First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
How long does it take to open a Whirlpool washing machine?
Where to find end caps on washing machine?
About this website
How do you take apart a whirlpool agitator?
0:545:36Whirlpool/KitchenAid/Maytag Complete Agitator Assembly 285565YouTubeStart of suggested clipEnd of suggested clipYou're gonna have either a fabric softener dispenser here which you can just pull off or you'reMoreYou're gonna have either a fabric softener dispenser here which you can just pull off or you're gonna have the agitator cap. If you have the agitator cap you want to spin it around.
How do I open my agitator?
0:482:32How To: Whirlpool/KitchenAid/Maytag Agitator Assembly WP3951744YouTubeStart of suggested clipEnd of suggested clipYou'll need to remove the fabric softener dispenser to do so simply pull straight up and it'll comeMoreYou'll need to remove the fabric softener dispenser to do so simply pull straight up and it'll come off. You'll now need to remove the barrier cap to do so simply pull up and it'll come right out.
How do you remove the agitator from a Whirlpool top load washer?
0:061:02Whirlpool Top Load Washer Agitator Assembly #3951744 - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a 7/16 inch socket to remove the agitator bolt and lift the old agitator off of the drive shaftMoreUse a 7/16 inch socket to remove the agitator bolt and lift the old agitator off of the drive shaft install the new agitator by aligning it on the drive shaft then secure it with the bolt.
How do you take off an agitator cap?
Insert a flathead screwdriver along the edge of the agitator cap and the agitator. Twist the screwdriver to pop the cap from the top of the agitator. Reach inside the agitator to grab the plastic dust cap with your fingers and lift it from the agitator.
How do you clean the agitator in a washing machine?
Remove the fabric softener dispenser from the agitator. Allow the washer to fill and proceed to the wash phase. Allow the washer to agitate for about 5 minutes. Lift the lid and use a long, slender soft brush to clean the inside of the agitator.
How do you clean an agitator?
Regularly cleaning the tub will keep the agitator clean. If you see any product or soil build-up, wipe it down with a cleaning wipe or rag with mild soap and water. If your agitator has a removable cap, also wipe down the inside until you've removed all soils.
Can you remove the agitator from the washing machine?
With the bolt sufficiently loosened, you can pull the agitator straight up to remove. Alternatively, on some models where the agitator has an upper and lower section, you may need to use a square drive bit to unthread a retainer that will allow you to pull the upper portion of the agitator off first.
How do you loosen the agitator bolt?
1:134:08How To: Whirlpool/KitchenAid/Maytag Agitator Bolt WPW10076270YouTubeStart of suggested clipEnd of suggested clipOnce you have the socket on the agitator you'll notice that it spins the whole tub. So you're gonnaMoreOnce you have the socket on the agitator you'll notice that it spins the whole tub. So you're gonna have to reach down and hold it while you break the bolt. Free.
How do you remove clothes from under agitator?
1:423:49Clothes Stuck in the Wash? Here's How to Get Them Out! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt up so I guess it can face so what I did. So I got this rope. This is already done so I'm doing itMoreIt up so I guess it can face so what I did. So I got this rope. This is already done so I'm doing it easier than it was. But you got to slide it underneath.
What is the cap on the agitator for in a washing machine?
Whirlpool and most technicians call it a “dust cap,” which is misleading because its basic purpose is excluding liquids and AIR, not “dust.” When seated properly and working properly, it forms a watertight, airtight “bulkhead” that 1) traps an air pocket inside the agitator column, thus preventing wash water from ...
What is an agitator cap?
Agitator inner cap and seal. Helps keep water, fabric softener from going thru the agitator. Fabric softner dispenses from the holes in the agitator, just above the cap.
Why does my agitator have a lid?
The cover on the agitator that comes with this unit is just a cap where it can be removed to place a sold seperately softener dispenser.
How do I clean my washing machine agitator without removing the agitator?
Turn off water, add in baking soda and vinegar. Dip cleaning cloth in water/baking soda/vinegar mixture, and clean all around the inside and top of the washer. Use Q-tips, a pipe cleaner, or toothbrush to reach the nooks and crannies and remove all the built up gunk. Rinse and scrub the inside of the agitator.
How do I remove the agitator cap from my LG washer?
1:134:38How to Remove a Wash Plate that is Stuck on a Washing Machine - LG ...YouTubeStart of suggested clipEnd of suggested clipThere is a small opening for the cap that you will have to feel around for with your hands. But onceMoreThere is a small opening for the cap that you will have to feel around for with your hands. But once you find that you can insert the small screwdriver.
How do you get a stuck agitator out of a washing machine?
ANSWER: To remove a tightly-fitted agitator or one that has become firmly glued in place by soap residue, first unplug the washer and remove the agitator cap. Then, if there is room between the bottom edge of the agitator and the tub bottom, work a completely deflated bicycle tire in underneath the agitator.
How do I fix my agitator?
0:296:51How to Fix Washer Top Agitator Not Working - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes this comes off by hand other times you may need to actually use the ratchet. Hold theMoreSometimes this comes off by hand other times you may need to actually use the ratchet. Hold the agitator down bottom in place he needs.
How to Remove the Top Cover of a Washing Machine | Hunker
While details may vary according to the make and model of your washing machine, most brands make removing the top cover of a washing machine a relatively straightforward process. Make certain that you keep all screws together and in a safe place, as this will make reassembly easier when the time comes.
3. Burnt Motor
The drive motor is a key component in your washing machine; without it, the drum will not be able to spin at all. The steps below show you how to replace this part…
5. Faulty Air Pressure Tube
Your washing machine will not agitate or spin unless it has filled with water. If your machine doesn’t spin even when the drum is full, it indicates an issue with the air pressure tube. Here are the steps you’ll need to take to replace this part…
Still need help? Contact us or schedule service
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.
How long does it take to open a Whirlpool washing machine?
On a Whirlpool unit, the clips are located near the back and require you to lift the lid from the back toward the front. You can open the top of the washing machine in less than 15 minutes to access the interior workings of the appliance.
Where to find end caps on washing machine?
Locate the end caps of the washing machine on the back instrument panel, and pull the caps off by hand, being careful not to break the plastic clips.
How to get the most out of every wash cycle?
To get the most out of every wash cycle, sort your fabrics by recommended water temperature, cycle setting and colors. Empty pockets of loose change, buttons and other items that can become loose during the cycle. If you have stubborn stains, pretreat them according to the manufacturer’s instructions.
Can you schedule a cycle on a Whirlpool smart top load washer?
You can schedule cycles, select settings and track cycle progress on your smart top load washer all from your phone when you use the Whirlpool ® App. 1
Do you have to add fabric softener to a top load washer?
If your machine has a fabric softener dispenser, add a measured amount of the product and dilute it with warm water to fill the dispenser to the “Max Fill” line. If your top load washer does not have a fabric softener dispenser, you will have to add the fabric softener manually.
Do you need to pre-treat a Whirlpool top load washer?
Some tough stains need to be pretreated, which is why select Whirlpool ® Top Load Washers offer a Pretreat Station. The Pretreat Station allows you to soak and scrub your stains right in the washer with a built-in faucet and pretreat brush to clean the stain before it sets.
What is the agitator in a washer?
The agitator is what creates the thrusting motion in your washer to tumble your clothes during the washer cycle. Your agitator will rotate one way, and not the other. The agitator dogs are what prevent the agitator from rotating in both directions, while allowing it to rotate in one direction.
What happens if your agitator is not working?
If your agitator is no longer agitating properly, your clothes will not tumble, and will not be washed properly. The agitator repair kit includes an agitator cam, 4 directional cogs, a bearing, thrust spacer, inner cap seal, and a washer. It is constructed of plastic and rubber, and comes in black/white. See more...
How many bolts does a washer agitator have?
One bolt held the entire agitator unit in the washer, as well as held the upper and lower halves together. Once that nut was removed the two halves seperated and the plastic clutch pieces could easily be replaced wtih the new onces in the repair kit.
What is an agitator repair kit?
This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.
How to remove plastic cup from agitator?
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Does the agitator come with a cap?
This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.
How do I know if my agitator is broken?
If your Whirlpool washing machine is not agitating, then it is important to determine whether or not the agitator is the root cause of the problem. There are a few ways that you can do this.
Potential causes for damaged agitator
There are a few potential causes for a damaged agitator in a washing machine. Some of the most common reasons include transmission failure, timer failure, defective switch on the lid, or drive motor has gone bad.
How to Inspect the Whirlpool Agitator?
If the machine is not agitating but spinning and draining, there is a high probability that the agitator is damaged. This can be confirmed by inspecting it from underneath, top, or from inside the washer.
Conclusion
Inspecting the whirlpool agitator is one of the first steps in troubleshooting a broken washer. By trying to spin it by hand, you can check if the agitator is working or not. If it moves with a lot of, chances are either your drive motor has gone bad OR fitting needs to be checked.
Frequently Asked Questions
While we have tried to cover the basic troubleshooting along with common symptoms and causes, there are a few questions that are asked frequently.
How long does it take to open a Whirlpool washing machine?
On a Whirlpool unit, the clips are located near the back and require you to lift the lid from the back toward the front. You can open the top of the washing machine in less than 15 minutes to access the interior workings of the appliance.
Where to find end caps on washing machine?
Locate the end caps of the washing machine on the back instrument panel, and pull the caps off by hand, being careful not to break the plastic clips.
