Installing your tool box requires just a few steps:
- Measure the area in which your tool box will be placed.
- With your power drill and a sturdy metal bit, drill four to six holes. Make sure these holes line up with those...
- Set the tool box inside the truck bed, aligning its holes with the ones you just drilled.
- Secure your tool box with either J-hooks or a set of nuts and...
How do you install a tool box in a truck bed?
First, determine where you’re going to place the tool box in your truck bed. Most people choose to install truck boxes directly behind the cab. Wherever you choose, just make sure you can easily open the tool box. Measure the width of the box, and then cut rubber or foam padding to place on your truck rails to protect from scratching.
How do I choose the best truck tool boxes?
Before shopping for a truck tool box, take careful measurements of your truck bed and consider the make and model of your truck. Choose a toolbox designed to fit the design of your truck. Once you receive the tool box, place it in the back to ensure it fits properly before continuing with installation.
How to mount a truck tool box with pre-drilled holes?
Learning how to mount a truck tool box with pre-drilled holes is quite simple. Step 1: First, remove the rubber plugs from the pre-existing holes. With those plugs removed, the bottom of the tool box you choose should nestle down to align with the pre-existing holes.
How to measure a toolbox properly?
You have to use measuring tapes to get the box’s exact width, length, and height. Without proper measurement, you can’t install the toolbox correctly.
How do I fasten my truck toolbox?
2:008:12Easy Truck Tool Box Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this whole kit it's all steel. So yeah I would rather pay five dollars for steel Hardware ratherMoreSo this whole kit it's all steel. So yeah I would rather pay five dollars for steel Hardware rather than some not-so-good bolts and plastic pieces for like 20 bucks. So I've already got it out of the
How do you secure a toolbox without drilling?
You can then use the hardware that the tool box came with or J-hooks or nuts and bolts to secure the box. If you need to purchase the hardware, most tool boxes require between four and six bolts. Once installed, tighten the bolts or hardware. Be careful to not overtighten them as they can damage your truck.
How do you install a top mount tool box?
1:002:04Side Mount Truck Box Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure you've measured the offset locations carefully and drill the holes three and three-eighthsMoreMake sure you've measured the offset locations carefully and drill the holes three and three-eighths inches apart secure the box to the top of the bed rail.
How do you strap down a tool box?
0:454:46How to Use a Trucker's Hitch to Secure a Toolbox - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the working end against the standing end and tug it all tight to look like this. Now we wrap aMorePull the working end against the standing end and tug it all tight to look like this. Now we wrap a rope around the toolbox. Pull out the handle. And go behind it to keep the Rope tight to the box.
How do you install a truck chest tool box without drilling?
1:262:25How to Install a Toolbox in Your Truck Without drilling holes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'll try to show you back here why it stuck. So I don't know if you can see that or not butMoreAnd I'll try to show you back here why it stuck. So I don't know if you can see that or not but here's the hook right there. So just hooks up underneath. There hold it in place. And then you wanna do
How do you mount a tool box in a truck bed?
0:111:11How to Install Dee Zee Truck Bed Tool Box - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside the toolbox. And near the lip of the truck bed rail drill. The holes with a 3/8 drill bitMoreInside the toolbox. And near the lip of the truck bed rail drill. The holes with a 3/8 drill bit then secure the toolbox to the bed with the J bolts flat washers and hex nuts.
How do you mount a flatbed toolbox?
0:194:37Installing a flatbed toolbox - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there are our runners bolt it in place to take up the gap. Between the top of the box and theMoreAnd there are our runners bolt it in place to take up the gap. Between the top of the box and the bottom of the crossmember. Because when the box comes out it's got to come underneath.
How do you secure a toolbox on a ute tray?
It is simpler to give these a wide berth and stick with a bolted connection. Another novel approach we would not recommend is a bead of silicone or construction adhesive applied to the tray, and which the box has been allowed to set overnight on top of. This can actually create a secure fix.
How do you secure a tool chest to the wall?
0:001:27Snap-on UK Snap-Lock toolbox security - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust locate the fixed wheel into its housing drop the snap lock arm down and simply push the toolboxMoreJust locate the fixed wheel into its housing drop the snap lock arm down and simply push the toolbox. Back the wheel rotates automatically. And upon contact with the box the arm snaps shut.
How do you secure a rigid box in a truck?
3:075:37How to install Job Box tool box in the bed of a pickup truck - YouTubeYouTubeStart of suggested clipEnd of suggested clipTwo in the front two in the back. So my plan is to get the first two drilled and mounted. And then IMoreTwo in the front two in the back. So my plan is to get the first two drilled and mounted. And then I'll measure back to the back of the bed. There. From those two and drill those as well.
How do you transport a mechanic toolbox?
0:203:44How to move a heavy tool box - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut once we get it moving it does go up quite easily. Once it's in the van. I then drag it round soMoreBut once we get it moving it does go up quite easily. Once it's in the van. I then drag it round so that it's in the correct.
How do you attach an undertray toolbox?
0:502:06ToolPRO Undertray Tool Boxes + How to Fit // Supercheap Auto - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply a silicon free sealant around the new holes. Once. Everything is tightened up your toolboxesMoreApply a silicon free sealant around the new holes. Once. Everything is tightened up your toolboxes are ready to be loaded. Give each toolbox are a bit of a nudge every.
How do you mount a Craftsman toolbox?
0:461:52Installing Grip Rite Tool Box Mounts - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace your toolbox into position over the grip right mounts on the truck bed rails align.MorePlace your toolbox into position over the grip right mounts on the truck bed rails align.
Where to put tool box on truck bed?
Step 1: Decide where you’re going to place your tool box. (A standard crossover box will go toward the front of your truck bed cargo bay. ) Be careful during this step. You want to balance having as much space in your truck bed behind the tool box and getting the tool box too close to the cap and not being able to open it all the way or busting your rear camera.
Why do you need a tool box?
Some tools and specialty equipment cost a whole lot, so you want to keep them in good shape. A high-quality tool box stores and organizes your tools and protects them from harsh weather and low-life thieves who want what you have.
How much brain is in a truck tool box?
More than 1/4 of a standard human brain. Installing a truck tool box is not rocket science, but you can’t go in there with nothing.
How long does a tool box last?
Sustainable, long-term solutions. Ideally, a good tool box will last for years —possibly even longer than the tools you’re carrying. The more rugged and sturdy the construction, the better.
Do you need to measure a tool box?
Some new tool boxes come with everything you need for installation. If not, you’ll need to measure it and make sure you’re getting the right sized foam padding and any nuts, bolts, or screws necessary. Most tool boxes use J-bolts for secure installation.
Can you climb into a truck bed from a ladder?
Caution: Don’t climb into the truck’s bed from the ladder. It could swing into the truck and cause exterior damage (the ladder is designed for the user to reach over the sides).
Do you need to drill holes in a tool box?
The exact tools you need depend on the type of tool box you have. Some might require you to drill holes. Most tool boxes will require at least the below things, though, so get this stuff together before you begin.
How to tighten a toolbox?
To tighten the toolbox, you need to use a wrench or any kind of spanner. Be careful while putting the pressure to compress the box. Excessive stress and little pressure will make trouble. Too much pressure can damage the bed rails, and little pressure won’t tighten the box, which is risky.
What type of fastener do you use to attach a toolbox?
It’s a lot easier to mount a plastic container, but metal toolboxes are heavy to handle. You can use J-bolt-type fasteners and tool belts to attach the toolbox accurately.
Why Do You Need A Truck Toolbox?
A truck toolbox is a very necessary piece of equipment. Toolboxes provide many quality benefits to us. Also, you will get benefits if you install a truck toolbox. The benefits below you will get after mounting a toolbox in your truck:
Why are toolboxes so popular?
Toolboxes have now become very famous all over the world. Many reasons are running behind its getting popular. All the reasons are mainly the benefits that a toolbox can provide. Toolboxes are very necessary not only for the benefits but for our expectations. We all want to keep the essential tools safe and nearby. In bad weather, this box keeps safe all your cargo and gears, which increases the durability of the tools uses. But the main confusion is between do we need to drill for installing the toolbox in the truck or don’t. And the answer is, of course, you can install it without drilling.
What is the best toolbox for a truck?
And you can buy one of the toolboxes to store all the essential elements on a friendly budget. CMST82765BK is the best truck Tool Box under 500 dollars that you can buy for yourself.
Why is it important to have a toolbox in your truck?
Safety is the priority of having a toolbox for your truck. It can protect all your important and expensive tools from being lost. Sometimes keeping tools in the truck’s bed will become damaged, rusty, unuseful, and stolen.
Can you hook a toolkit to aluminum?
Always use the specific nuts and bolts. Specific toolkits are easy to hook with aluminum blocks. Make sure that these toolkits are tight enough.
How to tighten a bed rail?
Open the tool box to expose the interior. From underneath the box, insert the hook of the j-bolt under the bed rail and poke the threaded part through the rubber plug. Apply a washer from the hardware kit and then tighten in place. Do this with all four j-bolts. You’ll want to make sure everything is tight to prevent loosening, but not tight enough to damage the bed rails.
How to protect truck rails from scratching?
Wherever you choose, just make sure you can easily open the tool box. Measure the width of the box, and then cut rubber or foam padding to place on your truck rails to protect from scratching. If you have a bed liner in place, you can skip this step.
Do you need to drill holes in truck bed rails to install toolbox?
Most toolboxes require only simple hand tools you probably have in your truck right now. Minor drilling may be required to install your toolbox – a few simple holes through the inside of the bed rails may be needed to securely mount your box.
Find the Right Tool Box
Before shopping for a truck tool box, take careful measurements of your truck bed and consider the make and model of your truck. Choose a toolbox designed to fit the design of your truck. Once you receive the tool box, place it in the back to ensure it fits properly before continuing with installation.
Add Rubber or Foam Padding
A metal tool box can scratch a metal truck bed and be incredibly noisy as you drive over uneven ground. Protect both the truck bed and the toolbox while making transit nice and quiet by laying down a layer of rubber or foam padding.
How to Install a Truck Tool Box Without Drilling
Many of today’s trucks come outfitted with pre-drilled holes to make installing a tool box fast and easy.
How to Install a Truck Tool Box with Drilling
Some truck models don’t come with pre-drilled holes. In this case, there’s one more step to follow: drilling the holes yourself.
Make Sure Everything Works Properly
Once you’ve tested the lid to make sure it opens and closes freely, all that’s left to do is load it up with your essentials.
