how do you polish a marble fireplace

How to clean a marble floor?

How to remove stains from marble?

How long does it take to remove a stain from plastic?

What to use to remove water rings?

What is marble used for?

How to evenly distribute polish?

Why don't you seal cultured marble?

See 2 more

How do I restore the shine to my marble fireplace?

Apply a good quality marble polish with a soft cloth. Rub the polish into the surface to protect and revive its shine. A little buffing should bring out the full luster of your cleaned and restored marble mantel.

How do you polish marble fireplace surround?

Tips for cleaning a marble fireplace or surroundUse a soft microfibre cloth to remove surface dust and dirt.Use warm (not hot) water.Lightly rub the stain with the cloth, increasing in pressure if the stain is stubborn.Regularly rinse the cloth out to keep it clean.More items...•

How do you clean and polish old marble?

There are special marble cleaning solutions out there, but regular dish soap works well. You can mix a little soap into warm water in a spray bottle or simply put a few drops onto a wet cloth. Wipe the marble surface down with this sudsy cloth and follow immediately with a rinse and a dry.

How do you remove ring marks from a marble fireplace?

Once you've removed any staining, wet the surface with clean water and sprinkle on a marble polishing powder/paste (such as TeETCH by Tenax) Rub the powder/paste onto the stone with a buffing pad. Continue buffing until the mark disappears and the surface appears shiny again.

What is the best polish for marble?

To polish the natural marble surface, apply baking soda, 3 tablespoons mixed with 1 quart of water using a clean cloth then wait for 5 hours to dry. For cultured marble, use a compound made specifically for polishing cultured marble or a wax made for cars.

How do you revive dull marble?

The correct method is to use a soft dry cloth or mop to remove dirt and debris. Spray with a mild stone cleaner and wipe it off with a soft dry cloth. If you can't find a commercial stone cleaner, you can use a drop or two of mild dishwashing soap on a damp cloth and use it to wipe and clean the marble.

How do you make old marble look new again?

Wipe your marble with a soft dry rag to remove dust and crumbs, then wet the surface with a damp sponge. Next, apply a manufacturer-approved commercial marble cleaner or, alternatively, add a couple of drops of mild, nonabrasive dishwashing liquid to your damp rag to use as a cleaner.

What will ruin marble?

Marble is a very sensitive stone, much more so than granite. Food and drink such as coffee, wine, fruit juices, soda, and tomato sauce are very acidic and can etch or dull the surface of marble as well as result in stains. Cleaning products can also etch or stain the surface of marble.

Can you use toothpaste to polish marble?

This Instructable will explain how to repair some of the damage. But first, a public service announcement: NEVER USE TOOTHPASTE OR ANTI-PERSPIRANT TO POLISH YOUR COUNTERTOP, omigosh.

Can you polish out marks on marble?

Buff Out the Marble Surface There are buffing sets made to remove scratches from marble floors and surfaces, but you can do the DIY method using a soft, dry cloth. Rubbing in a gentle, circular motion with a bit of elbow grease, buff out the scratch until you can notice a shine come through your marble surface.

Can stains be buffed out of marble?

For water spots, light scratches, and nicks, try buffing your marble with dry #0000 steel wool.

Can you use Mr Sheen on marble?

Avoid the use of abrasive cleaners or scour pads. Glass and stainless steel cleaning cloths do a good job of leaving the granite smear free. A household spray polish, such as Pledge or Mr. Sheen can be applied to surfaces to clean and maintain the surface shine.

How do you make marble look glossy?

To polish the natural marble surface, apply baking soda, 3 tablespoons mixed with 1 quart of water using a clean cloth then wait for 5 hours to dry. For cultured marble, use a compound made specifically for polishing cultured marble or a wax made for cars.

Can scratches be polished out of marble?

All scratches on marble can be removed, from lighter scratches that just require some polish. Deeper scratches will require the use of abrasives to remove them. Removing scratches with abrasives can be done wet or dry. They can be removed manually or with an electric sander.

How to remove smoke burn marks from a marble fireplace?

There are some home remedies that you can do, like mixing ammonia and warm water together and let the solution lie on the burn marks for 5 minutes, then scrub the ammonia mix into the burn mark until the burn mark is removed. You can also make a paste from baking soda and water and let it sit on the burn mark for a few hours (3 minimum) and then wipe away with a clean damp cloth.

Can heat crack a marble fireplace?

If your marble fireplace starts to crack, this will not be due to the heat of the fire, but more likely due to the installations of the marble fireplace, or the surface around the fireplace is moving. Marble can certainly be fragile under some circumstances but there is no way it should be cracking due to heat exposure. Marble is specifically used for fireplaces because it is heat resistant.

How Does Smoke Impact Your Marble Surround?

When the fire dies down, particles of smoke that were not completely burned settle on surfaces and leave a film. These droplets include small pieces from wood tars in addition to remnants of fuel that didn’t burn during combustion.

How to get red wine stains out of marble?

The same applies for magic markers and their ink marks: make a paste of baking soda and water, apply the poultice on the stain (the poultice may need to stay there at least three hours), then wipe the poultice clean with damp cloth or sponge. This solution has been proven to be quite effective when removing these types of stains from marble surfaces – so give it a shot!

How to clean a marble surface?

All you need to do is wet a rag in warm soapy water to clean the surface, then dry buff the area with a microfibre cloth to ensure there is no water. If you have some fine wire wool you can also buff the area with this. You can then use some marble polish to buff the area. If any streaks are left behind just buff away with fine wire wool.

How to remove scratches from marble?

However, if it’s just a surface scratch you can usually remove them with some soap and warm water, and some polish.

What is marble used for?

The term marble is often used to refer to any hard, calcite rock that can be cut or polished. Marble is a type of rock that can be carved or polished to make interior design even more luxurious. Marble has been valued since antiquity for its sculptural qualities and usage in architectural structures like columns, flooring, ceilings and furniture.

How to remove etching from marble?

Wipe the etched areas with a water-dampened cloth, and sprinkle a small amount of marble polishing powder onto the etched spots. Gently buff the powder into the blemishes with your damp cloth according to the product’s instructions. Follow with a clean, damp rag to remove the powder residue, then wipe the marble dry to reveal its restored shine.

How to get rid of crumbly poultice on marble?

Carefully scrape the crumbly poultice away with a razor blade without gouging or digging at the marble surface. Clean away any remaining poultice residue with a damp cloth, and then wipe the marble dry.

How to clean marble?

Next, apply a manufacturer-approved commercial marble cleaner or, alternatively, add a couple of drops of mild, nonabrasive dishwashing liquid to your damp rag to use as a cleaner.

How long does it take to seal marble?

Spread the sealer across the entire marble countertop with a clean, dry cloth and let the sealer soak into the marble for the length of time specified on the product’s container (typically less than five minutes).

How to remove discoloration from marble counter?

While there are commercial marble stain removers—often called poultices—you can also make your own by slowly mixing one tablespoon of ammonia into a half-cup of hydrogen peroxide and slowly adding just enough baking soda to make a thick, creamy texture.

How long does it take for a poultice to dry?

Leave the poultice in place for 12 to 24 hours, after which you can remove the plastic wrap and leave to dry out completely.

What is marble in the modern home?

By Michelle Ullman. Photo: istockphoto.com. Marble—a white or uniquely variegated type of limestone that has been exposed to extreme heat and pressure—has a long history of being favored by artisans and builders, from Michelangelo’s David and Moses sculptures to The Taj Mahal. So it’s no wonder that marble in the modern home is both prized ...

How to remove stains from metal?

How to clean it. Stains from metal must be removed using a poultice – a liquid cleaner or chemical mixed with a white absorbent material to form a paste. This will draw out the stain over the course of 24-48 hours. You can buy poultice or you can make your own depending on what stains you’re trying to remove.

What to use to make marble look lighter?

As marble is usually light coloured, use bleach or hydrogen peroxide, but only use a little at a time to make sure it doesn’t strip the colour. For darker stones you’d use acetone or lacquer thinner. PICTURED: PUREGLOW KNIGHTON PERLA MICRO MARBLE FIRE SURROUND.

How to clean a sandbox?

How to clean it. Use diluted ammonia, bleach or hydrogen peroxide (½ cup in a gallon of water). DO NOT mix bleach and ammonia because it will create a lethal toxic gas!!!!

How to apply poultice to a stain?

How to apply poultice to stains. The consistency of your poultice should be roughly about that of peanut butter, and when you’re ready to apply it to the stain, follow these directions: Dampen the affected area with clean water (distilled if possible).

How long does it take for a marble poultice to dry?

Let the poultic dry and do it’s magic – this will take around 24-48 hours. After around 24 hours, take the plastic off. Remove the poultice, which will have drawn out the stain, and clean the marble with clean (again distilled if possible) water. Buff dry with a soft cloth.

How to get water marks off marble?

Lightly rub the stain with the cloth, increasing in pressure if the stain is stubborn. Regularly rinse the cloth out to keep it clean. Use distilled water where possible as any impurities in the water can stain the marble. Dry with a soft cloth or towel – do not let it air dry as this can cause water marks.

What materials are used in a poultice?

You’ll need to buy an absorbent base for your poultice which can contain materials such as talc, chalk, kaolin, and diatomaceous earth. Here’s how to make poultice for stains:

What is shiny polish?

The shiny polish seen on marble slabs, countertops, tile, and other stones is achieved by high friction on huge stone polishing machines at the factory long before it gets to a stone warehouse, showroom, or to your kitchen or bathroom countertop.

What is the shine on marble?

It's a common myth that the shine on marble countertops and floor tile is achieved by applying some type of chemical or "polish" to the surface. Not exactly. The "shine" on marble is not something that sits on top of the marble... it is part of the marble itself.

What is a dull water spot on marble?

Those dull "water spots" and "glass-rings" (etch marks) are baffling. And often people hold false assumptions and have incorrect ideas about how to polish marble or how marble polishing is actually performed to create a shiny surface finish. Many think that the shine or polish on marble comes from applying a potion, ...

What happens if you use acidic cleaner on marble?

It's like a chemical burn. If you use the wrong products for cleaning marble (too acidic or too alkaline) you can destroy the shiny finish over the entire surface making your whole marble countertop or floor "dull". Etching begins on contact and the longer the exposure the more severe the etching.

What is polished stone?

A "polished" finish is the shiny, high-gloss type of finish with the deepest color saturation commonly seen on marble and granite countertops.

What is a whitish spot on marble?

Marble (travertine, limestone and any "calcitic" stone too) is sensitive and reactive with certain types of foods, products and chemicals, which can damage the surface finish leaving dull and/or lighter-colored whitish spot often described as a "water spot", "water stain", "glass-ring", or "ghost stain".

What happens if you spill orange juice on marble?

So, if you spill acidic orange juice (or any of the many other acidic foods and drinks) on marble it will corrode the surface.

What paint should I use for a marble fireplace?

After doing some research on different brands, I decided the best fireplace paint for marble was Rustoleum’ s Chalked Paint. Unlike Annie Sloan’s paint, the Rustoleum paint has a protective topcoat to seal the painted marble. I thought having a protective topcoat would be extra important for the marble fireplace hearth.

What to do if you don't remove paint tape?

If you don’t remove the tape immediately, you may want to use a razor blade along the edge to make sure it doesn’t pull off any of the paint.

How many grits of sandpaper to rough up a surface?

It was really simple to rough up the surface with 100 grit sand paper.

Can rustoleum withstand heat?

It also can withstand the heat from a fireplace. I selected their Charcoal color because I knew a black fireplace surround would give a neutral palette that would work for any decor. Rustoleum has a nice variety of color options if you prefer something different.

Is chalk paint thicker than sealer?

The sealer isn’t nearly as thick as the chalked paint.

Can you chalk paint a fireplace?

If you have an outdated fireplace, I’m happy to report that chalk painting your marble or tile fireplace is an inexpensive and simple option to give it a face-lift!

Can you use chalk paint on marble?

One of the best parts of chalky paints is they adhere really well to just about any surface. Primer is never necessary! And while sanding is generally not required with chalky paints it will improve adhesion when painting marble. As you can see, the marble was polished to a high gloss.

How to clean a marble floor?

You will need a mild detergent, 3-4 soft cloths, a poultice for stain removal (optional), a polishing compound, a low-speed polisher with a felt wheel (optional), and a marble sealant. You can collect the items yourself or purchase a kit.

How to remove stains from marble?

Apply your poultice (optional). A poultice will remove stains that have settled into the porous surface of your marble. Polishing your marble will not remove the stains; instead, you will be sealing them in.

How long does it take to remove a stain from plastic?

Old stains may require more time. Determining the time needed to remove old stains is a trial-and-error process. After 24-48 hours, remove the plastic, pour a little water over the dry poultice, and wipe it away with a soft cloth. Thoroughly dry the area.

What to use to remove water rings?

Use an etch remover polishing compound if you have water rings.

What is marble used for?

Marble is a popular option for countertops, tabletops, flooring, and fireplace mantles. While it brings natural beauty to your home, it requires special care to prevent damage and stains, which occur easily due to marble’s porous surface. [1]

How to evenly distribute polish?

Work in small sections. Only work on one small section of 1-2 feet at a time to create an even finish and avoid having your polishing compound dry out or begin to clump up. Working in small sections also helps you evenly distribute the polish because you are able to add small amounts of polish as you go.

Why don't you seal cultured marble?

Don’t seal cultured marble because it’s stronger and doesn’t need a sealant. Some cultured marbles won’t take a sealant.