How do you program a Concord 4?
- Press 9, master code (default is 1234), 030.
- Now enter the 3-digit user number you wish to change.
- Press 5, for partition menu.
- Toggle on/off the partitions the user can access, 1-6.
- Press * to save and then 00, # to exit.
Full Answer
How do I program the 78 Concord 4?
Chapter 3: Programming 78 Concord 4 Installation Manual Onboard options menu The Onboard options menu includes input, output programming, and output text settings. Onboard options - inputs settings Smoke verify Shortcut: 1100 Default: Off This setting control the number of sensor group 26 (fire) zone trips needed to report a fire alarm.
Do I need a user manual for Concord 4?
When necessary, this manual refers you to other documentation with compatible peripherals. The Concord 4 User Manual (P/N 466-2183) contains user worksheets that you should fill out during the installation and programming of the system. For multiple-partition systems, we suggest a user manual for each partition.
How do I set up a schedule in Concord 4?
If you are programming schedules for your customer, be sure to record the settings in the Concord 4 User Manual. To set up a time schedule: 1. Press A or B until the display shows SET UP SCHEDULES. 2. Press # and the display shows SCHEDULE 00.
How do I enter a 4-digit code on the Concord 4 system?
For Concord 4 systems, press 030nnn0where nnnis the user 000 through 229. For Concord Express V4 systems, press 030nn0where nnis the user 00 through 15. 3. Enter the desired 4-digit code, then #.
How do I program a Concord 4?
To enter program mode on the Concord 4 panel: Press 8, 4321, 0, 0. The display shows SYSTEM PROGRAMMING. Once you have verified that you see SYSTEM PROGRAMMING you can exit programming by selecting the A button followed by # and this point you should be out of programming.
How do you change the code on a Concord 4?
0:201:53How To: Add / Change / Delete User Codes on Concord 4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you would like to change your master code scroll down in that same menu until it reads systemMoreIf you would like to change your master code scroll down in that same menu until it reads system master code press pound to select. Now just enter that four-digit code and press pound.
How do you clear the alarm memory on a Concord 4?
To begin this process, press the “asterisk” key. While the keypad begins displaying status updates, press the “disarm” button followed by your 4-digit alarm code. This will clear the system memory and prevent the system from displaying the same message again for 4-10 hours.
How do I reset my Concord?
Restore with hard reset or Recovery mode T-Mobile Concord1- First turn off your T-Mobile Concord completely. ... 2- Keep holding on volume down and power keys together for a few seconds. ... 3- When the T-Mobile logo is displayed, release the buttons.More items...
How do I turn off the trouble beep on my Concord 4?
When a trouble condition is detected, six rapid beeps will sound every minute until the problem is resolved. Press the * (STATUS) button or arm/disarm the system to silence the beeps. They will resume after four hours unless the problem has been corrected.
How do you program a GE alarm System?
0:351:57Changing the Master Code on a GE/Interlogix Home Security SystemYouTubeStart of suggested clipEnd of suggested clipPress nine followed by your current master. Code scroll down using the a/b buttons until you seeMorePress nine followed by your current master. Code scroll down using the a/b buttons until you see user codes in the display.
Where is the master code on Concord 4?
Concord - Lost Master CodePress 9 then enter the Installer Code 4321 to display SYSTEM MENU then TIME-DATE.Press 3, SHORTCUT 03 appears, press # for USER CODES, then # for REG CODES.Press A or B button until SYS MASTER displays, then press #Master Code displays.More items...
What does it mean when your alarm system keeps beeping?
Check your batteries. Most systems continuously beep to alert you that batteries need to be changed. This is true for both security panels and detectors. Go through your home, and test all batteries associated with your security system using a battery tester.
How do I make my house alarm stop beeping during a power outage?
Go to your main control box and disconnect the battery supply, which will stop all beeping and shut your alarm system down. Once power is restored, you can reconnect your battery and your alarm system should work as before.
How do I default my ge 4 Concord?
You could: Attempt to use the default codes – usual suspects here are 4321 (default), 1234, 1111, 4112, 6321 (that's one ADT was known to use), and 0602 (SCM monitoring used this as a default)
How do I reset my DVR to factory settings?
To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 - 5 seconds, continue holding the reset switch and plug the DVR's power supply back into the unit, you will hear a beep.
How do you put a Concord 4 alarm in test mode?
To test your Concord 4 zones/sensors:Place all sensors and zones in their non-alarm state.At an alphanumeric touchpad, enter the sensor test mode by pressing 8, installer code, 3. ... Trip each zone/sensor one at a time. ... Press the Status button when you think all zones/sensors are tested.More items...•