how do you paint a dark wooden bed white

How to Paint Dark Wood Furniture White

1. Sand the dark wood furniture with fine-grit sandpaper. You are just roughing up the finish of the furniture, not sanding it down to the bare wood.
2. Vacuum the furniture to remove the sanding dust. Wipe the furniture down with a damp cloth to remove any leftover dust.
3. Place the piece of furniture on a drop cloth in a well ventilated area. ...

More items...

Full Answer

How do you paint dark wood furniture white?

The paint should be given plenty of time to dry between coats. A primer is also a necessity for painting dark furniture white. The primer can hide stains and reduce the number of paint coats homeowners need to apply to the furniture. Sand the dark wood furniture with fine-grit sandpaper.

How do you paint a wooden bed frame?

Start painting at the top of the bed and work down to the bottom. Apply a second light coat of paint and allow it to dry. Apply a coat or two of clear polyurethane to the bed, if desired. Polyurethane helps protect and preserve the paint, and is particularly useful for beds in children’s rooms.

How long does it take to paint furniture white?

Painting furniture is not difficult, but can take several days to do properly. The paint should be given plenty of time to dry between coats. A primer is also a necessity for painting dark furniture white.

How do you paint over sanded wood furniture?

Vacuum the furniture to remove the sanding dust. Wipe the furniture down with a damp cloth to remove any leftover dust. Place the piece of furniture on a drop cloth in a well ventilated area. Apply paint primer to the piece with a paintbrush and a foam paint roller. Use the paintbrush to reach into the corners.

Can dark wood furniture be painted white?

Some homeowners with dark wood furniture are choosing to paint it white to update its look and increase its longevity. Painting furniture is not difficult, but can take several days to do properly. The paint should be given plenty of time to dry between coats.

Can I paint over dark wood furniture?

Adding two coats of shellac primer, three coats of paint then sealing the paint with satin wax ensures a good quality, long lasting finish. Properly prepping furniture and applying a good quality shellac primer are key when painting over dark stained wood.

Can wooden furniture be painted white?

And yet, unfortunately, painting wood furniture white and keeping it “pure and clean” looking is not the most simple task. But don't worry, it's still doable. I'll be teaching you how I keep that “clean white” look today as we walk through the steps I recently took for my latest commissioned furniture piece.

How do you paint a wooden bed frame white?

Painting a wooden frame with sandingClean the frame with some soap and water.Remove any dirt or loose paint.Lightly sand the frame with 150 grit sandpaper, or if the frame is already varnished, an 80 grit sandpaper. ... Add the primer/undercoat and allow it to dry.Start painting once the primer/undercoat is dry.More items...•

How do you change dark wood to white?

Paint over wood stain in 6 easy steps:Step 1: Start by sanding the wood. “Can you paint over stain without sanding?” is a common question. ... Step 2: Wipe down the wood. ... Step 3: Add a coat of primer. ... Step 4: Wipe the wood with a cloth. ... Step 5: Paint your wood. ... Step 6: Apply the finish.

Can I paint dark stained wood white?

Apply a quality white or light gray primer according to the manufacturer's directions, and let it dry completely. Use a primer that is compatible with the underlying stain formulation, and follow that with a topcoat paint that is compatible with the primer.

How do you paint wood furniture white without sanding?

5 Methods for Painting Furniture Without Sanding:MINERAL PAINT (My Favorite Option) With Mineral paint you don't need to prime anything beforehand. ... CHALK PAINT. Chalk paint is the best way to paint practically anything without sanding. ... MILK PAINT + BONDING AGENT. ... BONDING PRIMER. ... LIQUID DEGLOSSER.

What is the best paint to use on wood furniture?

Chalk paint is the most common choice of paint for wooden furniture and gets its name from the luxurious chalky finish it creates. 'It's a multi-purpose paint that applies to just about any surface, without the need for priming or sanding,' says Annie Sloan, founder of Annie Sloan Paints (opens in new tab).

How do you make wooden furniture white?

0:197:11How to Paint Furniture White - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm Jenny with roots and wings furniture. And today we are going to paint. This. Table white now ifMoreI'm Jenny with roots and wings furniture. And today we are going to paint. This. Table white now if you have refinished anything or have been painting furniture for any amount of time you will know

Can you paint a wooden bed white?

You'll never go wrong with a white or light grey finish. A neutral approach to your wooden bed frame can create a lovely contrast if you have bright walls or vibrant wallpaper.

Is it better to spray paint or brush furniture?

Spray painting is faster than brush painting. Most spray paint is oil-based and provides a more durable finish than latex paint. Spray paint can be used on practically any surface, including wood, metal, wicker, plastic and resin. Spray paint dries much more quickly than brushed-on paint.

Can you paint over varnished wood without sanding?

Can you paint over varnished wood without sanding? Yes. You certainly can.

Can you paint over stained wood without sanding?

Yes, you can paint over these stained wood items without standing or stripping: Furniture. Cabinets. Paneling.

How do you make dark wood furniture look modern?

Embrace dark wood furniture with deep colors. Instead of trying to balance a deep stain with light, airy colors, embrace a moody palette of saturated paint colors. In a bedroom, try setting off dark cherry wood furniture with charcoal gray walls to create a cozy, cocoon-like space.

How do you paint dark wood to light wood?

With the help of a few simple tools, you can do it on your own.Step 1: Gather the essential equipment. ... Step 2: Remove the topcoat. ... Step 2: Sand a layer of the wood. ... Step 3: Lighten the wood with wood bleach. ... Step 4: Dry the wood completely. ... Step 5: Sand the wood to make it smooth. ... Step 6: Apply wood color, if necessary.More items...

How do you upcycle dark wood furniture?

0:376:12Bleak to chic: Unique ways to revamp your furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne of my favorite tricks for dealing with detailed wood is a popsicle stick and pieces of sandpaperMoreOne of my favorite tricks for dealing with detailed wood is a popsicle stick and pieces of sandpaper. I wrap the popsicle stick and then I'm able to get into the nooks and crannies of the furniture.

How long does it take to paint furniture?

Painting furniture is not difficult, but can take several days to do properly. The paint should be given plenty of time to dry between coats. A primer is also a necessity for painting dark furniture white. The primer can hide stains and reduce the number of paint coats homeowners need to apply to the furniture. Advertisement.

How to remove sanding dust from furniture?

Vacuum the furniture to remove the sanding dust. Wipe the furniture down with a damp cloth to remove any leftover dust.

What color furniture looks good in a room?

White painted furniture can look good in any room of your home.

How to get paint to stick to a bed?

Lightly sand the surface of the bed using a 220-grit sandpaper. Roughing up the surface in this way will help the new paint stick. If the bed has a chipped or flaking paint finish, use a heavier 100-grit sandpaper to smooth the rough edges, then finish with lighter sandpaper.

How to protect a bed from paint?

Apply a coat or two of clear polyurethane to the bed, if desired. Polyurethane helps protect and preserve the paint, and is particularly useful for beds in children’s rooms.

How to smooth out a chipped bed?

If the bed has a chipped or flaking paint finish, use a heavier 100-grit sandpaper to smooth the rough edges, then finish with lighter sandpaper. W ipe off all traces of dust and grit with a clean, damp cloth.

How long does it take for enamel paint to dry?

Apply a light coat of latex enamel paint, using a medium and/or a small paint brush. Allow the paint to dry for at least two hours, or as directed on the paint can. Start painting at the top of the bed and work down to the bottom. Apply a second light coat of paint and allow it to dry.

How to clean a wood bed with vegetable oil?

Fill a bucket with warm water and add a small amount of vegetable oil-based cleaner intended for use on wood. Dip a sponge or rag in the water and clean all surfaces of the bed. Allow the wood to dry.

Can you paint a bed frame that won't show?

Keep in mind that the inside surfaces of the bed frame will be out of sight once covered with a box spring and mattress. You might wish to apply only one coat of paint to the parts of the bed that won’t show.

Can you paint a wooden bed?

You can paint or repaint a wooden bed with any color you wish. Fresh paint on the bed frame, perhaps combined with a new comforter and pillow shams, can transform a bedroom. Don’t skip over the prepping and priming steps -- they are essential to achieving the best painting results.

How long does it take to sand a twin bed?

It’s back-breaking work. These two twin beds (headboards, footboard, and side rails) took about 3-4 hours to sand. Remove most of sanding dust with a leaf blower. Then wipe the furniture down with a damp cloth to remove the remaining dust. Once I’ve exfoliated the wood, I clean it with a degreasing solution like TSP.

How long do antique beds last?

The problem, however, is how do you clean, prep and paint those antique beds white so they’ll last another 60 years. Here’s how…. This pair of twin beds belongs to a friend of mine. She purchased them from CraigsList for her daughter’s bedroom. The beds are believed to be more than 60 years old ...

What type of primer is used for a paint job?

There are three different types of primer. The regular water-based and oil-based primers which use only when I need to ensure extra adhesion of a paint. And then there’s BIN shellac-based primer. BIN is the only type of primer that actually blocks bleed-through of old stains and oil-based topcoats.

Do you need to water milk paint?

It’s not necessary, but I do water milk paint down with just a small amount of water. This helps the paint spread a little easier, go on thinner, and reduce brush marks. Even with the BIN stain-blocking primer, these beds still required 3 coats of paint. Going from a darker stain to a white usually does.

What to spray on bed frame?

If you’re worried about bacteria, bed bugs, or other pests in the bed frame, spray it with a disinfectant spray and/or a safe indoor pesticide spray. If you do apply insect spray to the bed frame, wipe it down after it dries to remove any residue before sanding.

How to clean a bed frame?

If you received your bed frame used, it is even more important that you clean it for sanitary reasons. For best results, use a solution of water and vinegar to clean wooden furniture. It not only helps remove odors, but it’s also a natural way to combat bacteria.

How to remove sanding dust from a wood table?

Remove all sanding dust with a tack cloth , then sand again with the 220-grit sandpaper until the surface is smooth to the touch. Using a tack cloth , remove all sanding dust.

How to prevent sanding dust?

You want to allow all chemical fumes and sanding dust to easily escape the area. Wear a dust mask or other nose and mouth protection to prevent you from breathing in any sanding dust. When using stains or polyurethane finishes, follow the manufacturer's recommendations for breathing protection.

How long does it take for a bed frame to cure?

Reassemble the Bed Frame. Allow the final coats of paint or polyurethane to cure for as long as possible—at least 48 hours to ensure the best protection against abrasion. Bring the frame pieces back to the bedroom and reassemble the pieces. Any damaged or rusted hardware should be replaced rather than reused.

How to get rid of pests in bed frame?

If you’re worried about pests in the bed frame, spray it with a safe indoor insecticide. Look specifically for a spray that is EPA-approved and contains pyrethrins, pyrethroids, pyrroles, or neonicotinoids. Be sure to get the spray into any corners or cracks. Follow the instructions on the spray bottle for drying, then wipe the bed frame down to remove any residue before sanding.

What is the best way to clean wood furniture?

If you received your bed frame used, it is even more important that you clean it for sanitary reasons. For best results, use a solution of water and vinegar to clean wooden furniture.

What is the first step to painting furniture white?

First Step to Painting Furniture White. The first step when painting furniture white, or painting furniture any color for that matter is the prep. Prep is probably the most important step in furniture painting. This is my go-to process for How to Prep Painted Furniture. In addition to the standard prep process this cabinet is getting ...

How to make white paint look white?

First, I grab my clear sealer. Then squirt your clear sealer onto a plate and then I dab a little bit of my white furniture paint in with my clear sealer. Just enough to give the sealer a white tint. You don’t want to add a lot of the white paint, just a little.

Can you sand furniture with a lint free cloth?

After you give a quick sanding, always make sure to go back and remove the dust that you just created. A clean lint-free cloth to wipe away the dust works perfectly. You can find them online HERE. This applies to every time you sand your piece of furniture, both sanding between coats and distressing .

Is there a paint for furniture?

The truth is- I don’t think there is one best paint for painting furniture whether white or any other color. Of course, there is furniture paint and then there is wall paint. There is quality paint for furniture and lower quality paint. At the end of the day, most people find what they are comfortable with using and stick with it.

Is there less pigment in white furniture paint?

There is less pigment in white furniture paint making it sometimes seem as if it’s see through. Don’t get discouraged, with primer and two coats of paint your piece will start to look beautiful. This is with two coats of the custom mixed white furniture paint on the cabinet.

How to whitewash wood furniture?

You can use steel wool to reach corners. Wash the wood with vinegar and water to neutralize the stripper formula. This will also make the wood safer and will be able to hold the whitewash. Wait for the furniture to dry completely before continuing with the next steps.

How to whitewash wood?

You can use a ready-made “wood stain” or “whitewash pickling” or you can also make your own whitewash formula by mixing paint and water (2:1 ratio of latex paint and water). For both homemade and store-bought products, always stir the mixture thoroughly before using.

What to use after whitewashing?

After the whitewashing is completely dried, apply a clear water-based sealant. This will protect the whitewash job from the elements and will create a fresh new look even if the furniture piece for years. Most sealants are applied using a brush or a lint-free sponge. Always use a clear water-based sealant.

How to get yellow tinge out of wood?

Always use a clear water-based sealant . Oil-based sealants can make your furniture acquire a yellow tinge that is far from its original color. Apply the sealant in long even strokes over the wood. Let this dry completely for a day before using your furniture again.

How long does it take for a chemical stripper to work on wood?

Wait for the stripper to work. Cover the whole surface with a tarp and wait for 3–5 minutes while the stripper begins to dissolve the sealant. After the allotted time, the stain will start to bubble and will become loose.

Can you add layers to wood?

You may add additional layers if you want. But keep in mind that applying additional layers (and again wiping off the excess) will create a thicker layer that covers more of the wood grain. This layered process can make it easier to create the best combination of wood grain and color.

Can you whitewash dark wood?

Whitewashing dark furniture takes stages. You can’t just spread new paint over the wood! You must remove, strip the old varnish and paint and prepare wood first before you can move on to the actual whitewashing procedure.

What can I use to paint a bed frame?

When you paint a bed frame there are a few methods you can use. You can use a paint sprayer, a paintbrush, or a small roller. Because I was in my basement, I opted for the paintbrush.

How long does it take for a bed frame to dry after painting?

Be mindful of any potential drips if you are painting slats or spindles. Once the second coat was applied I let the bed frame dry for 24 hours.

What sheen should I use for a bedroom?

When you choose your paint color, I recommend a satin sheen. This sheen has a slight luster and is durable for the activity in a bedroom. I applied the first coat of satin paint, waited an hour, and then applied the second coat.

What happens if you paint a second coat of paint too early?

If you paint the second coat too early, you risk pulling up the first coat in some spots where it may still be tacky. The primer prevents any of the wood to bleed through the paint and provides a strong base for the satin paint.

How much does it cost to paint trim white?

For approximately $200-$600 in supply costs and a weekend’s worth of work, white paint will instantly transform the dark trim common throughout homes built in the ’70s and ’80s and brighten each room by reflecting natural and artificial light.

How many gallons of paint for 400 sq ft?

For example, if you have 500 square feet of trim to paint, you’d need 1.25 gallons (500/400) of paint for the first coat. For a second coat, which is often recommended with trim, ...

How to get rid of scuffs on paint?

Dust and dirt will pill in the paint, making it gritty, while dark scuffs will show through a single layer of white paint. Use the household sponge and water if you only have light dust and scuffs. Add a few tablespoons of laundry detergent to the water if you have tougher dirt marks to get rid of.

How to get black rubber off baseboard?

If you have a lot of black rubber scuffs on your baseboards, try using a Magic Eraser melamine sponge to remove them.

How much does a paintbrush cost?

Two angled sash paintbrushes; a 1-1/2-inch and a 2-1/2-inch – $1-2 each

Do you need to prep and sand trim before painting?

However, painting your trim requires a higher skill level than painting your walls, as you’ll need to prep and sand the trim before you apply the fresh color. To help you avoid mistakes while saving money on labor costs, we’ve put together this step-by-step guide for painting your trim white. Read on for a handy supplies list, color recommendations, and clear instructions for each part of the process.

Can a paint mixer pick colors?

Their employees are experts at mixing paint, however your paint mixer may not be an expert at choosing colors.

How to fix scratches on wood?

Address holes, scratches and other surface imperfections. A professional paint job requires fixing, rather than covering, those flaws. Patch holes in wood with wood putty. Sand out minor scratches. Fasten down loose boards or trim as needed. Lightly sand the entire surface with extra-fine sandpaper to provide a slightly rough surface that will hold the paint. Remove sanding dust with a tack cloth. Tape off areas you do not want to paint with painter's tape.

What is the best way to seal a wall?

Sealing a wall, floor or piece of furniture is helpful if the surface receives foot traffic or heavy use. A sealer adds a protective coating to the painted finish, and you apply it with a brush or roller as you would a coat of paint. If you used a latex-based paint with a flat finish over the original stained surface, you should follow with a clear polyurethane or compatible water-based sealer, since flat latex paint does not wash easily. If you used a gloss latex or oil-based paint, particularly a durable type such as floor or porch paint, a sealer may be unnecessary, since those are specially formulated to withstand heavy use. Check the compatibility of the sealer with the topcoat paint before applying, and follow the manufacturer's direction for use and drying times.

What is the purpose of sealing paint?

Sealing the Paint. Sealing a wall, floor or piece of furniture is helpful if the surface receives foot traffic or heavy use. A sealer adds a protective coating to the painted finish, and you apply it with a brush or roller as you would a coat of paint.

Can you paint over dark stained wood?

Color preferences and tastes in home decor vary from person to person, and styles change over the years. If you have dark wood where you would prefer a brighter, lighter environment, you don't have to grin and bear it merely because you've been told it is impossible to paint light over dark successfully.