- 1. Measure the Windshield Determine whether to mount the motor below or above the windshield, and how far from the windshield. ...
- 2. Identify the Wires The wires emanating from the wiper motor are all white. ...
- 3. Align Wiper Arm ...
- 4. Secure the Plate ...
- 5. Install the Motor Shaft ...
- 6. Mount the Fluid Canister
- Measure the Windshield. Determine whether to mount the motor below or above the windshield, and how far from the windshield. ...
- Identify the Wires. The wires emanating from the wiper motor are all white. ...
- Align Wiper Arm. ...
- Secure the Plate. ...
- Install the Motor Shaft. ...
- Mount the Fluid Canister.
How to drill a hole in a boat windshield?
What color wires are on a wiper motor?
How to measure windshield thickness?
How many nuts are on a boat motor?
See 1 more
About this website
How do you take windshield wipers off a boat?
Spray the arm/wiper joint with PB Blaster, let soak, then take a small flat screwdriver, insert under the wiper and pry up while at the same time pulling away from the motor shaft.
Do boats have window wipers?
Windshield wipers are an integral piece of safety equipment on many powerboats and yachts.
How do you remove a marine wiper arm?
0:351:33How to Remove a Wiper Blade Arm when it's Seized on. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe wiper blade arm is usually seized on so you'll need a puller to remove it the easiest and safestMoreThe wiper blade arm is usually seized on so you'll need a puller to remove it the easiest and safest way of removing a wiper blade arm is user puller like this this gets below the wiper blade arm.
What is a pantograph arm?
Pantograph wiper arms are typically used on windshields that are taller than they are wide — like tugs, fishing vessels, transit buses, etc. They have two parallel struts and move the wiper blade from side to side. They are structurally strong - to handle large wiper blades, and require larger, more powerful motors.
What is the round thing on boat windows?
A clear view screen or clearview screen is a glass disk mounted in a window that rotates to disperse rain, spray, and snow.
What are the circular windows on ships?
portholeA porthole, sometimes called bull's-eye window or bull's-eye, is a generally circular window used on the hull of ships to admit light and air.
How do you remove a rear wiper arm?
2:394:05How to replace a rear window wiper arm and blade on your car, truck or ...YouTubeStart of suggested clipEnd of suggested clipSuper easy you tilt it and it pops right.MoreSuper easy you tilt it and it pops right.
How do you remove HQ wiper arms?
0:563:07simple classic GM wiper arm removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull it out with the wiper arm lip raised. We should let you slide this little clip up it'll popMoreAnd pull it out with the wiper arm lip raised. We should let you slide this little clip up it'll pop out far enough that it will catch the bottom of the catch.
How do you fix a seized windshield wiper spindle?
0:273:01How to Repair Seized Wiper Spindles - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the spindle by gently working it backwards and forwards at the same time pulling it out ifMoreRemove the spindle by gently working it backwards and forwards at the same time pulling it out if it's very seized you may have to use some penetrating oil working it back some forwards a few times.
What has replaced the pantograph?
Pantographs are no longer commonly used in modern engraving, with computerized laser and rotary engraving taking favor.
What does Pantographic mean?
1. An instrument for copying a plane figure to a desired scale, consisting of styluses for tracing and copying mounted on four jointed rods in the form of a parallelogram with extended sides.
What is a Pantagraph used for?
Pantographs are used for reducing or enlarging engineering drawings and maps and for guiding cutting tools over complex paths. Artists specializing in miniatures use pantographs to achieve greater detail. From the 16th century onward, the speed of a ship was measured by what English invention?
How do you remove early Bronco wiper arms?
0:051:24How to Remove Wiper Arms | Bronco OBS F150 F250 F350 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's going to stay connected to the pivot arm. Next release the wiper arm so it rests on the clip.MoreIt's going to stay connected to the pivot arm. Next release the wiper arm so it rests on the clip. At this time you can gently grab the wiper arm and just push. And it should release off the pivot.
How do you remove the wiper arms on a 1967 Mustang?
6:3813:04Episode 67 Mustang Intermittent wipers, wiper tools, removal of ...YouTubeStart of suggested clipEnd of suggested clipWith the arm under a towel and take the flat blade screwdriver. And push up on the arm flat acrossMoreWith the arm under a towel and take the flat blade screwdriver. And push up on the arm flat across the base. The arm will pop off. Now that's why you want to have the towel on the arm.
Windshield wiper wiring | Downeast Boat Forum
Joined Aug 6, 2013 Posts 6,756 Likes 2,657 Location Southwestern CT First Name Ben Boat Make 1998 36' Sabre Express CAT 3116TA's, 2015 ROS Scotia 16 Etec 50
Wiring a wiper motor?? | Boating Forum - iboats Boating Forums
First post. Great board and I hope y'all can help. I rewired my instrument panel and switches. Problem is, I'm having a hell of a time figuring out how to wire the wiper to my new switch. The only logical wire (to me) to hook up is a white one (which is actually BLACK at the wiper motor)...
How to Install a Windshield Wiper System on your Boat
Windshield wipers are an integral piece of safety equipment on many powerboats and yachts. While many boaters don’t ever plan to go out on rainy or stormy days, we all know conditions on the water can change in a hurry, and it’s always best to be prepared. In this article, we’ll take a look at the components of a wiper system, and the process to install them.
Wiper Motors
The vast majority of wiper motors on recreational boats are installed inside the boat, and have shafts that penetrate the bulkhead either above or below the glass.
Wiper Arms
Depending on the brand and style, the wiper arm will attach to the motor drive shaft in different ways, but it’s typically a straightforward process.
Wiper Blades
Wiper blades, like arms, also have different attachment styles to the wiper arms, but all styles are simple to install.
Control Switch or Panel
For controlling your wiper system there are lots of options ranging from simple on/off switches to multi-wiper electronic control panels and everything in between. Determining which wiper control is best for you comes down to how many wiper motors you have, and how you will use your wipers.
Washing System (Optional)
When installing a wiper system, you may also choose to add a washing system that will spray down the windshield as you wipe. Washing systems are most commonly used on boats that get salt water on the glass and the washing jet simply sprays fresh water to eliminate any caked-on salt.
Why are boat wipers important?
New Arrivals. Good visibility is the key for safeguarding security and avoiding collisions during your boat cruises. Properly working boat wipers help maintain a clear view of the sea ahead, therefore making operation of your boat a lot easier and safer, and allowing your passengers to get more enjoyment from the voyage.
What is a W38?
W38 25" - 35" Stainless Steel Pantograph Wiper Arm by Roca® . This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship....
Where do I mount a windshield wiper motor?
Where do I mount the windshield wiper motor? Wiper motors are usually installed either directly above or below the window, and equipment is available to mount the motor on the interior or the exterior, depending on the application. The location chosen often depends on which is the best position to mount the wiper motor to clean the section ...
How much does a marine windshield wiper system cost?
The cost of your next marine wiper system will depend on the size and sophistication of the system you would like to install. If you were happy with your current system until it failed, you may have a simpler installation than if you are looking for something new, although you should consider that the failure of an existing system may indicate that a more robust system is needed. We dive into this topic in depth in: How Much Do Marine Windlshield Wipers Cost?
How big is your boat’s window?
Whether it is called a windshield, windscreen, or window, the key factor in choosing a wiper system for your boat is the size and shape of the glass to be cleaned. On many new boats, areas of glass are growing steadily larger. If you haven’t done so already, break out your tape measure and map out the shape of the glass as well as its dimensions.
What should I look for in a wiper washing system?
More and more wiper installations are being fitted with washing systems to help clear the glass from salt spray, pollen, and obstructions. Systems can be adapted to run with pressurized water or be plumbed to a stand-alone reservoir with a simple DC pump.
What is the best way to make a taller windshield?
The best solution for taller and broader windshields is a larger wiper system capable of driving those longer wiper arms and blades. As a result, each wiper system is sized based on ...
How much does a wiper system cost?
The bottom line is that most wiper systems are purchased and installed for somewhere between $250 to $2000. If your installation is simple, perhaps you can save money by doing it yourself. Likewise, if your use is occasional, you may come in toward the lower end of that range. Wiper systems that require higher-powered motors and will be used more frequently will creep into the upper half of that range. Either way, we recommend that you speak with a dealer or installer who is already experienced with marine wipers.
What is marine wiper control?
Like today’s automobile wiper systems, marine wiper control systems now offer a long list of features to make your experience more enjoyable and trouble-free. Many wiper systems feature two-speed motors with low and high speeds, and the controls take advantage of these two continuous speeds, as well as intermittent wiper operation.
How to remove old windshield wipers?
To remove the old windshield wiper, pull it away from the window to an upright position. Then, hold the wiper in place with one hand and use the other hand to click the small tab under the wiper (where it meets the metal arm). The wiper should unclick, and then the next step is finding the right level.
How long does it take to install windshield wipers?
Installing new windshield wipers is crazy easy. Once you know what to do, it can take a matter of minutes.
How to tell if new windshield wipers are level?
Thus, you will need patience and a keen eye for balance for this step. On the side where the wiper attaches back onto the metal arm, click the curved part of the new windshield wiper so that it is pointing away from the wiper blade. Holding the wiper blade upside down, you will be able to see if the new wiper is in line with the curve in the arm.
How to drill a hole in a boat windshield?
Set the wiper arm on the windshield, aligning it with the estimated location of the motor shaft. Adjust so that there’s room for the blade to sweep between the windshield edges to determine the exact shaft location. Mark the spot. Drill the hole, holding the drill at 90 degrees to the surface of the frame or deck. Boating Magazine
What color wires are on a wiper motor?
The wires emanating from the wiper motor are all white. You'll note little yellow tabs on them that identify each wire's purpose. Familiarize yourself with these. For good measure, I suggest you attach color cable ties to them and note the colors on the supplied wiring diagram.
How to measure windshield thickness?
1. Measure the Windshield. Determine whether to mount the motor below or above the windshield, and how far from the windshield. If penetrating a deck, windshield frame or bulkhead, you'll need to measure its thickness. Downloading Imtra's self-explanatory "windshield wiper questionnaire" will make this easy. Boating Magazine.
How many nuts are on a boat motor?
There are two nuts and two washers on the motor shaft. Three of them fasten the motor (a rubber washer goes on first, followed by a metal washer cover and a securing nut). The big rubber washer stays inside with the motor. Get the order correct, lest you suffer excess vibration in use. Boating Magazine. 6.
