1. Add a crimp with loop to one end of the beading chain squeeze the central band of the tube gently with snipe nose pliers. 2. Thread on your choice of beads.
How do you attach beads to a wire?
Thread your first bead onto the wire. Thread the extra tail of wire through the bead hole. Use your flush cutters to cut off the loose end of the cord as close as possible to the bead. Thread the rest of your beads according to your design until you reach the other end. Tighten your beads.
How do you attach a clasp to a necklace?
When you are ready to attach a clasp, first thread the end of your beading wire (jewelry cable) through a crimp bead and then through the eye of the clasp. [3] Your design might call for other kinds of end pieces, such as a closed or solid jump ring or extender chain. The same methods apply for these as for clasps. Form a loop.
How do you make a crimp bead necklace?
Forming the Crimp Beads Slide the crimp bead down the wire. Move the crimp bead close to the end of the clasp or end piece. Flatten the bead. Use crimping pliers to flatten the bead. Round the bead. Round it with crimping pliers. Use chain or needle nose pliers. If you don’t have a pair of crimping pliers, you can use regular pliers.
How can I flatten the bead on my bracelet?
You want to have a small loop around the clasp or end piece, but not so small that it holds the clasp so tightly that it cannot move freely. Flatten the bead. Use crimping pliers to flatten the bead. Squeeze the beads with the flatter back channel of the crimping pliers that is closest to the handle. Gently but firmly squeeze the pliers closed.
How do you attach beads to chains?
5:016:46How to Attach a Bead to Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want the B to be fitting tightly with the size of the circle. You're gonna hold it tight andMoreYou want the B to be fitting tightly with the size of the circle. You're gonna hold it tight and just slightly open and it's going to slightly twist. Back here it's here you see the opening.
How do you put pearls on a chain necklace?
4:365:32Jewlery Tutorials: Episode 13: Pearl Chain Necklace - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis one of my pouch arms on each side of this link and then just put another pearl on the otherMoreThis one of my pouch arms on each side of this link and then just put another pearl on the other side. And then another figure 8. Until you get to the desired length. And then at the end.
How do you make a beaded necklace?
0:166:36How To Bead A Necklace: Bead Stringing - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd for that you need two jump rings two clamshell bead tips. And two crimp beads you'll also need aMoreAnd for that you need two jump rings two clamshell bead tips. And two crimp beads you'll also need a toggle clasp. For tools you'll need round nose pliers chain nose pliers and wire cutters.
How do you make a bead necklace dangle?
5:3616:47How To Make A Dangling Bead Necklace: Jewelry Making TutorialYouTubeStart of suggested clipEnd of suggested clipTo do that we're going to take a head pin and slide our first bead onto. The head pin all the wayMoreTo do that we're going to take a head pin and slide our first bead onto. The head pin all the way down to the end. And then I'm going to hold on to the bead.
How do you make a pearl chain?
0:007:02DIY Pearl Necklace with Beading Wire, How to get started, Ideas for ...YouTubeStart of suggested clipEnd of suggested clipSo you want to just begin by getting all your pearls onto your beading. Wire. Once you have all yourMoreSo you want to just begin by getting all your pearls onto your beading. Wire. Once you have all your pearls on your beading wire you want to take your crimp bead. And slide that onto the wire as well.DIY Pearl Necklace with Beading Wire, How to get started, Ideas for ...https://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you make a pearl chain?
How do you attach a pendant to a string of pearls?
0:411:34Placing a Pendant on the String of a Beaded Necklace : Craft Time!YouTubeStart of suggested clipEnd of suggested clipTo attach your pendant. Once you have it hooked on use your pliers clamp it back together make sureMoreTo attach your pendant. Once you have it hooked on use your pliers clamp it back together make sure that the two sides of the ring line up. And that there's no hole. Left.Placing a Pendant on the String of a Beaded Necklace : Craft Time!https://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you attach a pendant to a string of pearls?
How do you make a pearl necklace with a clasp?
7:0612:44How to Make A Pearl Necklace - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst. Then we'll take our French wire or a GIMP. Put it through a needle. We'll take my diamonteMoreFirst. Then we'll take our French wire or a GIMP. Put it through a needle. We'll take my diamonte clasp and put it through the split ring. And I'll just put that through the center of my GIMP.How to Make A Pearl Necklace - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you make a pearl necklace with a clasp?
Can you string pearls on beading wire?
A. The best way to securely feature pearls in a jewelry design is to knot between each pearl on silk cord or beading wire. The knots act as buffers between each pearl as well as help prevent losing all of the pearls should the thread give way in one spot.Pearls, Knotting - b7hu - Fire Mountain Gems and Beadshttps://www.firemountaingems.com › ask-the-expertshttps://www.firemountaingems.com › ask-the-expertsSearch for: Can you string pearls on beading wire?
Step 1
To start, Use pliers to undo the chain, make small sections. Use the pliers to open the jump rings and attach them to two small sections of chain and the clasp.
Step 2: Bead and Chain Necklace
Use your pliers to open up the ends of two eye pins and attach them to each end and use the pliers to close the eyes again. Feed on some beads.
Step 3
Then carry on adding alternate chain, then eyepin/wire and beads. When you get to a decent length, you can either just attach the ends together, or add a larger jump ring and add some chain and eyepin/wire drops.
Tuesday, November 26, 2013
Today I'm sharing chain and bead necklace I made for my New Year's Eve project with Prima Bead. I love the look the layers of chain add to the necklace. I also love the classic feel of grey and silver. This piece will go with just about anything.
How to Make a Chain and Bead Necklace
Today I'm sharing chain and bead necklace I made for my New Year's Eve project with Prima Bead. I love the look the layers of chain add to the necklace. I also love the classic feel of grey and silver. This piece will go with just about anything.
How to make a bead necklace?
Thread your first bead onto the wire. Thread the extra tail of wire through the bead hole. Use your flush cutters to cut off the loose end of the cord as close as possible to the bead. Thread the rest of your beads according to your design until you reach the other end.
How to make a c shape on a bracelet?
Move the crimp bead close to the end of the clasp. Next, use crimping pliers to flatten the bead in the middle to form a " c" shape and round out the shape . Thread the rest of your beads onto the wire according to your design until you reach the other end.
How to tighten crimp bead?
When you are ready to attach your final clasp to the end of your piece, thread the crimp bead and clasp just like before, but now you will want to tighten all of your beads by pulling on the tail end of the loose wire. This will snug all your beads up together, leaving no gaps in your design.
How to flatten a bead?
Flatten the bead. Use crimping pliers to flatten the bead. Squeeze the beads with the flatter back channel of the crimping pliers that is closest to the handle . Gently but firmly squeeze the pliers closed. This will both flatten and place a dent in the middle of the crimp bead so that it resembles the letter “C”.
How to crimp a clasp?
Slide the crimp bead down the wire. Move the crimp bead close to the end of the clasp or end piece. Check the crimp bead and make sure it is not too close to the clasp or end piece. You want to have a small loop around the clasp or end piece, but not so small that it holds the clasp so tightly that it cannot move freely.
How to make a loop with a clasp?
Form a loop. Form the loop through the clasp and crimp bead. After threading the crimp and clasp, feed the wire back through the crimp bead, forming a loop. It is a good idea to leave a tail of wire a couple of inches longer than you think you need so you will have some wire to work with.
How to secure beads to a clasp?
When you are ready to attach a clasp, first thread the end of your beading wire (jewelry cable) through a crimp bead and then through the eye of the clasp.
How to string beads on a headpin?
String the beads in the order you want on a headpin. Before starting make all of your links ahead of time and space them out as you would like them to look on the finished product. When attaching the links, make sure they are on the same side of the chain.
How to make a headpin with beads?
Step-by-Step Instructions. Step 1. String the beads in the order you want on a headpin. Before starting make all of your links ahead of time and space them out as you would like them to look on the finished product. When attaching the links, make sure they are on the same side of the chain. Step 2.
How to open a jump ring?
For a charm, simply open an open jump ring by twisting it side to side using chain nose pliers. Never open the ends by pulling vertically away from each other as this will weaken the link. Attach the charm and close the jump ring.
What are bead tips?
When you're stringing beads or pearls on a necklace with thread, bead tips are the answer! They conceal knots and make a strong attachment place for clasps. The bead tips video tutorial offers ''tips'' on using these handy little findings with style and flair.
What is a lariat necklace?
The lariat necklace is held together by a flexible element such as a drop or ring--you run one end of the necklace through the flexible element and drape, tie or loop it to hold in place. Lariat-style closures are great when you've chosen to make a tassel necklace!
What is mon ami?
One in a bullion, mon ami. Thread creates jewelry with great drape and flow, especially when making knotted pearl necklaces. To protect soft thread from the wear-and-tear of harder components such as clasps, it's French wire to the rescue!
Do you start a necklace at the beginning or end?
You don't want to start at the beginning--you want to start at the end and choose how you want to finish the necklace before you begin. There are many ways to make necklaces, whether you're looking to put a pendant on a chain or want to know how to string beads. There aren't that many ways to finish jewelry--even a necklace without a clasp.
