- If the dial to its right has passed 0, then use the number the needle is hovering over. If it has not passed 0, then still use the smaller number.
- For example, the needle on a dial may hover over the number 3. Check that the dial to the right to see if it’s passed 0. If it did, use the 3. ...
How do I read a propane gas meter?
Just multiply the tank's capacity by the reading on the tank gauge. For example, if your 500-gallon tank is showing a gauge reading of 60%, that means you have 300 gallons of gas remaining in your tank (500 x 0.6).
How can I tell how much propane is left?
Most propane tanks weigh around 18 1/2 pounds when they are empty. Place your tank on a household scale and subtract 18 1/2 from that number. From there, you can determine how much you have left.
What do the numbers on my propane tank mean?
Most propane grill tanks come with two numbers stamped on the handle – the water capacity (“WC”) and “Tare Weight” (TW – the weight of the tank when it's empty). Most grilling tanks weigh about 17 pounds when empty and hold about 20 pounds of gas.
What percentage is a propane tank empty?
Most gauges usually read from 0 to about 90 percent (see why 90 percent and not 100 percent below). A gauge reading of 10 means that the tank is 10 percent full (almost empty). We recommend that you call for delivery if your tank reads no less than 25 percent to avoid a propane run-out.
How long will 25 percent propane last?
This number can then be used to calculate greater use of propane appliances: 25 percent capacity for 6 hours = 3.6 gallons per day. 50 percent capacity for 2 hours = 2.4 gallons per day.
What happens if your propane tank goes below 20 %?
What Happens if I Let the Propane Gauge Go Below 20% If your propane tank gauge is at 20%, don't panic. While this does indicate that it's time to reorder, you likely have a few days of propane left. Be sure to call and schedule propane delivery with your propane supplier to avoid running out.
How do I know how many gallons my propane tank is?
0:502:38How Big Is My Propane Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a 200 pound or 57 gallon propane tank. It's 43 inches tall in 24 inches in diameter it holdsMoreThis is a 200 pound or 57 gallon propane tank. It's 43 inches tall in 24 inches in diameter it holds approximately 48 gallons of propane.
How can you tell how many gallons your propane tank holds?
A standard-sized propane tank is 20 lbs (9.07 kg) when filled fully. Put your tank on the scale for total weight, and then subtract your empty weight to determine how much propane is left in your tank.
What does 11 WC mean for propane?
What is WC Pressure? WC stands for Water Column and is measured in inches. It is a measurement of pressure under 1 PSI. Most gas companies deliver gas to your home at 11" WC. 27.7" WC is equal to 1 PSI.
What does 240 mean on propane tank?
Each gas cylinder will have a water capacity number stamped on the collar and will look something like “WC 240.” This is the total mass of liquid – stated in pounds – that a cylinder could hold if filled entirely with water.
How to record odometer reading?
In addition to the odometer readout, your meter may also incorporate one or two clock dial indicators as shown . These indicators do not need to be recorded with your reading submission.
How many dials does a dial meter have?
These indicators do not need to be recorded with your reading submission. If you have an dial style meter like the one shown here, it will have four to six clock-type dials. Be sure to read the dials from left to right. If the dial hand is not directly on a number, record the lower number.
What to do if the dial hand is not directly on a number?
If the dial hand is not directly on a number, record the lower number. In the example, dial B reads `9` and dial D reads `2`. When a hand is directly on a number, always check the dial to the right. If the hand on the right is NOT ON OR PAST ZERO, record the preceding number.
What is a dome on a propane tank?
The dome on your propane tank is designed to protect several important components. These include a fill valve, a tank shut-off valve, a safety relief valve, a regulator, and a tank gauge.
Can you live with propane?
How to. Living With Propane. Propane has been a part of our nation’s energy mix for more than a century now. And whether you use it for space heating, grain drying, or as a forklift fuel, you’ve no doubt recognized the many benefits of this clean-burning, cost-effective energy source. Despite propane’s many uses across a number ...
How many dials are there in a meter?
Recognize that each dial represents a number in a 4- to 5- digit reading. Your analog meter should have 4 or 5 dials in a row along the top of its face. Together, they produce a 4- or 5- digit reading. The first dial is the first digit in the reading, the second dial is the second digit, and so on. [1]
How many decimal points are in a metric meter?
If you have a metrical meter, you should see m3 for cubic meters. The meter will likely have 5 digits, as well as 3 decimal points.
What is the unit of measurement for a meter?
Determine if the reading is in imperial or metrical units. If you live in the United States, your meter will likely be in imperial units, such as cubic feet. If you live in an area that uses the metric system, however, you’ll likely see metric units, such as cubic meters.
How to find out how much gas you use?
Subtract last month’s reading from this month’s to get your usage. When in doubt, subtract the biggest number from the smallest number. Use a calculator or subtract it by hand. This will tell you how much gas you used this month!
How often does a gas company check your meter?
Your gas company will take 1 reading a month, usually around the same time. To estimate your usage, you need to do the same thing. Look at your gas bill to see what day the gas company usually checks your meter, though it can vary month-to-month. Checking it on the same day will give you the most accurate reading.
How to read a digital meter?
Look for the digital screen that displays the reading. Digital meters are super easy to use because they give you an exact reading. All you have to do is look at the screen! The reading should be a 4- or 5-digit number, but you may see a few 0s in front of it. Just disregard the 0s.
What to do if you get a different gas bill?
If you get a different reading from your bill, call your gas company to make sure the reading is correct.
