How do you program a PetSafe collar?
- Remove the receiver collar from your pet.
- Remove the battery from the receiver collar.
- At the transmitter, move the boundary switch from the low to the high position.
- Slowly adjust the boundary control dial up to #8, down to #1 and then back to the #4 position.
How to set up a wireless dog fence?
fix or set the radius of your pets containment area which is mostly dependent on the model of the wireless dog fence you have. The radius of the containment area can be set between 90 to 250 feet Max. Moreover, the actual method for setting the radius is also dependent upon the modality of the containment area.
How to setup and program the PetSafe Automatic pet feeder?
- Up to 12 meals each day
- Meal times can be set to 15 minute increments
- Meal size can be set in 1/8 cup increments with a minimum of 1/8 cup to a maximum of 4 cups.
How to make a pet collar?
Dog Gone Problems is a weekly advice column ... and feel relaxed and comfortable having a collar put on. Just make sure to go at her pace and stop before she feels the need to say you are moving ...
How to pair Your Collar to your remote?
Pairing the Remote with Your Device
- From the app store on your smartphone, install and open the Garmin Canine app.
- From the app menu, select My Family.
- Select a dog to pair with the remote.
- Follow the instructions in the app to pair the remote with your device.
How do I sync my petsafe collar to base?
Put boundary switch on transmitter in the 'high' position. Turn the boundary control dial on the transmitter to position 4. Standing within 1.5 - 3 metres of the transmitter, re-insert the batteries into the receiver collar(s). Test the boundary by walking out into the safe zone until your receiver responds.
How do I sync my shock collar to my remote?
Press and hold the power button on the collar for five seconds. The light will turn solid green, then begin to flash and beep. Release the button. Press and hold the yellow button on your remote.
How do I reconnect my petsafe wireless collar?
0:001:02How To Adjust Range and Sync Collar PetSafe Wireless Pet Containment ...YouTubeStart of suggested clipEnd of suggested clipControl here and you're going to put it all the way down to number one now I know you can't see theMoreControl here and you're going to put it all the way down to number one now I know you can't see the numbers but there's numbers on side on the side so just scroll. It all the way to the bottom.
How do you pair a dog collar with a remote control?
0:000:47How to pair the receiver with remote? (DOG CARE TRAINING COLLAR)YouTubeStart of suggested clipEnd of suggested clipUntil the screen turns zero. Step 2 recharge the receiver lights turns red with press this buttonMoreUntil the screen turns zero. Step 2 recharge the receiver lights turns red with press this button for five seconds. Its vibrates beeps and the screen turns one channel one and it works.
Change stimulation level in two dog mode
Hold the red button for five seconds. Use the grey button to select the level for and press the red button to lock the level.
Program one dog mode
Note: The first collar will remain paired when switching back to 1 dog mode.
How to adjust a dog collar probe?
With your dog standing, center the probes on the neck. Adjust the strap until the collar is snug. Both probes must be touching skin for correction to be felt. Move the strap through the Slide Buckle, then pull through the Fasten Buckle. Move the strap up through the Fasten Buckle, then pull through the Slide Buckle.
How long does it take for a dog to stop barking after wearing a collar?
Refrain from having your dog wear the collar longer than 12 hours at a time to avoid irritation.
How to pair a dog collar?
The collar needs to be turned off before it can be paired. Confirm it is turned off by checking that the light indicator is not flashing. Press and hold the power button on the collar for five seconds. The light will turn solid green, then go out. Release the button when the light goes out.
How to pair a scuba diver collar?
Note: The light can be hard to see when holding the button on the collar. Press the button on an angle to see the upper half of the button while holding. Press and hold the upper left button on the remote to pair the collar. The collar will flash five times and then begin beeping to confirm it is paired. ...
How to distract your dog from the safe zone?
Here are some ideas for distractions: Have a family member cross from inside to outside the containment area. Throw a ball or treat outside the safe zone. Have a neighbor walk their pet outside the yard.
How to train a dog to be a containment dog?
Short, frequent sessions are better than fewer, longer sessions. If your pet shows signs of stress, slow down the training schedule, add additional days of training, or increase the amount of play time with your pet in his new containment area. Pulling on leash toward the house. Ears tucked. Tail down.
How to get a dog to beep in a sandbox?
Begin by walking your pet on a leash in the containment area. Calmly praise and talk to your pet and move toward the Boundary Flags. Keep the mood happy. With full control of your pet on a leash, walk to the flags. As your pet enters the containment area, the Receiver Collar will begin to beep.
What to do if your dog doesn't respond to the static correction?
If your pet does not respond to the static correction, confirm the Receiver Collar is fitting properly. If the Receiver Collar is fitted properly and your pet does not respond to the static correction, increase the level by 1. Watch for slight reactions at first such as ears up, head turned, looking at the ground.
How often should you remove a dog's boundary flag?
Once you feel secure that he understands his boundaries, begin removing every other Boundary Flag every 4 days until all the flags are gone. Save the flags in case you need to use them again in the future to train another pet or to help retrain your pet at a new home.
What to do if your dog doesn't move?
If your pet does not move toward the distraction, praise and offer a treat. If your pet does react to the distraction, take him back into the containment area. Treat and praise your pet anytime he comes back into the containment area with or without help. Repeat this process with other distractions.
How to train a dog to be a good dog trainer?
Don't increase the level by more than 1 at a time. Stop and go back to the previous level if your pet shows any signs of fear or distress. Finish each training session on a positive note with lots of praise and play. Even if you think your pet is responding well to the training, complete the entire training.
How to train a dog to stop barking?
Teach your dog obedience and stop misbehavior 1 Teach basic commands including Sit, Stay, and Come 2 Prevent dangerous or annoying behavior such as pulling, digging, and chewing 3 Train off-leash from up to 1,000 yards away 4 Choose from static, spray, vibration, ultrasonic, and tone 5 Train 2 dogs at the same time 6 Not recommended for barking problems
What does a remote trainer do for dogs?
Remote trainers help you reinforce the behaviors you want from your dog, such as coming when called. They also let you correct chasing, digging, and other unwanted behaviors. When you push a button on the handheld remote, your dog will receive a stimulation from his electronic collar.
