- Set the toilet on the floor with the flange bolts poking through the holes in the base.
- Slip the base of a cap onto each bolt with the ridged side facing up.
- Follow this with a metal washer. The washers are supplied with the toilet bolts.
- Screw one of the nuts that are provided onto each bolt and tighten it with a wrench.
- Cut the bolt with a hacksaw or, if it has an indentation along the threads, break it with pliers.
- Set the cap on the base and push down until it snaps and locks.
How do you put toilet caps on a toilet?
As described by PlumbingSupply.com, these come with teardrop-shaped bases that fit into the toilet holes. You install them on the bolts first, just like bases for regular caps, then tighten down the nuts. The base and cap are threaded, so when the toilet bolts are tight, all you have to do is screw the caps to the bases and they're there to stay.
How do you fix a loose toilet cap bolt?
Try to cut as straight as possible so that the adapter for the new caps will thread onto the bolts easily. Hold the toilet caps next to the bolts to determine the correct bolt height, then cut the bolts short enough so the new caps will sit flush on the toilet base when they are threaded on all the way.
What size do toilet bolt caps come in?
These caps thread directly onto the bolt with no need for an adapter. They're also tall enough that you don't have to cut down the bolt unless your bolts are uncommonly long. Tall toilet bolt caps come in 1/4-inch and 5/16-inch sizes.
What is the purpose of a toilet cap?
When you install a toilet, one of the finishing touches is to cover the flange bolts — the bolts that hold the toilet to the floor — with decorative caps. These caps aren't just for show; they protect the bolts from corroding in the moist conditions in the bathroom.
How do you put plastic caps on a toilet?
0:195:03How to attach the toilet bolt caps - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou've got a toilet bowl and there is a cap on there like that when that cap are supposed to snap onMoreYou've got a toilet bowl and there is a cap on there like that when that cap are supposed to snap on down there.
How do you tighten a bolt cap on a toilet?
0:001:10Toilet Repair Tips : How to Tighten a Loose Toilet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can go ahead and snug that up. I repeat the same thing on the other side once you've got bothMoreYou can go ahead and snug that up. I repeat the same thing on the other side once you've got both sides retightened. You'll want to make sure your bowl doesn't wiggle back and forth.
What are toilet bolt caps used for?
Product Details. These toilet bolt caps provide a finished look to the toilet. They hide the ends of the bolts that are used to attach the toilet to the floor. Made of durable plastic, these bolts are white in color.
How do you remove toilet seat caps?
0:182:56Remove Toilet Seat - Replacing a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut this one a slotted screwdriver fits right into the top and I'm going to take a pair of pliers.MoreBut this one a slotted screwdriver fits right into the top and I'm going to take a pair of pliers. And I'm just going to grab the nut underneath. And I'm going to turn it counterclockwise.
How do I get my toilet cap to stay on?
The base and cap are threaded, so when the toilet bolts are tight, all you have to do is screw the caps to the bases and they're there to stay.
How tight should toilet be to floor?
As a rule of thumb, try a turn or two a side until you feel resistance, them try to wiggle the toilet bowl slightly. If there is no significant movement, you are probably tight enough. This tightening operation is a "feel" thing you get from experience, so be conservative and use your best judgement.
How do you replace a toilet tank bolt?
0:424:14How to Replace Toilet Tank to Bowl BOLTS and Gasket - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a flathead screwdriver inside the tank to hold the bolt head so it doesn't rotate on the bottomMoreUse a flathead screwdriver inside the tank to hold the bolt head so it doesn't rotate on the bottom of the bowl use a socket or a wrench to remove the nut.
What holds a toilet down?
The toilet flange, also known as a closet flange, is the part of the toilet that secures the unit to the floor and connects to the drain pipe. Usually made of PVC, rubber or metal, this piece is circular in shape and usually secured in place with a few bolts.
How do you remove toilet bolts?
0:301:46How to Get a Toilet With a Stuck Bolt Off the Floor : Toilet RepairsYouTubeStart of suggested clipEnd of suggested clipTake your wrench on the bottom side and twist them to loosen after it gets loosened you should beMoreTake your wrench on the bottom side and twist them to loosen after it gets loosened you should be able to go down there and loosen up with your hands if not just continue to work it with the tools.
How do you fix a bolt that won't tighten?
0:051:33How to Fix Toilet Bolts That Won't Tighten - YouTubeYouTubeStart of suggested clipEnd of suggested clipHello everyone i'm joshua clement and today i'm going to talk about how to fix toilet bolts that wonMoreHello everyone i'm joshua clement and today i'm going to talk about how to fix toilet bolts that won't tighten now a lot of times what causes. This is the underneath flange is actually a little warped
Why would toilet bolts loosen?
Why Are Your Toilet Bolts Loose? Your toilet bolts may be loose due to a warped toilet flange that makes tightening difficult. Additionally, use, temperature change, and the settling of your house can cause toilet bolts to gradually loosen over time.
How do you tighten a wobbly toilet?
0:555:03How To Fix A Shaking/Wobbly Toilet-2 Easy Ways - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you take a look on each side of the toilet. And you remove the cap. You'll. See that there's aMoreSo you take a look on each side of the toilet. And you remove the cap. You'll. See that there's a bolt on this side. And the same thing on this side over here. Now you can just use a regular.
How do I stop my toilet bolts from spinning?
1:323:49How to fix a Toilet Closet Bolt (Anchor Bolt) that Spins in the Closet FlangeYouTubeStart of suggested clipEnd of suggested clipI used a rag between the vice grips and the bolt to protect the threads from being damaged bothMoreI used a rag between the vice grips and the bolt to protect the threads from being damaged both bolts are now secure and will not rotate when bolting the toilet.
What do you cover the bolts on a toilet?
When you install a toilet, one of the finishing touches is to cover the flange bolts — the bolts that hold the toilet to the floor — with decorative caps. These caps aren't just for show; they protect the bolts from corroding in the moist conditions in the bathroom.
How many parts does a toilet bolt cap have?
The Cap Has Two Parts. The decorative part of a toilet bolt cap is a white, round piece of plastic that's a little more than an inch in height, but if that were the only part that came in the bag, you'd have no way of securing the cap to the toilet. In fact, the cap comes with a base to hold it, and the base has to be installed before you bolt ...
Is it hard to install a cap?
Cap installation isn't difficult , but one of the frustrating facts of life that plumbers have to face is that the cap is usually too short for the bolt, so the bolt has to be cut. Fortunately, there's now a solution for that. Advertisement.
Can you put a toilet base upside down?
That's why you often see exposed toilet bolts or caps partially hanging from the top of a bolt. The bases have to go on before you screw on the nuts to secure the toilet.
Do you need to install a base before bolting a toilet down?
In fact, the cap comes with a base to hold it, and the base has to be installed before you bolt the toilet down. It's good to take a close look at how the cap and base fit together. Examine the base and you'll see that it has a ridge on one side and is flat on the other. Push the ridged side of the base into the cap and they'll snap together.
What is the purpose of sealing a toilet drain?
Sealing a toilet drain protects your plumbing and prevents noxious gases from entering your home. To seal the drainage hole, you must remove the old wax seal and the toilet flange. You can then apply a permanent cap or a temporary plug.
How big is a toilet drain?
Now, you’ll need to take note of the size of your toilet drain. The standard diameter of toilet drains is three inches. But, it’s not uncommon to see four-inch drains in older homes. Take some quick measurements and pick up a pressure drain that works for your situation. These plugs aren’t expensive at all.
What is a conical plug?
These are small conical plugs made out of either wood or rubber. The simple tool works on very basic principles. The conical shape lets you wedge the plug into the floor drain. The pressure on the sides of the drain keeps the plug in place and create an airtight seal. The first thing you’ll need to do is turn off the toilet’s water shutoff valve. ...
What does a toilet valve do?
The valve stops the flow of liquids and gases immediately. It’s a good fail-stop to have in the event of an emergency. Whenever you need to plug your toilet, just lower the valve outside.
What is a bladder plug?
A favorite among plumbers and contractors is the inflatable test ball. It’s also referred to as a bladder plug or a cleaning bladder. Whatever you call it, this option offers a lot of versatility.
Can you use a toilet for longer than a few hours?
Here’s a temporary solution that can provide some short-term protection from sewer fumes . This isn’t a technique that you can use for longer than a few hours. It’s meant to buy you some time as you’re swapping out an older toilet with a newer one.
Can you use an inflatable test ball to protect a drain?
It’s also great for preventing backflow caused by flooding. Rather than plugging just the drain, you can use it to protect all the drains in your home. To do that, you would need to insert the plug into the sewer clean-out fitting. Inflatable test balls are a bit more complex than standard pressure plugs.
How to get toilet caps to sit flush?
Try to cut as straight as possible so that the adapter for the new caps will thread onto the bolts easily. Hold the toilet caps next to the bolts to determine the correct bolt height, then cut the bolts short enough so the new caps will sit flush on the toilet base when they are threaded on all the way.
What size are toilet bolt caps?
They're also tall enough that you don't have to cut down the bolt unless your bolts are uncommonly long. Tall toilet bolt caps come in 1/4-inch and 5/16-inch sizes.
What is threaded cap?
Threaded Caps. Threaded caps are an improvement over standard snap-on caps for a few reasons. First, you don't have to remove the nut and metal washer from the closet bolt. Instead, you just thread an adapter piece onto the bolt, and the cap snaps or threads onto the adapter.
How to hold a bolt in place?
To do so, hand roll the putty into a small tube shape, place on the bottom of the cap and press the cap back down over the bolt. Be aware that this method will make it harder to access the carriage bolts in the future if need be.
How to cut closet bolts down?
If so, you'll need to cut them down using a hacksaw or rotary tool. Use the cap as a guide and make the bolts as short as they need to be fit beneath it.
What size threaded adapter for toilet?
A set of replacement toilet caps typically includes two different sets of threaded adapters: 1/4 inch and 5/16 inch. The 1/4-inch size is the more standard.
How to install a cap on a bolt?
To install the cap, simply fit it over the bolt and snap it onto the plastic base washer.
How to pound a toilet drain?
Pound a plug into the toilet drain with a rubber mallet. Most plugs are made of rubber but some are wooden. Pound on the top until the plug is firmly seated.
What is the cap off the drain made of?
Cap off the drain with a toilet cover. These are generally made of rubber or the cap is PVC with a rubber skirt. They literally cap off the drain while the skirt is clamped around the pipe with hose clamps using a screwdriver or small wrench.
Why do you close off a toilet drain?
In areas of flooding, closing a toilet drain will prevent raw sewage from flooding up and into the toilet, or perhaps the toilet is no longer needed in that particular area of the house. The seal will need to be both air- ...
How big is a toilet drain hole?
Measure the size of the drain hole across the top. Virtually all toilets will measure either 3 or 4 inches. This measurement will determine what size cap or plug you will use.
How many inches does a toilet plug measure?
Virtually all toilets will measure either 3 or 4 inches. This measurement will determine what size cap or plug you will use. Check inside the flange for threads. If there are threads, you will be able to use a threaded cap. Get the correctly sized fitting cap or plug.
Why do toilets need a seal?
The seal will need to be both air- and water-tight to prevent both sewer fumes and waste water from breaching the drain. Most toilet drains are standardized, but on older or antique houses, there might be a difference in toilet drain circumference that must be accounted for. Remove the toilet.
Can you glued a PVC drain to a copper pipe?
There are many styles of toilet drains used in homes. Some, like a PVC drain, can be capped and glued on with no clamps at all. On pure copper drain pipes, a cap can be soldered into place. Choose the type of cap and/or plug that works best for your situation.
