Advanced ageing: how to create a faux patina
- Strip and prepare Begin by stripping off the chrome and other parts, such as door handles, lights, and wing mirrors. ...
- Masking Once you’re happy with the prep, wipe down the body with a wax and grease remover using a clean cloth. ...
- Laying down the plan ...
- Adding texture adds realism ...
- Time for coverage ...
- Rapid ageing ...
- Finishing touches ...
- Seal it up and enjoy ...
Full Answer
How to make gold with wax?
Can you use more Provence blue?
Can you paint a light fixture without taking it down?
How to make gold with wax?
Rub your finger into the paste wax until you have a small amount on your finger. Now rub your finger over all of the high points on your project or anywhere else you want the gold color . Continue applying it until you are satisfied with the look. You can add as little or as much as you like. You are done!
Can you use more Provence blue?
NOTE: Keep in mind, this is just a guideline. You can add more Provence blue color or less. You can also use more gold or less. Just decide as you go!
Can you paint a light fixture without taking it down?
If you missed that post, pop on over and see the tutorial I did in that post for changing the color of your light fixture with paint…and yep, without taking down the fixture. :)
What is copper patina?
Copper patina is a classic look, and it’s easier than you think to create a faux copper patina look on nearly anything you want! Easily paint anything with a faux copper patina technique for a classy look! Copper is my favorite metal. I love its shiny, happy color.
How to paint aquamarine?
First, clean and wipe off the item you want to paint. Next, completely paint your piece with copper metallic spray paint. Paint in several light coats for the best results and minimum dripping. Allow to dry 24 hours before moving on to the next step. Now brush on your aquamarine paint.
How to get aquamarine paint off?
Using your damp paper towel or rag, lightly wipe off the aquamarine paint in various spots while the paint is still wet. You’ll want to wipe in an up-and-down fashion rather than side-to-side for it to look the most realistic. Where you wipe it off depends on what look you’re going for.
Is copper patina authentic?
Copper oxidizes into a WIDE variety of patinas, so nearly any level of patina is authentic. It should be noted that not all copper patinas are blue-green — some are more of a brown-black. But I didn’t want that color, so I didn’t use it. Tips: You don’t have to just wipe the paint off. Try swirling and dabbing, too!
Can you paint anything with copper patina?
Easily paint anything with a faux copper patina technique for a classy look!
Can aquamarine paint be wiped off?
Generally speaking, the bits of copper more exposed will oxidize more, so you’ll want to wipe off more of the aquamarine paint in crevices and in areas where it would be a little less exposed to air. Wipe off as much or as little of the aquamarine paint as you wish.
How to make gold with wax?
Rub your finger into the paste wax until you have a small amount on your finger. Now rub your finger over all of the high points on your project or anywhere else you want the gold color . Continue applying it until you are satisfied with the look. You can add as little or as much as you like. You are done!
Can you use more Provence blue?
NOTE: Keep in mind, this is just a guideline. You can add more Provence blue color or less. You can also use more gold or less. Just decide as you go!
Can you paint a light fixture without taking it down?
If you missed that post, pop on over and see the tutorial I did in that post for changing the color of your light fixture with paint…and yep, without taking down the fixture. :)
