How to Add Coolant: Chevrolet Cobalt (2005-2010)
- Getting Started - Prepare for the repair
- Open the Hood - How to pop the hood and prop it open
- Find Reservoir - Locate the coolant reservoir and clean it
- Check Level - Determine the coolant level
- Add Coolant - Determine coolant type and add fluid properly
- Replace Cap - Secure the coolant reservoir cap
- Locate Hoses - Locate the coolant hoses and connection points
- Assess Hoses - Tips for how to assess the condition of the hoses
- More Info. - Additional Information on adding Coolant
- Find Reservoir - Locate the coolant reservoir and clean it.
- Check Level - Determine the coolant level.
- Add Coolant - Determine coolant type and add fluid properly.
- Replace Cap - Secure the coolant reservoir cap.
How do you add coolant to a Chevy Silverado?
Be sure to check your owners manual to determine the correct type of fluid to add - for Chevrolets, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water.
Can you mix cobalt coolant with regular coolant?
Make sure you have a big bucket to catch the coolant in or you will be making a huge mess, also have some rags on hand to wipe up any mess. The cobalt uses ONLY DEX-COOL extended life radiator coolant and cannot be mixed with the regular green anti-freeze radiator coolant, as will form an acid that is very damaging to your cooling system.
How do you mix coolant with distilled water?
Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water. Some coolants will come premixed-that is, you don't need to add any water.
Where do you drain the coolant from the radiator on a Ford?
The radiator coolant drain petcock is located on the bottom corner of the radiator on the passenger side of the vehicle. If you turn the petcock and open the valve, the radiator coolant will drain out of the drain hole on the bottom passenger side of the radiator.
How do I add coolant to my Chevy Cobalt?
0:101:07How to check your radiator fluid and add coolant - Chevrolet IndiaYouTubeStart of suggested clipEnd of suggested clipIf. It's below the GNAT or coolant chevrolet recommends using a silicate free coolant mix one partMoreIf. It's below the GNAT or coolant chevrolet recommends using a silicate free coolant mix one part coolant to one part clean drinking water top-up.
Where is the coolant on a Chevy Cobalt?
0:4210:172005 Chevy Cobalt coolant Leak Check - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a sealed radiator. So the cap is actually on the reservoir tank.MoreIt's a sealed radiator. So the cap is actually on the reservoir tank.
What kind of coolant does a Chevy Cobalt use?
Prestone - DEX-COOL 50/50 Antifreeze / Coolant - Gallon (Part No. AF850)
Can I just pour coolant into my car?
If the coolant level is low, add the correct coolant to the reservoir (not the radiator itself). You can use diluted coolant by itself, or a 50/50 mixture of concentrated coolant and distilled water. When the coolant rises to the cold fill line, replace the cap and tighten it until you feel it click. Close the hood.
Is coolant the same as antifreeze?
Engine coolant, also known as antifreeze, is mixed with water to keep the radiator from freezing in extreme cold and overheating in extreme heat. There are many different types of coolant, so it's important to know what variety is right for your car or truck.
Is radiator fluid the same as coolant?
And now you know that antifreeze and coolant are basically the same thing and can be generically referred to as radiator fluid. And you also know this fluid is key to keeping your vehicle engine in good working order and helps prevent it from freezing or overheating in any weather.
How do you put coolant in a 2006 Chevy Cobalt?
0:091:19How to Check and Add Coolant - YouTubeYouTubeStart of suggested clipEnd of suggested clipFollow the hose that comes from the top of the radiator cap it will lead you to the coolantMoreFollow the hose that comes from the top of the radiator cap it will lead you to the coolant reservoir it is usually a clear plastic tank with full and low indicators on the outside.
What kind of coolant does a 2006 Chevy Cobalt take?
3 Answers. The factory coolant is Dex Cool. It is a yellow/orange color as opposed to the other type which is green.
What kind of coolant do I need for a 2006 Chevy Cobalt?
Zerex 1 Gallon Orange 50/50 Antifreeze.
How do I know if my car needs coolant?
5 Signs That Your Vehicle Needs An Antifreeze/Coolant ServiceThe temperature gauge reads hotter than normal when the engine is running.Antifreeze leaks and puddles beneath your vehicle (orange or green fluid)A grinding noise is coming from under the hood of your car.More items...•
How long should I wait to drive after adding coolant?
“Your personal safety is most important,” he says. “Waiting for at least 15 minutes allows the hood, engine and leaking coolant to cool.”
Should I let my car run after adding coolant?
Yes, run the engine After you do any work involved with draining the coolant you will either have an exact process to remove air from the cooling system or you will simply run the engine. If you don't the gasses (air) will expand at a greater rate than liquid when the engine get's hot.
How to fill a Cobalt radiator?
The first procedure is to take the upper radiator hose off and pour the radiator coolant in until the radiator is full. Then you replace the radiator hose and fill the coolant surge tank bottle to the correct level (cold fill line).
Where is the radiator drain petcock on a 2013 Chevy Cobalt?
by admin. How to change the radiator coolant on a Chevrolet Cobalt is not your normal procedure as done on older vehicles, so follow correct procedure. The radiator coolant drain petcock is located on the bottom corner of the radiator on the passenger side of the vehicle.
How to drain radiator fluid?
Place a large drain bucket or pan under the radiator drain petcock on bottom of radiator, on passenger side of car. Remove the top off the surge tank/coolant fill bottle in engine compartment. Turning the rad drain petcock counterclockwise 1-2 full turns to start draining radiator fluid.
How long does Cobalt coolant last?
Looking into my 2006 Cobalt Owner’s Manual it states that DEX-COOL is designed to remain in your Cobalt for five years or 150,000 miles (240,000 km) ...
Where is the coolant drain hole on a car?
The radiator coolant drain petcock is located on the bottom corner of the radiator on the passenger side of the vehicle. If you turn the petcock and open the valve, the radiator coolant will drain out of the drain hole on the bottom passenger side of the radiator.
Does Dexcool jell up?
DEXCOOL is known to je ll up and do other strange damaging stuff to all your internal components (engine, heater core, radiator) if not changed on a regular scheduled maintenance.
