How do you use a come-along stump removal? Attach one end of a come-along to a stationary object within 25 feet — the usual length of come-along cables — of the root. One possibility is to wrap a chain around a tree and attach the come-along to the chain.
Full Answer
Can you pull a stump out with a truck?
The pulling device works best when it’s in a vertical position so as the truck moves forward and pulls the stump out a little bit the chain needs to be loosened from the notch, the device stood back up vertically and the chain re-positioned. As you can see in the video we pulled and re-set the device multiple times while pulling this stump out.
How to rot a stump for easy removal?
Steps to Rotting a Tree Stump From A Leading Arborist
- Begin on a dry day or after a number of dry days if possible. ...
- If you are capable, use a chainsaw to cut the remaining part of the tree as close to the ground as possible. ...
- Once the tree stump is as close to the ground as you can comfortably get it to go, drill a number of holes into the top of the stump and ...
How to kill a tree stump?
Home Remedies for Tree Stump Removal
- Epsom Salt. This is a common DIY method for killing tree trunks, as it accelerates the decomposition process to 6–12 months, as opposed to three to seven years for natural ...
- Rock Salt. Similar to Epsom salt, rock salt can help kill and decay a stump with minimal effort. Drill holes into the stump.
- Plastic Bag or Tarp. Perhaps the easiest method to kill a tree stump is forcing darkness on it. Without sunlight, the tree stump will die, accelerating the decomposition process.
- Boiling Water. You don’t need to purchase any substance or solution to try this remedy—all you need is hot water. Expose as much of the stump’s root structure as possible.
How to remove a tree stump without a grinder?
- Pulling the stump over and out by mechanical force
- Burning the stump and major roots
- Biological breakdown of the stump and roots
- Digging out by hand
Can you pull a stump with a come along?
A come-along can help remove medium-sized tree trunks. While the stumps of small trees are relatively easy to remove my hand, and expensive grinding is required to remove the stumps of larger trees, medium-size trees may be too large to remove by hand and too small to grind. A come-along can help in this situation.
Can you pull a stump with a winch?
2:013:34Uproot a tree stump using a winch - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition it halfway down the stump attach the loops to the hook on the tension cable deep clutchMorePosition it halfway down the stump attach the loops to the hook on the tension cable deep clutch then insert the cable in the winch. Pull on the winch. Until you achieve the desired tension.
How do you release a come along?
2:504:07Releasing Tension on a Harbor Freight Come-Along | Quick TipYouTubeStart of suggested clipEnd of suggested clipThe handle back to release to stop Paul again. But this time grab. The stop Paul trigger with yourMoreThe handle back to release to stop Paul again. But this time grab. The stop Paul trigger with your thumb. And don't let it go back down the ratchet wheel will now spin freely.
How do you use a come along tool?
1:505:56How to Use a Come Along - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou take the operating handle and move it up towards the upper extremity of its range of motion.MoreYou take the operating handle and move it up towards the upper extremity of its range of motion.
How do you attach a winch to a tree?
Unspool your winch line until it is to the tree (turn the winch clutch to unspool, put on your gloves and pull that line). Wrap your tree strap around the selected tree (the bigger the tree, the better, but a 5”-6” diameter tree will work fine). Attach the D-ring shackle to the adjoining ends of the tree strap.
What is a come-along winch?
A come-a-long (comealong, come-along, power puller) is a hand-operated winch with a ratchet used to pull objects. The drum is wrapped with wire rope. A similar tool that uses a nylon strap is used to straighten trees, as it straightens gradually over time, therefore not splitting the trunk.
How much can you pull with a come along?
This enables you to move heavy loads without any pressure. The working capacity of a come along winch is about 4000 lbs. This is the maximum load and lifting capacity. However, the safe lifting capacity is 2000 lbs.
How do you use a cable puller?
0:372:36How to Use Cable Pullers and Come Alongs - Tyler Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the fall engaging the drum gears. Begin working the handle. Until the load has reached theMoreWith the fall engaging the drum gears. Begin working the handle. Until the load has reached the desired point for your application to lower or release the load in the controlled manner.
How does a chain come along work?
Come-a-longs operate with a ratchet and pawl that rotates a gear to pull the chain along a straight path. While slow-moving, come-a-longs provide greater precision in load movement than can be achieved with a traditional hand chain hoist.
What is the difference between a winch and a come along?
A winch is used for the winding or adjusting tension of ropes and cable and operates mechanically. A come-along is a hand-operated winch with a ratchet that pulls heavyweights using a ratcheting gear pulley system. To understand the differences between a winch and a come-along.
How do you use a hand winch?
1:213:42How to Operate a Hand Cable Winch - Tyler Tool Manual ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide rotate and lock the handle onto the lever nearest to the load pin and ratchet the leverMoreSlide rotate and lock the handle onto the lever nearest to the load pin and ratchet the lever forward and backwards to release the load in a controlled manner repeat.
How do you use a come along to tighten a fence?
0:013:21Using a Come-Along to pull barbed wire fence. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I basically just take this in any any any excess out of it with with a hammer wrap it two timesMoreSo I basically just take this in any any any excess out of it with with a hammer wrap it two times around staple it wrap around the rest up here or down here. And then I release to come along.
Can a winch pull a tree?
You can use a winch to pull down a dead tree, and you can also use a winch to help direct the fall of a tree as you cut it down. Winches can also be used to extract a half-fallen tree from the branches of surrounding trees. The size of winch you use will depend on the size of the trees you are dealing with.
How do you pull out a tree?
0:496:07How to Remove a Small Tree or Bush with a Truck - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to get our chain where wrap it around tightly on the bottom you don't want to get tooMoreWe're going to get our chain where wrap it around tightly on the bottom you don't want to get too high because then it's a slice you know like that and we're just going to pull them out alright.
What do you do with tree stumps?
Get rid of the tree roots For a completely labor-free removal, some manufacturers of tree stump removal chemicals suggest burning out what's left of the stump by pouring kerosene or fuel oil (never gasoline) into the holes. Wait until the liquid completely penetrates the wood (this could take a few weeks).
How tall is a tree stump?
Step 1. Remove the branches and trunk of the tree, leaving a stump about 3 to 4 feet tall to provide a leverage point when using the come-along.
How to cut a large tree root?
Identify a large root to cut. Plunge the sharp edge of the long metal tool, called a spud bar, into the root, in a downward spearing manner. Continue this process until the root is completely cut. Repeat this process with all of the large roots that are visible around the tree trunk.
How to attach a cable to a tree trunk?
Unwind the hook and cable from the come-long. Wrap the cable around the upper portion of the tree trunk and attach the hook to the cable, forming a loop around the tree trunk.
How to cut a tree without damaging it?
Dig out enough soil around the root with a digging bar and shovel to expose its entire circumference at a convenient place to cut it. Cutting roots is always dangerous for the tree, but you can minimize the danger by cutting as few roots and as far from the tree as possible.
How to get a tree out of the ground without killing it?
Whether you're erecting a fence, digging a pond or laying a sewer line, the presence of a large tree root can halt the project until you extricate it. You can often cut it without killing the tree, but getting it out of the ground isn't a job for a pick or shovel. A come-along can give you the help you need. It's a portable winch with a cable that you attach to the root and one that you attach to a stationary object. Cranking the ratcheting handle exerts 2 to 10 tons of pulling power, depending on the model. Wear safety glasses when operating equipment that has the potential to fling splinters or metal chains through the air.
How to get root out of ground?
Loosen the dirt around the root with a digging bar while you crank to make it easier for the root to come out of the ground. If you don't need to remove the entire root, cut it with a saw or spud bar once enough of it is out of the ground. Release the tension of the come-along before you cut it. av-override.
What is a come-along winch?
A come-along can give you the help you need. It's a portable winch with a cable that you attach to the root and one that you attach to a stationary object. Cranking the ratcheting handle exerts 2 to 10 tons of pulling power, depending on the model.
How to cut a root with a chain saw?
Use the spud bar by repeatedly spearing the root with the cutting edge. If the root is larger than 6 inches in diameter, it may be more expedient to use the chain saw.
How to fix a come-along cable?
Pump the handle of the come-along to tighten the cable and keep pumping until the root begins to move. If the cable slips, loosen the tension and re-locate the anchor point by moving the car or finding another tree.
How far away should you attach a come-along cable?
Attach one end of a come-along to a stationary object within 25 feet -- the usual length of come-along cables -- of the root. One possibility is to wrap a chain around a tree and attach the come-along to the chain. Another is to position your car near the root and attach the come-along to the tow hitch. Get the Best Mortgage Rate ...
How to get a stump out of the ground?
Move the handle down and up in a continuous motion until the roots or stump begin to pull free from the ground.
How much pull power does a cable winch pull?
Most cable ratchet winch hoists are rated for ½ to 3 tons of pulling power, depending on the make and model. Overloading your hoist can be dangerous, particularly if you’re using a hoist that doesn’t have built-in safety features like a stress link or breakable handle. Purchasing a quality hoist with built-in safety features ensures that you can’t overload it beyond its rated capacity. It’s also important to wear safety glasses and any other personal protective equipment that will keep you safe from flying pieces of wood or metal.
Why use a U frame without a handle?
Note: the handle makes it easier to ratchet the hoist, but using the U-frame without the handle first is beneficial because it provides enough tension between the stump and the stationary object that the web strap and cable won’t get tangled, frayed, or in the way of the job. ...
What is a cable ratchet winch?
A cable ratchet winch hoist (also known as a come along) is a durable, compact tool that’s ideal for lifting, tensioning, pulling, stretching, and bending in hundreds of precision tasks. Extracting a tree stump is just one of many applications, but cable hoists are commonly used by home owners, as well as commercial landscaping and tree removal services to deal with large tree roots, stumps, and bushes. If you’re looking to remove a stump from your property, grab your cable ratchet winch hoist and follow the steps outlined below!
Where is the shank hook on a tow hitch?
If using a vehicle: connect the shank hook at the top of the cable hoist to the tow hitch on the back of the vehicle.
Can you wrap a cable around a stump?
Do not attempt to wrap your cable around the stump, as it may cause fraying or severe damage to the hoist. Your strap should be made of a strong polyester webbing, with loops sewn on both ends to ensure a secure hold. Wrap your additional strap thoroughly around the tree or bush stump, creating as much manual tension as possible.
Can you ratchet a cable hoist without the handle attached?
Once the bottom shank hook on your cable hoist is properly attached to the web strap around the stump and the top shank hook on your cable hoist is properly attached to the tow hitch on your vehicle OR the web strap around your secure stationary object, you can begin to ratchet the hoist without the handle attached.
How to spool a come along?
You can do spooling by pivoting the lever arm and utilizing the latches. The come along has two latches that you can find on the body. These prevent the spool from unwinding as the force is applied to the running end with lever arm. Then there is a second latch that you will find on the lever arm and it advances the spool to coil ...
How to get roots out of a tree trunk?
Use a spud bar to cut the roots out from underneath the trunk. Continue this process until all the roots are removed from underneath the tree trunk. You see; the come-along winch can be put to very good use. As you can tell, this tool definitely has many uses.
What is a come along for shade sails?
A come along is also known as hand winch is a commonly used tool for installing shade sails. It has got a body and lever arm. On the body, there are two types of ends available. One is fixed and the other one is flexible. The running end supplies all the movement. You have to move the running end to wrap the wire end around the spool in ...
What is the second latch on a come-along?
Then there is a second latch that you will find on the lever arm and it advances the spool to coil the wire rope on it. At last, the wire rope that is present on the running end will terminate with a hook. Most of the people these days use a modified version of come-along that comes with a pulley.
How to support a post in a trench?
When the post is lying in the trench, support it with the match of 2x4s while pulling it in the upright position.
What is a come along winch?
In industries or construction sites, a come along cable winch can be used to pull new construction frames together as they are raised for a purpose. It can also be used as a towing device. So, as you can see, this tool can serve various purposes to the users. It can also be used on ships and boats or moor lines and pull anchors.
What is the purpose of "come along"?
Use of Come Along for Military Purposes. In the nations like United States, military officers and soldiers that use heavy vehicles mostly take help from this kind of equipment such as come along. These are used to strap the ammunition, mission bags, and other military supplies on the top of the surface.
How to stop a stump from rotting?
Letting the stump rot takes the least amount of effort, but it’s also the slowest method. Burying the stump in soil and leaving it alone is the simplest approach, but the stump will take years to rot this way. To help the natural rotting process along, completely bury the stump with compost to create a favorable environment for fungi. Water the stump occasionally to keep it moist and turn the compost every two weeks to allow airflow. This also promotes fungi growth. Within 8 to 10 weeks, the stump should be soft enough to remove with a shovel.
How to burn a stump under a barrel?
Even so, never leave the fire completely unattended. To make a burn barrel from a 55-gallon steel drum, cut a triangular hole in the bottom and a rectangular hole in the side near the top to allow for airflow. Position bricks or concrete blocks around the stump to keep the barrel off the ground. Place the barrel upside down over the stump, add firewood and kindling through the triangular hole, then light the wood.
What is the best fertilizer to use for a stump?
High-nitrogen fertilizer, such as 45-0-0, works as a cheaper alternative to potassium nitrate stump removers. To apply either product, drill 8- to 10-inch holes throughout the stump, pour in your stump remover of choice, add water and wait. If you used potassium nitrite, keep kids and pets away from the stump.
How to apply Epsom salt to a stump?
To apply dissolved salt, mix 1 gallon (8 lbs) of Epsom salt in 2 gallons of water and pour the solution over the stump. Cover the stump with a plastic tarp to keep the wood dry and reapply the Epsom salt every two to three weeks. This method is slow acting, so you might need to wait up to six months.
How long does it take for a tree stump to smolder?
After the fire dies down, any remaining wood, including the roots, can smolder for days . If the stump is in a dry area or surrounded by brush, thoroughly douse the fire with water before you leave for the day.
How long does it take to burn a stump?
Burning a stump away isn’t difficult, but the time required makes it somewhat impractical. That said, if you’re looking for an excuse to enjoy more backyard campfires, burning a stump is the perfect solution. A large stump can take several hours to burn, so it should give you two or three evenings around the campfire.
How much does a landscaper charge for stumps?
Landscapers typically charge a minimum fee of around $200, and that increases with the number of stumps. To get rid of a yard full of stumps, it’s generally cheaper to rent a stump grinder and do the work yourself.