spacing means I would need a mantel at least 42.5” in length to span three studs with 3” past each stud on each end. The three extra inches on each end would make sure you’re not drilling into the edges of new mantel.
How to install lag screws into wood studs?
For installing into wood studs, you simply drive the lag screws into each stud location as straight as possible.
Can you make a live edge slab mantel?
Creating projects from slabs is one of my favorite things to do and this live edge slab mantel is no exception . The fireplace in my home needed a makeover, so I decided to start by whitewashing the brick and making a floating live edge slab mantel. This step-by-step tutorial is for mounting a mantel on a brick fireplace surround, but can be followed for different types of fireplaces.
Do you need a rubber mallet to put a mantel in place?
You may or may not need to use a rubber mallet or some other type of persuasion to fully seat the new mantel into place.
Can you drill straight for brick mantel?
The first thing I want to mention here is to be sure to drill straight as possible when drilling for the drop-in anchors into brick. Drilling holes at different angles here will make it very difficult to install the mantel later. In fact, I had to cut out one of my bolts during the actual installation process due to it being at a slight angle… different than the rest. Luckily, the other four bolts were enough in unison that the mantel slid into place.
Supplies Needed
Step-By-Step Instruction
- Step One
Measure the fireplace surround. The first step in preparing for the mantel is to measure the actual fireplace surround. Figure out the maximum length of mantel needed without extending past the fireplace surround. If mounting the new mantel into brick, avoid drilling holes near the edge to pr… - Step Two
Determine the size of your mantel. After measuring for your new mantel, decide how deep you want it to be. I recommend going no deeper than 10” due to weight. The mantel in this project is 8” deep. I found that to be enough shelf space to decorate and still look beefy. The thickness is als…
Final Thoughts
- What I Learned
I have hung many projects on the wall before and even made floating type shelves, but never a mantel onto brick. I reached out to John Maleckibefore I got started to get his expertise on a mounting solution. So, thanks goes out to John for guiding me in the right direction. Not only di…
Previous Project
- The Sliding Barn Door Project
Click herefor the sliding barn door project post.
Get Social & Share
- I’d like to hear from you and see what you’re up to. Reach out to me on Instagram and Facebook or Twitterwith pictures of what you’re working on. Also, please share this post with your friends and family.
Learn More About Us
- Are you new here and don’t know where to go next? Click here: http://www.stoneandsons.net/starthere/ About us and our story: http://www.stoneandsons.net/about/ Stay in the loop with our projects: http://www.stoneandsons.net/newsletter/ See our project plans: http://www.stoneandsons.net/p…