Steps:
- 1. Lightly sand the object you want to distress. ...
- 2. Paint the entire piece in the base coat color you've selected.
- 3. For the bare-wood look: When the base coat is dry, start sanding off areas that would naturally end up distressed — places where hands would have held it, or corners that could easily get nicked. ...
Full Answer
How do I paint distressed wood furniture?
The first step is to determine what you'd like the finished piece to look like. If below the distressed areas you'd like to see an old paint color, as if the piece has been painted many times over, you'll need to paint two colors. Consider a brighter color for the base coat so it shows up well as it peeks through the top coat.
Can You distress white painted furniture with sandpaper?
Whether you are wanting to know how to distress white painted furniture or how to paint and distress furniture regardless of the color you choose, you can’t go wrong with basic sandpaper.
How do you distress a piece of furniture?
Lightly sand the object you want to distress. If the object already has a finish (previously painted or varnished), sand all surfaces well. After the sanding, wipe the piece with a tack cloth. 2. Paint the entire piece in the base coat color you've selected.
How can I make my furniture look like it was painted?
All you need is some paint, sandpaper, and a free afternoon to transform your furniture. Discover two ways to make over your furniture that will either allow the wood to peek through, or make it look like it's been painted over and over throughout the years.
How to get paint off of wood furniture?
How to make a distressed look with paint?
How to make antique furniture look antique?
How long does it take for paint to dry on furniture?
Is cleaning your home a chore?
Can you ruin furniture?
See 3 more
About this website
How do you paint rustic green?
0:393:49step-by-step rustic paint technique | Pottery Barn Hack - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for this I'm using miss mustard seeds milk paint this is luck it's green and I'm just putting aMoreSo for this I'm using miss mustard seeds milk paint this is luck it's green and I'm just putting a just a very tiny bit on my brush you can see the brush looks almost dry.
How do you paint furniture with distressed look?
How to Distress Furniture in 6 Easy StepsMaterials and Tools.Prepare Your Space. ... Sand and Clean the Piece. ... Paint the Piece. ... Apply Wax and Top Layer of Paint (Optional) ... Distress the Piece with Sandpaper and Steel Wool. ... Apply a Stain (Optional) ... Protect the Finished Piece with Polyurethane.
What kind of paint do you use for distressing furniture?
Chalk Paint Chalk paint is probably the most popular type of paint for distressing furniture. It's easy to apply, it dries quickly, and it distresses beautifully.
How do I get a distressed paint effect?
More videos on YouTubeStep 1) First Coat. Apply one coat of paint to your piece; let it dry completely. ... Step 2) Second Coat. If needed, apply a second coat in the same color to get the desired amount of coverage. ... Step 3) Distressing. Once your final paint coat is dry, you can start distressing it with fine-grit sandpaper.
How does vinegar distress furniture?
0:141:29How distress furniture using Vinegar - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo after you paint your piece and it's dried just spray it on. Take your rag I get a bag of these upMoreSo after you paint your piece and it's dried just spray it on. Take your rag I get a bag of these up a thirst up for a dollar. They're cut up old t-shirts. And then you just wipe it off.
How do you paint furniture to look shabby chic?
1:524:13How To Layer Paint To Create Shabby Chic Furniture | DIY TutorialYouTubeStart of suggested clipEnd of suggested clipOkay so now that our frame is dry I'm going to use a bit of bliss. To give it a final coat. AndMoreOkay so now that our frame is dry I'm going to use a bit of bliss. To give it a final coat. And after we've painted it we're going to let it dry for a bit and then we're going to wet this dress it.
How long should chalk paint dry before distressing?
Most recommend waiting 24 hours of dry time in between each one, although Annie Sloan says it will often harden well before that. According to the Annie Sloan Unfolded F.A.Q., a piece will take about 30 days to cure in its entirety, but you should be able to use it gently within 24 hours.
How do you paint something to look rustic?
2:195:54How To Paint Wood To Look Old and Weathered - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you just very lightly brush over it almost like a feather duster you just have a very light handMoreAnd you just very lightly brush over it almost like a feather duster you just have a very light hand here and as you can see it'll just barely lay down some white. You don't want it real thick.
How do you make chalk paint look distressed?
7:1510:10How To Distress Chalk Painted Furniture | Tips & TechniquesYouTubeStart of suggested clipEnd of suggested clipRub. It into the surface. And. Then take a lint-free cloth. And just wipe back the excess. And youMoreRub. It into the surface. And. Then take a lint-free cloth. And just wipe back the excess. And you can see that right away it's evened out that lighter halo the wax is now fully sealing the paint.
How do you make wood look distressed?
6:528:16How to Distress Wood - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if you tilt it up just slightly. I'm on exactly right here but if you tilt it up slightly. You'MoreBut if you tilt it up just slightly. I'm on exactly right here but if you tilt it up slightly. You're able to get that edge. And put a little bit of pressure if you put too much pressure.
How do you make a dresser look rustic?
0:172:18The Find & The Fix: How to Distress a Painted Dresser | HGTV - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have found that when painting a palm sander is really your best friend so everybody should have aMoreWe have found that when painting a palm sander is really your best friend so everybody should have a palm sander. It's an essential.
How do you make wood look old and rustic?
The trick to producing the look of weathered paint on new wood is to use two coats of different colored paints. Typically, the bottom coat is white or another light color—you can even use white paint primer. Then, a topcoat—often blue, red, or some other bold color—is added to the top and is partially removed.
How do you make wood look distressed?
6:528:16How to Distress Wood - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut if you tilt it up just slightly. I'm on exactly right here but if you tilt it up slightly. You'MoreBut if you tilt it up just slightly. I'm on exactly right here but if you tilt it up slightly. You're able to get that edge. And put a little bit of pressure if you put too much pressure.
How do you make white paint look distressed?
Use sandpaper and steel wool to distress the paint If you used just white paint or one color, use the steel wool and sandpaper to rough up the edges and corners and add signs of 'wear' and 'distress. ' Once you're happy with the look, dust away any chips with a rag before moving on to the next step.
How do you make wood look rustic?
The trick to producing the look of weathered paint on new wood is to use two coats of different colored paints. Typically, the bottom coat is white or another light color—you can even use white paint primer. Then, a topcoat—often blue, red, or some other bold color—is added to the top and is partially removed.
Can you paint over stain for a distressed look?
Paint two even coats of color For distressed furniture, primer helps the paint stick to the surface. It's a good idea to use separate primer and paint if you're doing a really nice, professional piece, but for something I want to look beaten up, this is faster and will do just as well.
How to Distress the Paint on Wooden Furniture | Martha Stewart
Nothing makes a piece of furniture appear more naturally distressed than surface imperfections and discolorations. Luckily, Henry says you can create a similar look on new furniture with the right tools. "Various sizes and textures of brushes, as well as rags and newspaper, can be handy for patina," she says.
What to do with antiquing glaze over white?
Since the glaze on this piece will be subtle, I am opting to seal with a clear matte sealer first, followed by the antiquing glaze. Squirt your glaze on a paper plate and apply with the yellow detailer sponge.
How much grit sandpaper do I need to sand furniture?
As mentioned in the video above, when I distress painted furniture I also like to sand the entire flat surface using 320 grit sandpaper to create a smooth finish.
Can you distress white furniture with sandpaper?
Whether you are wanting to know how to distress white painted furniture or how to paint and distress furniture regardless of the color you choose, you can’t go wrong with basic sandpaper.
Do you prime furniture before painting?
When painting furniture white distressed, I prefer to prime first to play it safe. You never know when a piece will bleed through and primer can help avoid that obstacle, like in this farmhouse white painted dresser. I always prime with a shellac based primer to seal the piece before painting, this is the primer that I use ( HERE ). And here are examples of other painted furniture projects where primer is used: PRIMER.
Do old wood drawers stick?
When dealing with old wood furniture, you may run into sticking drawers. Even though these drawers don’t stick I still make sure to rub down all the tracks with Daddy Van’s furniture polish to make sure that they glide smoothly.
Do you paint drawer fronts behind cabinet doors?
Make sure to paint the drawer fronts behind the cabinet doors for a clean fresh look.
Can you paint or replace hardware?
When it comes to hardware, you may choose to paint, replace or simply clean. We are keeping the original hardware, but like the dresser, the hardware needs a good cleaning. The hardware is all cleaned the same way that I always clean, prep and paint hardware, but without the paint step.
How to distress a piece of furniture?
1. Lightly sand the object you want to distress. If the object already has a finish (previously painted or varnished), sand all surfaces well. After the sanding, wipe the piece with a tack cloth.
What does distressed furniture mean?
In our grandmothers' day, if a piece of furniture or a picture frame was distressed, it meant it had been around for generations and most of the paint had worn off in areas that had been rubbed by hands or nicked by being moved too many times . Today, the distressed look is sought-after, and it can add character and style to many types of decor.
How to get bare wood look?
For the bare-wood look: When the base coat is dry, start sanding off areas that would naturally end up distressed — places where hands would have held it, or corners that could easily get nicked. For the color look: Rub candle wax on the areas where you'd like to see color show through.
Can distressing transform a chest into an heirloom?
Distressing can transform a new wooden chest into an instant heirloom.
Can you paint clear polyurethane over a finished project?
You also need to decide whether to add a stain to it afterward, which will mute or age the color (s) you've selected. To retain the integrity of your color choice, you may just want to paint clear polyurethane over the finished project. A water-based polyurethane that won't yellow over time is a good choice.
What to do if your paint comes out too distressed?
What if it comes out too heavily distressed? No worries! You can always choose to cover with another coat of paint (same color as your second coat) and start the distressing process again.
What is the best way to distress furniture?
The 3 most popular techniques to distress your beautiful piece of furniture are: Wet-Distressing. Dry-Distressing . The “Resist” Technique. You’ll probably find that one of these distressing techniques is going to become your go-to technique for most of your projects.
How to distress paint after it's dry?
Once your final paint coat is dry, you can start distressing it with either a wet rag or fine-grit sandpaper . Try using a combination of these methods, and use both a wet cloth and a sanding sponge to create the look you want. (See more about these techniques in the wet-distressing and dry-distressing sections above).
How to distress paint with fine grit sandpaper?
Once your final paint coat is dry, you can start distressing it with fine-grit sandpaper. You can start with 180 grit sandpaper to see how you like the look, but feel free to experiment with other grits. The higher the number, the finer the sandpaper. You just don’t want to use sandpaper that’s too coarse as it won’t look natural, and it’ll leave visible marks on the un-distressed parts of your piece.
What medium do you use to distress paint?
What you’ll do now is apply a “resist” medium in the places that you’d like the second paint layer to come off. Our medium of choice is our Beeswax Distressing Bar. You could also experiment with our Clear Wax, petroleum jelly, or candle wax.
How long does it take for a wet distressing paint to dry?
Apply one coat of paint to your piece; let it dry completely. We recommend letting the first coat dry for at least 24 hours when you are using the wet-distressing technique. Make sure that your first coat of paint is properly cured so that it won’t come off when you distress it.
How to paint a piece of wood?
Step 1) First Coat. Apply one coat of paint to your piece; let it dry completely. If you’re painting a piece made of raw or primed wood or MDF, then it’ll likely be ready for its second coat within an hour. If you are painting a previously painted surface, then it’s better to give the paint a good chance to cure.
How to keep distressed finish from looking heavy handed?
In order to keep your distressing from looking too heavy-handed, Henry says to not repeat the same motion or direction in too many places when applying your finish. "Keep in mind that some areas of a piece might be more naturally distressed than others," she says.
What tools do you use to dry distress wood?
"For a dry distressed look, you can use tools such as wire brushes, sandpaper, files, or even chains and hammers to mimic the appearance of years of rubbing and impact damage," she says.
Can you patina furniture?
Nothing makes a piece of furniture appear more naturally distressed than surface imperfections and discolorations. Luckily, Henry says you can create a similar look on new furniture with the right tools. "Various sizes and textures of brushes, as well as rags and newspaper, can be handy for patina," she says. "This would involve splattering, smearing, spilling, or wiping various pastes or liquids on the surface, and then rubbing them off. I often use diluted paint, either oil- or water-based, or tinted wax, which you can make yourself by mixing oil paint or dry pigments directly into paste wax."
How to get antique look on a piece of furniture?
If you want to give the piece an antiqued look, you can apply a stain to the piece. Apply one coat of the stain and then use a rag to wipe off the excess. Use a straight motion, rather than rubbing in a circle. Allow the stain to dry .
How to soften edges of polyurethane?
Sand the surface of the piece. If the furniture is unfinished, you can do a light sanding. Pieces that have been previously painted or treated with polyurethane will need a more thorough sanding. You can also soften any edges or corners that look too sharp. When you've finished sanding, wipe the piece down with a rag or tack cloth to remove any dust and dirt.
Can you use steel wool to paint waxed wood?
If you painted two coats, use the steel wool to go over the waxed areas and reveal the base color. You can use the sandpaper to add additional damage. For pieces with just one color, use the steel wool and sandpaper to remove the paint and show the bare wood beneath.
Does hemp oil seal paint?
You can see in this photo where I have brushed on the Hemp Oil, and how much of a difference It makes! It also seals your paint, so it’s a great last step for your painting process.
Can you leave milk paint alone?
I usually do very little prep when I’m using milk paint , because I like to let the paint chip and do it’s thing, and the best way to get some chippiness is usually to leave the piece alone .
Are you in need of a little green painted furniture inspiration?
Here’s a collection of 6 gorgeously done makeovers to help jump start your own creative juices!
How to get paint off of wood furniture?
Place your wood furniture piece on top of a drop cloth and lightly sand the wood to create a rough surface. Apply different levels of pressure as you sand; this causes the wood to absorb more paint in some areas. Wipe clean using a tack cloth or rag.
How to make a distressed look with paint?
Place a small amount of your lighter shade of paint in a container. Mix in water, 1 teaspoon at a time, until paint is thin like a wash but not so thin that it bubbles when you apply it. This will go over your first coat of paint to help with the layered distressed look.
How to make antique furniture look antique?
To create an even more antiqued look, lightly sand the edges and corners of the table with fine-grit sandpaper, concentrating on edges and areas of natural wear to keep it authentic looking. Wipe clean with a tack cloth to complete your painted distressed furniture.
How long does it take for paint to dry on furniture?
Spread the paint thin enough to allow cracks to show through. Allow the paint to dry for 24 hours.
Is cleaning your home a chore?
Cleaning your home doesn't have to be a daunting, time-consuming chore. The key to managing household duties quickly and efficiently is to design an easy-to-follow routine that includes all the most important tasks. Follow these step-by-step instructions for creating a customized whole-home cleaning schedule.
Can you ruin furniture?
It's easy to ruin a piece of furniture. Real wood furniture that isn't masse of Pine or Rubberwood is hard to find these days. Furthermore, if it's an old, antique piece you are totally ruining its worth. If you choose to ruin furniture by sanding not stripping first, and doing it unevenly you are ruining what was once a beautiful piece of wood. Please use your "distressing" technique on junk furniture. This makes me sick.
