What is the best to put on tongue and groove?
How to install a Tongue and Groove ceiling
- Determine which direction your ceiling joists are going. You’ll need to install your material perpendicularly so that each board intersects multiple ceiling joists for attachment.
- Measure and cut your boards. Measure the length your boards need to go, and cut them to around a ½” less than the width of the room.
- Find the studs. ...
- Install your first board. ...
How to build wood retaining wall with tongue and groove?
- Use a taut string and stakes or a snapped chalk line to help you create a straight line.
- If you need to extend your wall with another post to create the final 3 feet (0.91 m) then do so.
- Space your posts 16 to 18 inches (41 to 46 cm) apart for load-bearing walls, which are walls that support something aside from their own weight such as a roof.
Can you put tongue and groove on to concrete floor?
Unlike hardwood flooring, engineered flooring can be installed over concrete or existing flooring, such as tile or linoleum. Although tongue and groove solid hardwood flooring does fit together, it must still be nailed to a subfloor.
How can I make my tongue longer and stretch?
“Assume a kneeling position, keep your palms over the knees and gently lean over the hands. Now protrude the tongue as far as possible by contracting the throat muscles, meanwhile rolling your eyeballs upward. During this position exhale the breath as much as possible.
How do you attach tongue-and-groove?
5:049:30Tongue and Groove Ceiling Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipFace nail the first board and then you're ready to nail into the tongue for the remainder applyingMoreFace nail the first board and then you're ready to nail into the tongue for the remainder applying adhesive as you. Go.
How do I secure my tongue-and-groove to the wall?
1:548:23Tongue and Groove Accent Wall - Part 4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto a tongue which is what I've been doing. I'm actually just gonna nail it right on the face ofMoreInto a tongue which is what I've been doing. I'm actually just gonna nail it right on the face of the board.
How do you install tongue-and-groove on drywall?
0:1712:21How to Install Tongue and Groove Ceiling Cladding - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a fairly thin material. So this is about a quarter inch thick which if you're going to beMoreIt's a fairly thin material. So this is about a quarter inch thick which if you're going to be putting it over an existing finish on your ceiling such as drywall.
Do you start at top or bottom for tongue-and-groove?
Start at one bottom corner of your wall and make sure that your first board is level by using a hand level or a laser level. The tongue of the board should be facing up towards the ceiling while the groove faces down towards the floor.
Should you glue tongue and groove?
The recommended glue for floating installation is Tongue and Groove engineered flooring glue. Glue placement is very important. The glue must be placed along the topside of the groove the full length of the grooved side and end.
What kind of nails do you use for tongue and groove?
We recommend using 16- or 18-gauge finish or brad nails. 1-½” to 2” in length should be sufficient. Both gauges are strong enough to hold the lumber securely, but small enough as to not leave a large hole on the face of the board. Go ahead and buy the bulk pack: you're going to need it!
Can you nail tongue and groove to drywall?
If you're looking to reboot the atmosphere in a living room or bedroom by covering the existing drywall with tongue-and-groove boards, the good news is that there are no codes prohibiting it. In fact, the fire-resistance of drywall balances the propensity of wood to burn and makes the room safer than wood alone.
Do you need drywall under tongue and groove?
Drywall will help with some types of sound, like people talking or a radio playing, but it won't help much with footfalls and people walking around. If you want to get the most bang for your buck, 5/8" type X drywall and safe and sound mineral wool will help, and stop most normal talking from being heard.
Is tongue and groove cheaper than drywall?
Tongue and Groove Ceiling Pros and Cons It's stunning, looks customized to the space, and looks more expensive than a drywall ceiling (it is pricier, too). If done right, it can increase the value of your home.
Should tongue and groove be vertical or horizontal?
Vertical vs. Since tongue and groove are better at keeping out the elements, it can be installed either vertical or horizontal. While a great deal of paneling is installed vertical, a horizontal paneling design along a wall can make it appear longer.
Where do you nail tongue and groove ceiling?
Drive the nails through the shoulder of the tongues into the framing at about a 45-degree angle. The next grooved edge will hide the nail holes. A 15- or 16-gauge brad nailer with 2-in. nails is the best choice for fastening, although an 18-gauge nailer will do the job, too.
How do you fasten tongue and groove pine boards?
Fasten each board using a 2” 15 gauge nail on each joist. On the cut side, nail it 1/2” from the edge to prevent splitting the wood. On the tongue side, nail it through the tongue at an angle so the next row covers the nail.
Choose Your Preferred Finish
Before you even get started with your wood paneling installation project, you’ll need to choose the right material and finish for the look that you want. Rustic tongue and groove paneling for walls is great if you want a classic looking room, but there are plenty of other prefinished panels available in pine and cedar.
Start Assembling Your Wall
Our tongue and groove wood paneling for walls and ceilings goes beyond top and bottom matched pieces because we also end match all of our paneling. This means that you won’t need to worry about lining up each individual piece to your wall stud/rafters pattern.
Installing a Tongue and Groove Ceiling
Once you’ve installed your tongue and groove wall paneling, you can move on to the ceiling. The process here is almost exactly the same. You’ll start from one corner. And use existing studs/rafters to mount each piece of paneling.
Finishing
You won’t need to worry about any rough end cuts between the walls or ceiling because you’ll be able to finish off the job with matching molding from The Woodworker’s Shoppe. You can use molding along every corner edge of the walls, floors, and ceilings, as well as around doors, windows, and power outlets or light fixtures.
