Put the Swiffer down onto the pad and hold for three seconds and the pad should automatically stick on. Swiffer pads have an extra-tough-spot cleaning strip that is textured. It can be found on one side of the mopping pad. When applying the pad to the Swiffer, put the tough-side at the back end of the mop. How do you use a wet mop pad?
How do you use Swiffer pads?
Once removed, line the adhesive up with the bottom of your Swiffer. Put the Swiffer down onto the pad and hold for three seconds and the pad should automatically stick on. Swiffer pads have an extra-tough-spot cleaning strip that is textured. It can be found on one side of the mopping pad.
Can you use a Swiffer WetJet as a mop?
A Swiffer WetJet is an alternative to the old mop and bucket. Instead of filling up a bucket and using the same mop that has been used on dirty floors before, you can use a fresh pad each time with a Swiffer WetJet. You must use the Swiffer the proper way for best results. credit: Jitalia17/E+/GettyImages.
How do I assemble my Swiffer WetJet?
To assemble your Swiffer WetJet, first remove all of the parts from the box and unwrap the packaging. Then, snap the 3 poles together. Remove the battery panel and add 4 AA batteries to power your Swiffer. After the batteries are in place, turn your Swiffer upside down and push the bottle containing the cleaning solution into the Swiffer holder.
How do you clean a Swiffer with a mop cloth?
Open the flaps. Hold the Swiffer above the mopping cloth, and center its rubber rectangular mopping surface over the rectangular shape on the mopping cloth. Place the Swiffer down on the cloth so that the green scrubbing strip is located at the top.
Where is the swiffer pad?
Swiffer pads have an extra-tough-spot cleaning strip that is textured. It can be found on one side of the mopping pad. When applying the pad to the Swiffer, put the tough-side at the back end of the mop. Swiffer pads come in many styles with different cleaning products.
How to unwrap a swiffer?
Unwrap the Swiffer. Open the box and unwrap all the pieces. This includes removing any sticky tape from the handle, floor piece, cleaning solution and cleaning pads. Set all these items to the side for easy access.
How many batteries does a swiffer need?
Insert batteries. Your Swiffer will generally require 4 AA batteries. To remove the battery panel, click the notch inside the area that holds the cleaning supply. Open the cover and insert the batteries.
What is a swiffer wetjet?
Swiffer WetJets come in a variety of styles and are great for convenience and easy to assemble. Whether assembling a battery powered model or simply changing the batteries of your Swiffer, use your WetJet to clean tile, wood, laminate, vinyl or linoleum floors. Steps.
What to do if a swiffer doesn't release liquid?
If the Swiffer doesn’t release liquid, disassemble it and check that the batteries have been inserted correctly.
How to extend a swiffer pole?
2. Snap the 3 pieces of the pole together. After lining up all 3 of the main pieces, snap the pole with the mop, the middle pole, and the pole with the handle together. If your Swiffer is pre-assembled, you may need to pull the handle to extend the pole. Listen for a click. Once the pole is extended, it is permanently extended.
How long does it take for a swiffer to stick to the pad?
Once removed, line the adhesive up with the bottom of your Swiffer. Put the Swiffer down onto the pad and hold for three seconds and the pad should automatically stick on.
Step 1
Place the mopping cloth on the floor so the folded flaps of the cloth are facing upward. Open the flaps.
Step 2
Hold the Swiffer above the mopping cloth, and center its rubber rectangular mopping surface over the rectangular shape on the mopping cloth. Place the Swiffer down on the cloth so that the green scrubbing strip is located at the top.
Step 3
Fold the flaps of the mopping cloth over onto the plastic top of the Swiffer (opposite the rubber side). Lock the cloth in place by pressing its corners into the four rubber cloth grippers at the corresponding spots.
What is a swiffer wetjet?
A Swiffer WetJet is an alternative to the old mop and bucket. Instead of filling up a bucket and using the same mop that has been used on dirty floors before, you can use a fresh pad each time with a Swiffer WetJet. You must use the Swiffer the proper way for best results.
Do you need to take off the dirty pad when cleaning the floor?
Each time you're finished cleaning your floor , you will need to take off the dirty pad. The following time, you start with a fresh pad. You will see where you will need to secure the edges of your pad into the back and front grips on the Swiffer itself.
Can you use a Swiffer wetjet on tile?
You can use the Swiffer WetJet on just about any floor type. Whether you have ceramic tile, laminate, wood or marble, you can reap the benefits of this mop.
