how do you refinish a rattan chair

^{How to Refinish Rattan Furniture}

• Step One: Scrub clean Using your cleaner & toothbrush, give the rattan a good scrub. ...
• Step two: Tape off if needed If needed, this is when you will tape off anywhere you don’t want the natural rattan color to go. ...
• Step Six: Enjoy!

How do you replace a piece of rattan furniture?

In some cases, a small amount of replacement rattan is needed to replace missing bits. Take a small piece of the old material with you to a craft store to ensure you purchase the same type and size of replacement fiber. Weave the new material through the hole in the furniture, following the existing weave pattern.

How do you fix a sagging rattan chair?

If it is a chair back that sags, prop the chair so the sagging area is horizontal. Soak a towel in water and wring most of the water out. Place the towel over the affected rattan, ensuring that it does not touch the furniture frame, to avoid damage.

Can you spray paint a rattan chair?

Prior to painting I applied a little wood glue to the back of the rattan so it wouldn’t move once painted. My original plan was to spray prime the crevices and brush the rest, but soon realized that the entire chair needed to be sprayed. It is way too much curved surface area to brush!!

What do you fill holes in rattan chairs with?

Next we filled all of the holes with wood filler. These chairs had obviously lived with a pet or small child since the rattan x’s had bite marks on it (yikes! Didn’t see that before purchasing …) so I filled those too.

Can rattan furniture be refinished?

Painted rattan can be treated the same way, but if many spots require attention, you may have to repaint the piece to camouflage the touch-ups. To refinish or repaint rattan, first clean it thoroughly.

How do I make my rattan look new again?

First of all start by cleaning the set.Scrub in the crevices with a soft brush and vacuum with the brush attachment.Make up a solution of washing-up liquid and tepid water.Stir vigorously to make a lot of suds.Dip a soft clean cloth in the suds.Gently wipe the furniture without getting it too wet.More items...•

How do you sand and refinish a rattan?

A Step-By-Step Guide To Sanding Your Rattan FurnitureRemove Dust And Dirt. Remove any cushions or blankets so you're left with the rattan furniture only. ... Clean The Piece. Use a bucket of soapy, warm water and a cloth to wipe the furniture. ... Let The Piece Dry. ... Sand Your Rattan Furniture. ... Apply Your Paint, Lacquer, Or Stain.

Can weathered rattan be restored?

Faded or damaged areas on a rattan piece are unsightly, but you can spot-repair them with care -- or entrust them to a rattan specialist for more complex restoration. Stained rattan that has developed scraped or bare spots may be rubbed gently with shoe polish to blend in a small bit of new stain.

How do I update old rattan furniture?

3:1513:53HOW TO UPDATE WICKER FURNITURE- More tips and tricks ...YouTubeStart of suggested clipEnd of suggested clipAnd it's a little bit like a furniture polish and wax that's a little bit colored all in one it kindMoreAnd it's a little bit like a furniture polish and wax that's a little bit colored all in one it kind of just updates it in one step if it's not if it's not in really bad shape.

What oil is best for rattan?

Once dry, dip a clean, soft cloth into boiled linseed oil to condition the rattan. Starting at the top of the piece of furniture to prevent drips, wipe down the rattan with the oil. The oil will add moisture to the fibers to help prevent breakage.

Can rattan be sanded down?

With rattan, I recommend sanding very gently by hand. I fold up a sheet of sandpaper and scuff sand. No need to remove the original color for this technique!

Can you strip rattan furniture?

What to do? First, you should never strip wicker -- natural or man-made. Real wicker, made of rattan stalks, cane and reed, can take the chemicals that remove paint but will not stand up well to the scraping, scrubbing and other abrasion required to remove the softened paint.

Can rattan be varnished?

You'll probably need one can per coat for an average-size rattan chair and double that for a sofa. Work in a well-ventilated area and wear a respirator. Spray a thin coat of exterior varnish, which is the best finish for cane furniture, over the whole piece. Let it dry and apply another coat.

What's the difference between wicker and rattan?

“The difference is that rattan is a material, whereas wicker is the style and method of weaving,” Zoe explains. “Wicker can be woven from rattan as well as many other natural or synthetic materials, which is where the confusion often lies.”

How do you clean an old rattan?

Steps to Clean the Rattan:Fill a bowl with water. ... Dip a soft cloth into the bubbles only, not into the water.Wipe the rattan with the bubbles. ... Use a toothbrush or other soft brush to clean in the cracks and crevices, using the same suds-only cleaning method.Repeat weekly for best results.More items...

How do you revive a faded plastic rattan?

RESTORE FADED PLASTIC FURNITURE First step is to clean any debris, cobwebs or general muck from the plastic furniture's surface. Secondly, use a suitable plastic restorer and spray it onto the plastic furniture, rubbing it in with a clean, dry cloth. You will find this restores the faded plastic back to new!

How do you clean and repair a rattan?

Use a toothbrush or other soft brush to clean in the cracks and crevices, using the same suds-only cleaning method. Repeat weekly for best results. To restore dry, cracked, or split rattan, apply boiled linseed oil with a brush. When the furniture won't absorb any more oil, wipe it clean with a soft cloth.

How do you restore sun faded wicker furniture?

How to Refresh Dried-Out WickerVacuum the wicker thoroughly using a bristle attachment. ... Mix water with a mild detergent. ... Mix 1/4 cup of bleach in 4 cups of water. ... Place the furniture in a well-ventilated area, preferably outdoors on a sunny, breezy day.More items...

How do you fix frayed rattan furniture?

Step One: Scrub clean. Using your soap and brush, give the rattan a good scrub. ... Step Two: Clip Off Broken/Damaged Rattan. Using your scissors or wire cutters, trim away any damaged or broken rattan. ... Step Three: Choose and Soak. ... Step Four: Measure and Cut. ... Step Five: Tuck and Glue. ... Step Six: Paint (optional)

How to spray finish furniture?

Spray it evenly over the surface of the furniture, starting at the top and working your way down on each side. Keep the nozzle about a foot from the piece, and keep it moving. Make it a very light, thin layer, with no drips.

What is rattan furniture?

Rattan furniture is similar to wicker but uses thicker, heavier cords of wood to form the shape of the piece. Rattan furniture is generally either painted or glossed (with varnish or polyurethane) to protect the wood from wear and moisture.

How to clean a wood table with soap?

Step 1. Fill a gallon bucket with warm water and a dab of dish soap. Scrub down the entire piece of furniture, allowing the water to soak into the fibers of the wood. Rinse the piece very well with clean, warm water . Let it dry thoroughly for several days, preferably in the sun.

How long does it take for a coat of varnish to dry?

Let the first coat dry to the touch (about an hour). Apply a second coat in the same manner. Again, keep it very thin and even, working your way gradually around the whole piece and getting varnish into all the crevices.

STAY CONNECTED

Find out what's new from Wagner including product news, exclusive email offers, promotions and more.

How to Refinish Rattan Furniture

How to update and refinish bamboo and rattan furniture by using a Wagner FLEXiO 4000 paint sprayer.

Prep furniture and set up spray tent

Prepare bamboo and rattan furniture pieces for painting by cleaning with a degreaser and then wiping clean with a wet cloth. Sand lightly to remove any peeling paint and to rough the surface for painting. Use a tack cloth to remove any dust and debris.

Adjust control and pressure controls

Adjust the material flow control and the air pressure and make a few test sprays on a piece of cardboard or paper before painting the furniture.

Apply paint

Apply two coats of paint to the bamboo and rattan furnishings, allowing to dry completely between coats. You may find it helpful to turn the furniture upside down to ensure paint coverage on all surfaces and angles.

More info

Enjoy your "new" furniture! This sponsored post was created by Atta Girl Says. Head to the blog for the full post and details.

How to restore rattan furniture?

To restore rattan that has been neglected, rub just the suds from a gentle cleaner or oil soap swished in water on the furniture with a soft cloth. Use only the suds to avoid damaging and splitting the fiber by wetting it.

How to clean rattan joints?

A soft toothbrush works well to dislodge any dirt or dust trapped in the joints and creases of curved areas. Dust the cleaned rattan at least weekly, and keep it from drying out with occasional rubbings of good quality lemon oil.

Where does rattan come from?

Rattan, a grass in the palm family, grows in the tropical secondary growth forests of Africa and Asia. Most rattan used in furniture comes from Indonesia, although its increasing scarcity means new, quality rattan items may be hard to find. That makes the vintage pieces worth restoring. Rattan is very durable, but can become worn like any older ...

Can you strip rattan?

Do not strip rattan like old wood furniture; the fibers would be damaged and splintered by stripping. Instead, a rattan crafter will blend new areas of stain to create a seamless, harmonious new finish that mimics or deepens the original hue.

Can you spot repair rattan?

Faded or damaged areas on a rattan piece are unsightly, but you can spot-repair them with care -- or entrust them to a rattan specialist for more complex restoration. Stained rattan that has developed scraped or bare spots may be rubbed gently with shoe polish to blend in a small bit of new stain.

Can you refinish a rattan chair?

Rattan is very durable, but can become worn like any older furniture. If you have a damaged or dingy rattan chair, table or chest, there are specific ways to refinish it for years of functional and decorative use.

How to get rid of dingy spots on rattan?

If the rattan has been neglected, mix some gentle cleaner in water, then apply the suds to the dingy spots using either a soft cloth or a toothbrush. Avoid getting the rattan excessively wet, as that can damage the material as well as the cane wrapping that holds it together.

Can you take vintage rattan furniture home?

Vintage rattan furniture is getting harder to come by, so if you happen to run across a nice piece at a garage sale, you might want to snap it up and take it home for restoration.

Can you strip rattan wood?

Also avoid stripping the rattan, as you would do with wood; that, too, would likely cause damage. Instead, if some of the finish has been worn bare, you can work with an experienced restorer to create a custom stain that’ll return the piece to its original warm hue.

How to fix a chair back that sags?

Flip the furniture over so the sagging area sticks up. If it is a chair back that sags, prop the chair so the sagging area is horizontal.

What is rattan furniture?

Image Credit: okan dilek/iStock/Getty Images. Rattan furniture offers a natural beauty that lasts for decades or even generations, with proper care. Rattans are palm species that grow not like trees but along other vegetation like vines. Their fibers are separated and dried into a pliable, durable material suitable for weaving into objects such as ...

How long does it take for rattan to dry?

Allow the towel to dry out in place overnight. Remove the towel and allow the furniture to air-dry for several days before using it. Wet rattan fibers shrink tight as they dry, which tightens up saggy situations.

How to clean a soiled couch?

Wipe the furniture down with a scrub brush dipped into a bucket containing equal parts bleach and water. Wear rubber gloves and eye protection while working with the bleach. Use a toothbrush or cotton swab to reach into deep crevices.

How to replace rattan bits?

In some cases, a small amount of replacement rattan is needed to replace missing bits. Take a small piece of the old material with you to a craft store to ensure you purchase the same type and size of replacement fiber. Weave the new material through the hole in the furniture, following the existing weave pattern. Tuck loose ends in to secure the patch.

Can rattan be damp?

Leaving rattan furniture exposed to the elements wreaks havoc on it -- too dry and the rattan may become brittle and crack or split; too damp and it may stretch and become misshapen. Moisture may cause mold or mildew to grow on the furniture, which requires cleaning with bleach to remove. Advertisement.