how do you program a kwikset smartcode deadbolt

How do you program a Kwikset SmartCode deadbolt? How do I program my SmartCode 913 lock? Open the door. Remove battery cover. Press the program button once. Enter new user code. Press lock button. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST.

Full Answer

How do I change the code on my Kwikset door lock?

Enter the 0000 programming code and then press the Kwikset button once. A single beep will indicate that the lock is ready to accept your new code. Press the program button if you don't have a Kwikset button. The program button is located on the inside of the door lock under the plastic dust cover.

How many smart codes can I add to a Kwikset deadbolt?

pgoulet(Bill204) May 8, 2013, 3:15pm #1 I have a kwikset smart code deadbolt with z-wave. It connected to smartThings with out a problem, I can use it with smart apps and manually unlock and lock the door with it. The instructions say that when you connect the lock to z-wave you can add up to 30 different codes to it.

Why won't my Kwikset SmartCode 916 lock button lock the door?

The Kwikset SmartCode 916 Lock button does not lock the door. No user codes are programmed: If there are no codes in the lock, the lock button will not lock the door. This is indicated by the keypad flashing red three times with three beeps. Program at least one user code and test the Lock button again.

How do I program my Kwikset keypad?

Press and release the program button using the Smartkey tool or a paper clip. You will hear two beeps. 3) Press 3. You will hear once short beep and the keypad will flash green. 4) Press Kwikset button. 5) Enter a programming code. It will be between 4-8 digits.

How do you program a Kwikset Smart Code lock?

How do I program my SmartCode 913 lock?Open the door.Remove battery cover.Press the program button once.Enter new user code.Press lock button.If programming is successful the keypad will flash green once, and you will hear one beep.

How do you reset a Kwikset SmartCode deadbolt?

How to restore default settings on my Signature Series or SmartCode Deadbolt? Perform a factory resetRemove battery pack.Press and HOLD the Program button while reinserting the battery pack. ... Press the Program button once more. ... Perform the door handing process again to teach the lock the orientation of the door.

How do you program a Kwikset push button deadbolt?

0:394:14Kwikset Smartcode 888 - How To Program The Keypad - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay there are two buttons on the front. And you want to press the program button which is the oneMoreOkay there are two buttons on the front. And you want to press the program button which is the one on the bottom.

How do you program a smart deadbolt?

0:595:39How To Change User Codes - Schlage Connect Smart DeadboltYouTubeStart of suggested clipEnd of suggested clipBegin programming by pressing the outside Schlage button at the top of the touch screen then enterMoreBegin programming by pressing the outside Schlage button at the top of the touch screen then enter your 6-digit.

How do you change the code on a keypad lock?

You just need to follow the 5 easy steps to change the code.Step 1: Make sure that the door is open and unlocked. ... Step2: Touch the Keypad & Enter Codes. ... Step3: Enter *+01+# ... Step4: Enter Old Master Code +# ... Step5: Enter New Master Code. ... Step6: Repeat to Enter New Master Code.

Where is the program button on Kwikset lock?

While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad.

How do you reset the code on a Kwikset Smartcode 913?

0:151:16Kwikset Smartcode 913-change code - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you're going to press this lock button and you're gonna put in your existing code. And then you'MoreAnd you're going to press this lock button and you're gonna put in your existing code. And then you're gonna press the lock button then you're gonna put in your new. Code.

How do I change the code on my Kwikset Smartcode 910?

Press and HOLD Program button until keypad flashes green (about 5 seconds). Enter new mastercode. Press Lock button once. Re-enter mastercode.

What is the master code for Kwikset?

0-0-0-0The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How do you change the 4 digit code on a Schlage keypad lock?

To change the default 4-digit code on a Schlage lock, follow these steps.Step 1: Find your programming code. ... Step 2: Enter your programming code. ... Step 3: Press the Schlage and number 1 button simultaneously. ... Step 4: Enter your new entry code. ... Step 5: Enter your 4-digit code again to confirm.

How do I factory reset my Kwikset?

2 Kwikset: Factory Reset Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps. The light ring will flash red, then spin amber. The lock has now been restored and is ready to be set up again.

How do I program my Kwikset Smartcode 917?

0:431:43Programming the Kwikset Smartcode 955/917 - YouTubeYouTubeStart of suggested clipEnd of suggested clipQuick set enter a programming code it must be between four and eight digits. Press quick-set re-MoreQuick set enter a programming code it must be between four and eight digits. Press quick-set re-enter the programming. Code. Press quick-set if you hear a long beep.

How do you reset a Kwikset door lock?

2 Kwikset: Factory Reset Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps. The light ring will flash red, then spin amber. The lock has now been restored and is ready to be set up again.

How do I change the code on my Kwikset Smartcode 913?

0:001:16Kwikset Smartcode 913-change code - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you're going to press this lock button and you're gonna put in your existing code. And then you'MoreAnd you're going to press this lock button and you're gonna put in your existing code. And then you're gonna press the lock button then you're gonna put in your new. Code.

What is the master code for Kwikset lock?

0-0-0-0The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

How to change code on Kwikset?

Enter your desired code and press the lock button on the front of the lock. If your unit does not have a lock button, enter your new code and press the Kwikset button. The lock will beep twice after you press the Kwikset button if it has successfully accepted the new code.

How long is a Kwikset smart code?

When choosing your Kwikset SmartCode, there are a few codes you really should avoid. Your code can be either four to eight digits long or four to 10 digits long depending on the model of your lock. When choosing a code, avoid something obvious, like your house number, which is often one of the first guesses would-be intruders will make. Avoid easily guessed codes, like 1313, as well.

Where is the program button on a Kwikset door lock?

Press the program button if you don't have a Kwikset button. The program button is located on the inside of the door lock under the plastic dust cover. You'll find it just above the thumb switch. You need not enter the 0000 code before pressing the program button.

How to test if a door code is accepted?

Test your new code by locking and unlocking the door several times while it is still open, making sure your new code works. Do not close and lock the door until you know the new unlock code has been accepted.

Can you have more than one lock code on Kwikset?

Some Kwikset locks allow you to add more than one unlock code. This allows you to use one for yourself and give another to your kids, the housekeeper, the dog walker, your parents, or whomever else you may want to grant access. This feature can be especially handy if you have a business and want different employees to have different unlock codes.

Can you change the lock code on a Kwikset deadbolt?

Kwikset electronic deadbolts are a pretty smart addition to your home or office. They keep you safe and secure, and if necessary , you can change the lock code much easier than running around your house physically changing all the locks. After installing your new deadbolt, it's important that you change the unlock code. All Kwikset SmartCode locks leave the factory with a default 0000 setting, so you'll want to change it right away.