Finishing Drywall Outside Corners
- Step 1: Apply Metal Exterior Corner Bead to Outside Corner Measure and cut metal corner bead to fit the corner. ...
- Step 2: Apply the First Coat of Drywall Mud ...
- Step 3: Trim the Drywall Mud Coat ...
- Step 4: Second Coat of Drywall Mud ...
- Step 5: Later Coats of Drywall Mud ...
- Step 6: Sand the Surface ...
- Step 7: Prime and Paint ...
- APPLY DRYWALL TO CORNERS. Apply drywall over one side of the corner then the other, using adhesive and screws.
- MEASURE AND CUT METAL STRIP. ...
- NAIL THE BEAD TO THE WALL. ...
- APPLY DRYWALL COMPOUND TO THE BEAD. ...
- LET THE FIRST COAT DRY OVERNIGHT AND APPLY SECOND COAT. ...
- APPLY THIRD COAT.
How to finish drywall in 9 steps?
Instructions
- Prepare the Surface. ...
- Apply the First Mud Coat (Paper Tape) If you are using paper tape, it must be embedded in a layer of compound, and thus the process takes slightly longer than ...
- Apply the First Mud Coat (Fiberglass Tape) Fiberglass-mesh tape is self-adhesive and can be applied directly to the drywall seams without first applying a layer of mud.
How to finish drywall for beginners?
Project Overview: how to finish drywall
- Tips Before Taping: Making the joints in freshly hung drywall disappear behind a smooth, flawless taping job will try your patience.
- Check for underdriven screws and nails. ...
- Tap nails slightly below the drywall face. ...
- Trim away loose, torn paper with a sharp utility knife. ...
- Spray a stain-blocking primer. ...
- Nail metal corner bead. ...
How to choose the right drywall mud for your project?
Some Final Tips on Using Drywall Mud
- For covering holes in the quickest time, use the dry hot mud. ...
- To finish an entire room, again opt for the powder compound as this is the best choice that provides a professional-looking finish on large drywall surfaces.
- When texturing a large drywall area, use an sll-purpose pre-mixed compound. ...
How to finish inside drywall corners?
To use inside corner bead:
- Try inside corner bead for interior walls.
- Measure the height of the corner.
- Cut the inside corner bead to fit the height of the corner.
- Press the corner bead into place.
- Secure the corner bead to the drywall with drywall screws.
- Apply several coats of joint compound over the corner bead until you achieve a smooth finish.
What is drywall mud?
Powdered. Powdered drywall mud, also called “setting mud” or “hot mud,” contains chemicals that react when water is added to hasten hardening time. This type of mud tends to shrink less than all-purpose premixed mud but it begins to harden very quickly.
How to protect drywall from mud splatter?
STEP 1: Protect the floor and yourself from drywall mud splatter. Cover the floor with a canvas drop cloth (plastic drop cloths can become dangerously slick) and don goggles and old clothing. Mudding is a messy process, and splatters can sting if they get in your eyes. Advertisement.
How to use paper tape in mud?
Smooth the paper tape carefully in the wet mud, using either a 6-inch taping knife or an inside-corner taping tool that features a preformed 90-degree shape for easy bedding. Use light stroking movements to bed the tape without dislodging it from the corner. Wipe excess mud from the walls.
How to make a mud sanding tool?
With the 6-inch knife, apply a thin coat of mud to both sides of an inside corner, making sure to work it all the way into the center. Cut, fold, and fit a strip of pre-creased paper tape in the corner over the wet mud. Smooth the paper tape carefully in the wet mud, using either a 6-inch taping knife or an inside-corner taping tool that features a preformed 90-degree shape for easy bedding. Use light stroking movements to bed the tape without dislodging it from the corner. Wipe excess mud from the walls.
What is tape used for in drywall?
During the mudding process, tape acts as a bond to keep the finished wall from developing cracks along the drywall seams. The different types of tape are “paper,” “mesh,” and “preformed”—and all three have their pros and cons.
How to smooth mud from a joint?
Cut and fit a piece of paper tape over the joint while the mud is still wet for a process called “bedding.” Use the 6-inch taping knife to gently smooth the paper onto the wet mud, working out bubbles as you go. Wipe away excess mud with the knife.
How wide is a dry wall?
Drywall panels come with slight bevels on both of their long sides. When the bevels are fitted together, they form a small indentation, about 2 inches wide, along the joints. Use the 6-inch taping knife to smooth and work the mud evenly into the joint, filling the entire indentation and wiping away excess mud.
