How to Move Sprinkler Heads in Five Easy Steps
- Plan the Move. Decide which sprinkler head needs to be moved and where the best new location will be. ...
- Dig a Trench. Dig a trench between eight and 12 inches deep and four to six inches wide, running from the current location of the sprinkler head ...
- Insert Flex Pipe. ...
- Fasten Another Elbow. ...
- Flush the System and Fill the Trench. ...
Full Answer
How to replace a sprinkler head without digging?
- Clear grass and dirt from around the top cap of the head.
- Unscrew the cap to the left, using the pliers if necessary. (See image below)
- Remove the cap and internals. It will look like a big spring.
- Make sure the body of the head stays in the ground.
- Rinse off the cap so you can see the make and model.
- Try to keep dirt from falling in the body.
How far must sprinkler heads be from a wall?
All standard sprinkler heads—pendent, upright, and sidewall—have the same minimum sprinkler distance from walls: four inches. For sidewall heads, that's the distance from an end wall (10.3. Beside above, how far apart are fire sprinkler heads? between 12-15 feet Consequently, how much area does a sprinkler head cover?
How do I Activate my sprinklers manually?
How do I activate my sprinklers manually? There are two active methods that you can use to activate your sprinklers manually. 1. You can manually run a zone by selecting the “water drop” icon on the controller card present in the Rain Bird App home screen 2. You can manually run each program or zone by accessing the controller card and ...
How to repair or replace a broken sprinkler head?
How to Replace a Sprinkler Head on an In-Ground Sprinkler System
- Shop for the right replacement sprinkler head. The first step in how to change a sprinkler head involves finding a replacement. ...
- Dig up the broken sprinkler head. After finding the right replacement, it’s time to start the sprinkler head repair. ...
- Unscrew the old sprinkler head. ...
- Attach the sprinkler head replacement. ...
- Test the new sprinkler head. ...
Why is it important to move an inground sprinkler head?
How to dig around a tree and root?
About this website
How to relocate a sprinkler head - YouTube
Items used in this video:Hunter PGP Rotor: http://amzn.to/2xaDhuFHunter PGP 5 Pack Rotors: http://amzn.to/2xc0LPOClamp Pliers : http://amzn.to/2kiYgWb100 Pac...
How to Move Inground Sprinkler Heads | eHow
An in-ground sprinkler system can help you maintain a beautiful, lush lawn and flowers. However, sometimes as your yard matures and changes, trees or other objects can block the spray from your sprinkler heads. When this happens, the easiest thing to do is relocate the head.
Moving Sprinkler Head - Houzz
It is a sprinkler head, for the sprinkler system. See attached. I realize I need approval and I realize it has to be approved etc etc. But I dont know if doing that is generally a simple thing (like moving location of tap) or a much more difficult thing.
How do I move a sprinkler head?
I’ve removed the dead grass from around the sprinkler head to dig it up. If the head you want to move is in the lawn and you want to keep the grass there, you will want to dig up large chunks of grass. Keep the soil on the roots—digging as deep as you reasonably can. As you go, set the pieces of grass aside in the same order you dug them up like you’re putting together a puzzle. If you can, put the pieces in a shady location and water them. Water repeatedly if it’s a real hot day or if the job is taking longer than you thought.
Where is the sprinkler head coupler installed?
The coupler is installed in the pipe. You can still see the coupler but there will be plenty of water flow through it and you now have the extra pipe for your sprinkler head.
How to remove funny pipe from sprinkler head?
I’m going to reuse the elbow at the bottom of the sprinkler head, so I don’t want to destroy it. Using a box knife, cut a slit through the funny pipe then pull it off using pliers to pull if necessary .
What is the tubing on a sprinkler head called?
This is what you’ll find when you dig up the sprinkler head. The body of the sprinkler head is connected to a flexible, black tubing called funny pipe or swing pipe. This is what you will use to extend your sprinkler head.
How to reattach funny pipe?
For re-attaching and extending the pipe you will need one funny pipe insert coupler (or funny pipe compression coupler) and a piece of funny pipe. Measure the distance of funny pipe you need. It is sold as “funny pipe” at Home Depot and Ace Hardware. Any brand is fine. Funny pipe is sold in 3 foot lengths and 100 foot lengths and sometimes in-between. If you need 5 or 6 feet, just use two 3 footers and join them together with another coupler.
What to do if pipe is too long?
If your pipe is a little bit to long, just bend it around in the trench —it’s not that big of a deal. If you cut too short, well, you will need another coupler.
What tools do you need to cut a pipe?
There are several tools you can use to cut the pipe. You can use a ratcheting pipe cutter, the one in this picture is Rainbird’s pipe cutter or, if you don’t have either of these tools, you can use a box knife.
Why is it important to move an inground sprinkler head?
Moving an inground sprinkler head is not a difficult task, and it is an important one to learn because it means the difference between an unchanging landscape and one that can grow and change over time.
How to dig around a tree and root?
Instead, use a small trowel to tunnel underneath.