how do you put elastic on a sleeve

1. Measure the width of the elastic. Your casing will need to be slightly wider than your elastic, so start by measuring the width of your elastic.
2. Fold over the required amount of fabric. Use the measurement you determined and fold over this amount of fabric.
3. Mark the area for an opening wide enough to fit the elastic into. ...
4. Sew along the edge of the fabric to secure the casing. ...
5. Measure and cut the elastic. After you have finished creating the casing, determine how much elastic you will need to insert into the casing.
Attach a safety pin to one end of the elastic. ...
Insert the safety pin and elastic through the opening in the casing. Take the closed safety pin and insert it through the opening you have left in your casing.
Stretch and pull the fabric to work the safety pin through the casing. [5] After you insert the safety pin, push it into the casing further.
Secure the other end of the elastic. Hold onto the other end of the elastic as you push and pull the safety pin through.
Match up the ends of the elastic and sew them together. ...
Close the opening in the casing. After you have attached the ends of your elastic band, tug on the elastic to ensure that all parts of the elastic band ...

Full Answer

Can you sew elastic into the cuff of a shirt?

If you have a pair of pants or a shirt that needs cuff tightening or alterations, you can sew elastic into the cuff. This project is simple to do yourself with a sewing machine and basic sewing skills.

How do you sew elastic to fabric?

Make sure that the edge of the elastic is about 0.25 inches (0.64 cm) from the edge of the fabric. This will ensure that the elastic will be hidden when you sew the elastic in place. Sew the elastic to the inside of the fabric. After you have finished pinning the elastic to the fabric, sew the elastic in place using your sewing machine.

How do you sew a tight elastic band together?

Then sew those two ends of the elastic together. Either use a zigzag stitch to do it or just go over and over and over it about 10 times to make sure it is sewn tight. Now you just need to close that opening that you had.

How do you cut elastic to make it fit?

If the person wants the elastic to fit snugly, then subtract some length from the measurement. For example, if the person wants a somewhat snug waistband, then subtract 2 inches (5.1 cm) to 4 inches (10 cm) from the waist measurement and cut the elastic to this length. 2. Sew together the ends of your elastic.

How do you attach elastic?

2:577:28Learn How To Sew: Sewing Elastic (Episode 7) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are many different ways to attach elastic the three most common methods are by sewing directlyMoreThere are many different ways to attach elastic the three most common methods are by sewing directly on the fabric. Creating a casing or creating a tunnel slash.

How do you fix elastic on jacket sleeves?

0:141:16Fix the worn out elasticity in your jacket sleeves | FASHION HACKYouTubeStart of suggested clipEnd of suggested clipAs you can see my jacket is very worn out all you would need is two rubber bands or elastic bands.MoreAs you can see my jacket is very worn out all you would need is two rubber bands or elastic bands. Any color can work the gutter will hide the colors.

How do you hand elastic directly to fabric?

5:269:09How to Hand Sew Elastic to a Bikini Bottom - YouTubeYouTubeStart of suggested clipEnd of suggested clipThrough both the elastic. And the fabrics all the way behind your stitch behind your fabric. AndMoreThrough both the elastic. And the fabrics all the way behind your stitch behind your fabric. And then come back up through the other side so then go through the fabric. And up through the elastic.

How do you put elastic on a jacket?

This is how you add adjustable elastic cord to a garment....Apply two eyelets. Apply them fairly close together were your want to place the cord ends. ... Attach a stopper at one end of the elastic.Thread the elastic cording. Then attach the end in the seam allowance. ... Repeat the process on the other side. ... Now close the casing.

How do you replace the elastic on a jacket cuff?

Open the stitching around the cuff if there is a hem. ... Turn the cuff under -- to the backside -- 1/4 of an inch and press with an iron to hold in place. ... Sew the turned-under cuff casing about 1/8 inch away from the inside edge, leaving a 1-inch long hole to insert the elastic.More items...

How do you put elastic on fabric without sewing?

There are two great ways to attach fabric without sewing: fabric glue or a fusible bonding tape like Dritz Stitch Witchery.

Do you stretch elastic when sewing?

Make sure to stretch the elastic out as you sew so that it will be the same length as the fabric. Sew all the way around the elastic and overlap the beginning of the stitching slightly when you have sewn all the way around the elastic.

What tension should I use for elastic?

3-8%Generally elastic works best when stretched 3-8%, with 8% only being used on the smaller parts of the garment as it's a bit extreme, as remember the more you stretch the elastic the more stitches you are putting on that space of elastic.

How can I fix my elastic jacket?

1:173:58How to Replace Elastic Waistbands - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put the elastic on the inside. Start sewing the elastic with a zig-zag overcasting or joiningMoreAnd put the elastic on the inside. Start sewing the elastic with a zig-zag overcasting or joining stitch wherever you start when you get back to that place so a couple of stitches overlapping.

How do you restore the elasticity of clothing?

Simply cut a small slit on the interior of the fabric, preferably on the side seam on the inside of the garment. Pull out the old elastic amount that you need to take out, cut and overlap the ends together, then join the elastic properly so that it doesn't pop when stretched out.

How do you tighten a jacket cuff?

0:212:33How to Tighten Up Sleeve Cuffs - YouTubeYouTubeStart of suggested clipEnd of suggested clipSolution what you're going to want to do is boil some water pour it in a bowl. Something that has aMoreSolution what you're going to want to do is boil some water pour it in a bowl. Something that has a large lip. So you don't get it everywhere because it's pretty hot.

How do I loosen the elastic on my sleeves?

With the damp cloth on top of your elastic band and your iron on the highest setting, iron over it. Iron for 10 seconds and then let sit for 10 seconds. Continue doing so for 5-10 minutes.

How to flatten a cuff?

Open the stitching around the cuff if there is a hem. Press the cuff with a hot iron to remove any bumps and flatten the fabric.

What is casing and feeding elastic?

Sewing a casing and feeding elastic through is a method of tightening the cuff or adding poof to the leg or sleeve. A casing for the elastic lets you alter the tightness in the future by removing the stitching and replacing the elastic. Advertisement.

How far away from the inside edge of a cuff?

Sew the turned-under cuff casing about 1/8 inch away from the inside edge, leaving a 1-inch long hole to insert the elastic.

How to move safety pins around casing?

Feed the safety pin through the hole of the casing. Use a push and pull action to move the pin and elastic around the casing. Pin the opposite end of the elastic to the edge of the casing so you do not pull it through.

How to shorten a sleeve without rehemming?

A really fun (and cute!) way to shorten a sleeve or pant leg without re-hemming is to add a bit of ruching. You can do this to RTW clothes as easily as clothing you have made for yourself, and best of all—it is fast and easy!

How many stitches do you need to secure elastic?

5. Secure the elastic in place by backstitching over the elastic to the hem edge, and then take 5-6 stitches forward and stop.

How to attach elastic to fabric?

Pin the elastic to your fabric in 4 evenly spaced places. Start by pinning the seam of the elastic (the area you just sewed) to the seam on your fabric. If there is no seam in the fabric, then just choose any spot to place your first pin. Then, pin the opposite side of the elastic to the opposite side of the fabric band, and do the same for the two opposing sides of the elastic. Pinning the elastic this way will divide the elastic band and fabric into quarters and attach it evenly to 4 sections.

How to sew elastic bands together?

Sew together the ends of your elastic. Overlap the ends of the elastic by about 0.25 inches (0.64 cm) to 0.5 inches (1.3 cm). Use the zigzag stitch setting on your sewing machine and sew across the overlapping elastic 2 or 3 times. This will ensure that the ends of the elastic band are well connected.

How to sew a casing on a sleeve?

When the fabric is folded and secured how you want it to be, use your sewing machine to sew a straight stitch about 0.25 inches (0.64 cm) from the edges of the fabric. This will provide plenty of room for the elastic while also ensuring a secure casing.

How to sew elastic into casing?

You will need to leave an opening in the casing to slide the elastic into the casing. After the elastic is all the way through and you have connected the ends of the elastic, you will sew this opening closed. Mark the area where you want the leave the opening using a piece of chalk or by placing 2 pins on each side of the opening.

How to sew a zigzag stitch?

Sew along the bottom edges of the folded fabric. Pull the elastic taut again to make it even with the fabric and the begin sewing a zigzag stitch along the bottom edge of the elastic. This stitch should be right along the bottom edge of your fabric.

How to measure for elastic?

Measure and cut the elastic. 1 For example, if the elastic is part of a shirt cuff, then measure around the person’s wrist or arm where the elastic will go. Use this measurement to determine how much elastic you will need, and cut the elastic to this length. 2 Depending on how tight the person wants the elastic to be, you may need to subtract some length from the measurement. For example, if the person wants to ensure that the cuffs on the garment stay put, then you might subtract 0.5 inches (1.3 cm) from the wrist measurement to ensure a snug fit.

How much to subtract from wrist measurement?

For example, if the person wants to ensure that the cuffs on the garment stay put, then you might subtract 0.5 inches (1.3 cm) from the wrist measurement to ensure a snug fit.

Why is it harder to put on a sleeve?

Also, as you roll up the sleeve before putting it on, the inside diameter (size) of the sleeve gets smaller which makes it both harder to put on and harder to take off. As you roll it back up to take it off, it pushes all the blood towards your glans (like a jelq or ULI).

Where do you put a rolled up ring?

The you place the rolled up ring on the end of your penis, then unroll it over your penis like you are putting on a condom. I hope that helps. That works well if you’re flaccid girth is not much bigger than the inside of the sleeve and you don’t mind covering your glans.

How to make a sleeve tighter?

Make sure that your elastic did not get twisted up inside. Then sew those two ends of the elastic together. Either use a zigzag stitch to do it or just go over and over and over it about 10 times to make sure it is sewn tight .

How to make elastic waistband for pajamas?

You will follow the same steps, just at the top of the pajamas. So, fold your fabric over once about an inch so that wrong sides are together and then again about an inch. Pin it and/or press it to hold it in place.

How to make a casing for elastic?

To create what we call a casing for your elastic, you will start out by folding down your fabric almost as if you were going to hem it. So, you’ll fold the fabric so that wrong sides are together. Fold it down about an inch or so: And then again one more time: Press that seam or pin it in place (or both):

Can you put a waistband on a flat piece of fabric?

OK, so those are the basics of how to do it. But, generally you aren’t going to be doing it on a flat piece of fabric like that. Usually you are going to be inserting it into a waist band, so your fabric is already going to be in a loop.

Can I make my own pajama pants?

One of the best options for this is pajama pants! You can do them for yourself or a kid or anyone you want. I have a tutorial on how to create your own pajama pants without a pattern. If that’s too scary, try Pinterest for patterns or grab a real pattern from the store:

Can you pin elastic through a hole?

BUT, make sure you don’t let the other end of the elastic pull through the end you started on. You can pin it in place or just hold onto it, just don’t let it follow through the hole. Pull till your safety pin comes out the other side: And your fabric will now be gathered: OK, so those are the basics of how to do it.

Method 1: The Wet Stretch Method

You need to spray water generously on the sleeves of the shirt that you are planning to stretch. Now, take the shirt and get it laid out on a dry towel, while making sure that you do not try to wring out the water.

Method 2: The Hair Conditioner Method

You would find this method a lot similar to the previous one. So, in this case, you will have to fill a sink or bucket with some cold water and put a few drops of hair conditioner in it. Now, make sure only the sleeves are soaking in this water for fifteen minutes.

Method 3: Wearing The Shirt With Wet Sleeves

Start by soaking or washing your shirt as you did in the previous two methods. You can choose to add the hair condition to make stretching easier, or you can do with just water. After the shirt is nice and wet, put it on without wringing it.

Method 4: Using Foam Rollers Or Paper Towels

There is no need to take your shirt through a good foam rolling schedule. Now, this method is a lot easier than that. Plus, in case you don’t have any foam rollers near at hand, you can do the same thing using a paper towel.

Method 5: Put Lace Using Fabric Glue

If your shirt needs a bit of room in the sleeve area, you can consider adding a nice lace insert from the back using some fabric glue. It will leave a portion of the sleeves exposed through that lace, and that will look really cool.

Method 6: Use Your Hair Dryer To Loosen The Sleeves

Lay out your shirt on the bed or floor, depending on which one is close to an electric socket. Now, plug in your hair dryer and get to work.

Method 7: Use A Good Quality Fabric Softener

Again, this method will feel a lot like the second one. But in this case, you will use a fabric softener instead of your hair conditioner. Also, this is mainly for the type of materials that are difficult to stretch, such as polyester. You will get good fabric softeners at any store near you.

How to stretch elastic?

Place the damp cloth over your elastic. Make sure it completely covers the elastic that you’re trying to stretch out. If needed, use two cloths. Iron the elastic. With the damp cloth on top of your elastic band and your iron on the highest setting, iron over it. Iron for 10 seconds and then let sit for 10 seconds.

How to find elastic in a shirt?

If this is the case, you won’t be able to pull the elastic out of them if you cut the somewhere other than the seam. Find the seam by holding on one side of the seam and stretching the other side. If you feel the elastic shift, you are free to cut wherever you’d like. If you feel it snag at the seam, make sure to cut here.

How to make pants fit better?

Iron the elastic. With the damp cloth on top of your elastic band and your iron on the highest setting, iron over it. Iron for 10 seconds and then let sit for 10 seconds. Continue doing so for 5-10 minutes. This will help your pants fit because as the elastic heats, it will heightens the breaking weight.

How to make your pants longer?

Prepare your pants. You can either pin each side of your pants to the ironing board—stretched to the desired length. Or, you can simply slide the pants around the ironing board until they are the proper width. ...

How to remove elastic band from clothes?

Put a small slit on the inside of you clothing. To remove the elastic band from your clothing, make a slit (around ½”). If the elastic is sewn into the seam, you’ll have to cut the seam the size of the elastic.

What to do with wet socks?

Stretch the wet socks over a pool noodle, wine bottle, or whatever is a little larger than the tight socks around your leg.

How to get rid of a swollen ear?

Turn on the iron and dampen a cloth. You want your iron on and set to the highest setting. Run a face cloth or hand towel under water until it is damp, but not soaked.