Interior Cedar Finishing
- 1. Acclimate New Cedar Acclimate new cedar to its surroundings by placing it in the room where it will be used a few days prior to treatment.
- 2. Lightly Sand Wood ...
- 3. Choose Finishing Product ...
- 4. Apply Finishing Product ...
- 5. Keep Up With Cleaning
What is cedar wall?
What is the difference between white cedar and red cedar?
How to roughen up wood?
How to make a wood floor look uneven?
Can you stain wood paneling?
Can you use interior latex paint on wood paneling?
Can you paint cedar wood?
See 4 more
About this website
How do you paint interior cedar paneling?
InstructionsClean the Molding and Paneling. Begin by making sure the paneling is clean. ... Fill and Sand the Wood. Apply wood putty with a putty knife to fill any holes or cracks and allow to dry. ... Caulk Around the Trim. ... Prime the Wood. ... Paint the Paneling. ... Paint the Trim.
What kind of paint do you use to paint cedar?
Exterior grade acrylic-latex paintExterior grade acrylic-latex paint is the most dependable finish in terms of protecting cedar.
How do you modernize a cedar wall?
Lovers of natural finishes may be inclined to simply sand the wood down until it's smooth and unstained. Once smooth, add a coat of shellac or polyurethane to seal it and enhance the grain. To give this a more modern touch, pair the natural wood plank with white or charcoal painted walls.
Does cedar need to be primed before painting?
Natural woods like cedar must be primed before they are painted, or the paint will have trouble adhering. Cedar is notorious for its tannins — the sap that seeps through the paint — and this seeping can lead to ugly stains that expose themselves, even through layers of paint.
Can you paint cedar walls?
Cedar wood panels can be painted or stained. HGTV provides some helpful directions to get you started. After sanding, make sure that the panels are free of dirt and dust. Wipe them down with a damp cloth to remove any residue and give them time to dry.
What is the best primer for cedar?
We like to use Sherwin Williams or Porter oil primers. Do Not – Use water borne primers over exposed cedar siding. Water borne primers cannot block the tannins in the cedar. What that means is that you can put primer on the cedar siding, but brown stains will come through.
What color paint goes with cedar wood?
Tans, Browns, and Reds Shades of brown and red bring out the natural beauty of cedar. These warm colors can be used together or mixed with lighter tans and yellows, while dashes of dark blue and green make attractive accents.
Can cedar be painted white?
Yes, Cedar can be painted white. But the high amount of tannin of Cedar can bleed through the paint which causes brown and yellow patches. Therefore, apply an oil-based acrylic exterior primer first and then apply the solid white paint. This will not only give the natural Cedar look but also prevent the bleed-through.
Is it better to paint or stain cedar?
Paint or stain? The best answer is based on your home's current cedar condition. Stain lasts longer and often looks more natural, but can only be applied if cedar is paint-free. Paint offers more protection and can be a good choice for badly worn homes with previous peeling issues from past painting applications.
Can I use Kilz on cedar?
Whatever you do stay away from the oil based primers such as Kilz and Coverstain, as they are not the best at sealing the massive tannin staining that cedar is well known for.
Will cedar bleed through paint?
Tannins exist in many woods, most notably cedar and redwood and can bleed through to the surface, leaving a yellowish-brown stain on the surface. These stains are more noticeable on lighter paint colors. Locate and correct any moisture sources. Remove all loose paint with a scraper or wire brush.
Can you stain cedar GREY?
Yes, you can stain Cedar grey. But after staining Cedar into a grey color, you cannot reverse the process and get the natural color back. You'll have to take down the applied wood stain using methyl alcohol.
How do you paint raw cedar?
Allow the washed surface to dry before recoating and apply primer paint to areas of bare wood. After the primer has dried, apply one or two topcoats of paint or solid-color stain. Two topcoats are always better over bare wood that has been primed. These may be applied to Western Red Cedar by brush, roller, or pad.
Is it better to paint or stain cedar?
Paint or stain? The best answer is based on your home's current cedar condition. Stain lasts longer and often looks more natural, but can only be applied if cedar is paint-free. Paint offers more protection and can be a good choice for badly worn homes with previous peeling issues from past painting applications.
Does cedar wood need to be painted?
Cedar siding's vulnerability to the elements is why you will want to make sure yours is properly prepared and painted with the highest quality paint available. A thorough primer coat and 100% acrylic-latex paint can help protect the siding from the sun and keep the wood underneath it in good condition as it ages.
How long should cedar dry before painting?
Normally fresh cut Cedar requires at least two weeks after installation to dry out completely, especially if this was stacked outside in yard and not covered. Letting Cedar wood cure is the best recommendation for new Cedar wood and siding, and before applying paints and sealers.
10 Things To Know Before Staining Your Cedar - Summerstyle
Cedar is by far our favourite siding material for countless reasons. Although we understand the need and convenience of maintenance free options, when it comes to siding, we simply can’t compete with nature.
Painting Interior Cedar Shake Wall
Hi Painters -- me again. The nice folks in the Decorating Forum helped me decide to keep a Cedar Shake wall in my Living Room.
Comments (18)
Inspiration Photo from a Home Decorator -- I love this look, however, these WHITE painted shakes still look "grainy". I need to know how many coats and what type of paint will cover the coarse grain of the Shakes.
How to make a wall look like a bookcase?
Line a wall with tall furniture , such as a large entertainment unit or a row of 6-foot bookcases lined up side-by-side. This takes the focus off the wood and puts attention on the furniture. Hang a large unframed canvas. Introduce a splash of color, but keep the canvas mostly white to help bounce light around the space.
How to avoid adding more wood to furniture?
Use furnishings with clean lines and a tailored look. Opt for lacquered tables or upholstered, minimalist seating to avoid adding more wood. If any part of your furniture is made of wood, paint it white.
What to use for a rustic table?
Use rustic, woodsy or natural furnishings, such as oak-framed chairs or a side table with wrought-iron legs. Add big, stuffed upholstered pieces to contribute to the warm, comfortable mood.
How to get squeaky clean wood?
The best wood in bad condition can make a poor showing. If refinishing the wood is not an option, scrub the walls with a rag and some wood soap to get them squeaky clean.
How to make a room look more light?
Get at least one fixture or lamp to provide task lighting to prevent eye strain when reading or sewing. Add softer accent lights in seating areas or to direct attention to artwork. Light candles in the evening to give the room a warm glow so the large expanse of wood doesn't seem dreary and dark.
Is cedar wood good for walls?
Art. Quality cedar wood adds to the value of the home. Wall-to-wall cedar can be a blessing or a curse, depending on your personal style. Love it or hate it, there's no reason it can't make the backdrop for a spectacular room. Your choice of furnishings, accessories and the way you arrange the room can draw attention to your walls ...
Can you bleach cedar walls?
If you don’t want to remove your cedar walls but wish you can change them a bit, bleach them to lighten them, or strip them to keep the look natural.
What is the best finish for cedar wood?
In the case of cedar closets, cedar oil is the best finish for indoor cedar. Rub cedar oil into the wood with a soft, clean rag. Allow the oil to soak in and the wood to dry. Do not put items back into the closet until the cedar is completely dry.
How to acclimate cedar to surroundings?
Acclimate new cedar to its surroundings by placing it in the room where it will be used a few days prior to treatment.
How to get cedar dust out of a closet?
Sand the cedar with fine-grit sandpaper to renew the scent. Sweep or vacuum the walls and the floor of the closet to remove the sanding dust when you're finished.
Why is cedar used in closets?
When used indoors, cedar is most often used to line closets due to its aromatic and insect repellent properties. However, the wood has many other uses, including furniture, wood paneling, accent beams and trim. Because cedar requires less protection when used indoors, there's a wide variety of treatments and finishes available.
How to protect wood finish from dullness?
To protect the finish, when it starts to look dull, clean it with a homemade wood cleaner consisting of 1 cup of water, 1/4 cup of vinegar, 1/2 cup of mineral oil and 20 drops of lemon oil, according to Mrs. Clean.
Can cedar be bleached?
Choose the desired finish and test it on a scrap piece of wood or inconspicuous area. Cedar can be bleached, stained, painted or waxed. If being used in a kitchen, bathroom or other damp area, use a finishing product rated for exterior use, perhaps even a cedar fence stain, for added moisture protection.
Is cedar wood treated indoors?
Because cedar requires less protection when used indoors, there's a wide variety of treatments and finishes available. The procedure for treating cedar is essentially the same, whether you're adding new cedar features to your home and finding the best finish for indoor cedar or refreshing existing wood.
How thick of a nap roller should I use for cedar?
Depending on how textured or rough the cedar I think you may need a thicker nap roller cover than 1/2"---maybe 3/4".
Do you need to sand caulk before sanding?
You don't need to do any sanding prior, just be sure to dust the surface well with a stiff bristle broom or brush, as rough surfaces are dust collectors. As to the caulk, you can scrape it, sand it, cut it with a knife, whatever, to get the overage off. If you need to do anymore caulking, do it after the primer.
Can you paint rough cedar?
Click to expand... Paint is not as suited to rough cedar as solid stain perhaps. In most cases you would need to prime to paint it. I've found rough cedar to be one of the best surfaces to hold most coatings. It sucks up a lot of material and gives it something to grip to. I've rarely seen 'peeling rough cedar.
How do I refinish a plank wall?
With some patience, they can be refinished without hiring a professional. Use an orbital sander to remove the existing finish, wipe away dust with a damp cloth, then use a stain pad on an extender pole to add the new finish. To go gray, you'll most likely have to have a semi-transparent stain custom mixed; you'll also want to lightly sand between coats to ensure that perfect finish. If you go too light, the gray can come out a little blue or green, depending on your wood tone. Stick with medium gray; many manufacturers label this "slate."
How do I break up wood plank walls?
You won't necessarily have to tear out any wood to do this. Use furring strips directly on top of the existing wood, screwed into the studs. Attach drywall directly into the studs, seam each sheet, add drywall mud, then sand. What you're left with is a sleek, modernized accent of wood plank. While homeowners with advanced DIY skills can do this, I'd definitely suggest a pro if there are electrical outlets, doors or windows involved.
Can you go gray with a light stain?
To go gray, you'll most likely have to have a semi-transparent stain custom mixed; you'll also want to lightly sand between coats to ensure that perfect finish. If you go too light, the gray can come out a little blue or green, depending on your wood tone. Stick with medium gray; many manufacturers label this "slate.".
Can you sand down wood planks?
Lovers of natural finishes may be inclined to simply sand the wood down until it's smooth and unstained. Once smooth, add a coat of shellac or polyurethane to seal it and enhance the grain. To give this a more modern touch, pair the natural wood plank with white or charcoal painted walls.
Can you paint planks off white?
If all-white is too clinical for you , sanding and painting planks off-white or an tique white is most likely more feasible. This lightens up the space and modernizes the overall aesthetic, plus it will allow cedar or oak trim to stand out.
What is cedar wall?
Cedar interior walls add rustic charm to a room and can have smooth, polished finishes or more textured looks. This Old House experts trace the history of wood paneling back to the Colonial era, when wood planks served double duty as interior and exterior walls, with planks used to divide rooms.
What is the difference between white cedar and red cedar?
Red cedar has reddish and pinkish hues, plus wide bands of brown, cream or amber. And, like white cedar, it also has a straight grain.
How to roughen up wood?
Use an orbital sander to roughen up the wood surfaces one panel at a time, sanding with the wood grain rather than against it. Do not move the sander in circles, as this will make it look uneven. Once you are done sanding, vacuum the area and use the brush attachment for the panels.
How to make a wood floor look uneven?
Remove any furniture and rugs, and place drops cloths if there is carpeting. Use an orbital sander to roughen up the wood surfaces one panel at a time, sanding with the wood grain rather than against it. Do not move the sander in circles, as this will make it look uneven.
Can you stain wood paneling?
If you don’t like the look of painted wood paneling though, you can use a stain instead. Varnish and polyurethane stains provide good protection and a glossy finish, but repairs needed later can be more difficult with these finishes. A thin stain, like Danish oil, is easy to apply and provides a more natural look.
Can you use interior latex paint on wood paneling?
The best method is to cut in the edges with a paintbrush and to roll on the rest with a 3/8-inch paint roller. If you don’t like the look of painted wood paneling though, you can use a stain instead.
Can you paint cedar wood?
Cedar wood panels can be painted or stained. HGTV provides some helpful directions to get you started. After sanding, make sure that the panels are free of dirt and dust. Wipe them down with a damp cloth to remove any residue and give them time to dry.
