Refinishing Ideas for Wood Hutches
- Give It Warm Stain. If you want to play up the look of the wood, staining your is an ideal refinishing option. ...
- Get Colorful. Paint is another option for refinishing your wood hutch, especially if you want to want to make a bold statement.
- Go Country. If your dining room or living room features country decor, you may want to refinish your hutch with a faux finish that imparts some old-fashioned charm.
- Try Shabby Chic. If you prefer a shabby chic look for your dining room or living room, you can use a faux finish to give your hutch a worn, vintage ...
How to refinish wood furniture?
Below are six essential steps that address how to refinish wood furniture and how to strip finished wood: Step 1: Clean the Piece The most fundamental step of any furniture refinishing or renewing project is to give the piece in question a good and thorough clean.
How do you fix a chipped finish on wood furniture?
This method allows you to keep the finish but use special products to fix up the piece. Refinish: Using a finish-stripping product or power sander, you can remove the current finish, make any necessary repairs and touch-ups and then apply new finish.
How to repair dents and cracks in wood furniture?
This is the simplest method, and it works on wooden furniture that’s still in good condition. Repair: Without stripping the finish, you can repair dents and cracks by touching up certain worn-out areas. This method allows you to keep the finish but use special products to fix up the piece.
How do you use mineral spirits to refinish wood?
You can wipe on the mineral spirits over a patch of the wood and wait for it to saturate. This will reveal how the finish will look if you skip the refinishing steps and just apply a clear coat.
How do you refinish an old wooden hutch?
Choose A Paint Color. ... Determine What Type Of Paint Is Best. ... Remove The Hardware. ... Sand The Hutch. ... Give Your Hutch A Coat Of Primer. ... Paint Corners And Details With A Brush First. ... Go Over Larger, Flat Areas With A Foam Roller. ... Repeat To Apply More Coats.More items...
How do I make old hutch look modern?
You can beadboard, wallpaper, stencil, or just paint the back of the hutch a different color. Just this one update alone can do a lot to freshen up an outdated hutch or bookcase. 2. Change out the items you have displayed in your hutch.
How do you refinish a china hutch?
How to Refinish a Wood China CabinetRemove the doors, shelving and from the china cabinet. ... Clean the wood with mineral spirits or trisodium phosphate (TSP). ... Sand the wood very lightly, going with the grain. ... Wipe off the wood with a dry cloth to remove the dust. ... Stain the cabinets. ... Install all of the hardware.
How do you sand and paint a hutch?
11:5717:23$50 Rustic Farmhouse Hutch Makeover! Rustoleum Chalk PaintYouTubeStart of suggested clipEnd of suggested clipSo just adding it with a little bit of sandpaper. Starts that look and gives it kind of that rusticMoreSo just adding it with a little bit of sandpaper. Starts that look and gives it kind of that rustic farmhouse appeal that seems to be very popular. Now i finished sanding.
How do you paint a hutch without sanding?
5 Methods for Painting Furniture Without Sanding:MINERAL PAINT (My Favorite Option) With Mineral paint you don't need to prime anything beforehand. ... CHALK PAINT. Chalk paint is the best way to paint practically anything without sanding. ... MILK PAINT + BONDING AGENT. ... BONDING PRIMER. ... LIQUID DEGLOSSER.
What can I do with my old hutch?
The top of a china hutch can also be repurposed into a stand-alone cabinet simply by adding legs. Repurpose it into a curio cabinet or a one of a kind bookcase! Getting rid of the bulky weight of entire china cabinet on a wall will give the illusion that you have more space.
How much does it cost to refinish a china cabinet?
between $500 and $3,500A china cabinet or armoire costs between $500 and $3,500 to refinish. These pieces are among the most complex constructions of furniture in your home and will require more labor hours.
Do you have to sand a hutch before painting?
DO sand the furniture before applying the paint. Furniture comes in a variety of materials and nearly all will require some level of sanding to make sure paint adheres to the surface, since it removes any imperfections or dimples.
How do you refinish a painted hutch?
0:1110:50How to Paint over Previously Painted Furniture | AJ's Vintage DesignsYouTubeStart of suggested clipEnd of suggested clipYou can just paint right over it it's just paint. And that's what's fabulous about the Dixie bloodMoreYou can just paint right over it it's just paint. And that's what's fabulous about the Dixie blood products is it's got great coverage. And I painted all this this is Dixie ball paint.
How do you paint a stained hutch?
1:597:19DIY Chalk Paint Hutch Makeover! - YouTubeYouTubeStart of suggested clipEnd of suggested clipI really try my best to make sure that all the services were nice and smooth. Then I wipe down theMoreI really try my best to make sure that all the services were nice and smooth. Then I wipe down the whole hutch with mineral spirits now I heard that this prevents any bleeding from the stain
How do you redo a hutch?
0:2819:06Vintage Hutch Makeover | Stripping and Refinishing an Old SecretaryYouTubeStart of suggested clipEnd of suggested clipBut also one of the most important aspects of a furniture makeover like this the more prep work youMoreBut also one of the most important aspects of a furniture makeover like this the more prep work you do the better your end result will come out. So i'm removing all of the drawers.
How do you update a kitchen hutch?
2:0210:4610 Kitchen Hutch Makeover Ideas - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart with wiping down the entire piece of the unit. And sanding it paint it a creamy white and sealMoreStart with wiping down the entire piece of the unit. And sanding it paint it a creamy white and seal it off for light coats using polyacrylic for protection 8.
How do I make my hutch look rustic?
2:376:33A Traditional Hutch Gets A Farm House Look | Hutch MakeoverYouTubeStart of suggested clipEnd of suggested clipWe're ready for toss paint we're using fairy chalk mother and ivory you can get that at Jamie rateMoreWe're ready for toss paint we're using fairy chalk mother and ivory you can get that at Jamie rate vintage Calm. It's nice because it adheres really well and is a long-lasting finish.
What Colours can you get in chalk paint?
12 Pretty Chalk Paint Colors and How to Use Them of 12. Sage Green. ... of 12. Pale Pink. ... of 12. Cobalt Blue. ... of 12. Deep Red. ... of 12. Slate Grey. ... of 12. Forest Green. ... of 12. Light Gray. ... of 12. Sunny Yellow.More items...•
How to apply Purdy stain?
I opened the stain and stirred it well with a paint stick. Then I used my Purdy natural bristle brush to apply it. Because it is a stain with a poly built in, it is a little bit thick and sticky. It is really important to keep a “wet edge,” which basically means to make sure you’re not dragging a dry brush across the surface. This will ensure that the stain goes on evenly. Also though, make sure you do not put this on too thick! You need to put on a very light coat, but make sure you keep a wet edge the whole time. It takes a bit of practice to get the right amount of stain on your brush.
Can you use polyshade over varnish?
Hi Theresa! Unfortunately, PolyShades is not recommended for use over a finish that softens or gets sticky when you put nail polish remover on it (this means it’s a varnish or lacquer finish). I think you can use General Finishes Gel Stain, because I don’t see anything on their product page saying it won’t go over a lacquer or varnish finish. Before starting, I would suggest calling General Finishes to make sure though. If you can’t use that product, I think the only option would be to paint them. Good luck!!
Can Minwax go over stained wood?
I stumbled upon a product called Minwax PolyShades. It claimed that it could go over stained wood furniture that has a polyurethane finish.
Can you sand Minwax cabinets?
After scrubbing it really well, let it dry, and then started to sand it. Thankfully, Minwax only recommends a light sand before applying the stain. Yes!
Can you put a stain on too thick?
This will ensure that the stain goes on evenly. Also though, make sure you do not put this on too thick! You need to put on a very light coat, but make sure you keep a wet edge the whole time. It takes a bit of practice to get the right amount of stain on your brush. I started by staining the door faces.
Can you use polyshade to refinish wood?
If the finish gets gummy, or the cotton ball sticks to the wood, then you cannot use PolyShades. But, if nothing happens, you can refinish wood cabinets using PolyShades.
Can you seal with shellac?
Seal with a shellac wash because a very thin dilution of shellac and alcohol will usually bring up the colors, and seal in some bad things we don't have the space here to deal with. Once that is dry, you can re-re-color if needed. Seal again if needed.
Is oak veneer good for hutches?
If the oak veneer on the plywood sides of your hutch is in good condition (not blistered, loose or cracked), and just the finish is cracked and in need of help, all the better! Given the vintage of this hutch, it wasn't top coated with polyurethane or probably even varnish.
What is the most important step in refinishing furniture?
The most fundamental step of any furniture refinishing or renewing project is to give the piece in question a good and thorough clean. This is especially true if the piece has been in storage or has been kept outside for an extended time. Additionally, if you don’t know exactly where the piece came from, it’s likely covered in a layer of grime from dust and dirt buildup.
How to get finish off wood?
Once most of the finish is off, switch to medium grit sandpaper to further remove any shine. Finally, finish off with a fine grit sandpaper to smooth out the wood until all finish is completely removed.
What is refinishing old furniture?
Refinishing old or antique wooden furniture is a popular hobby and has been growing in interest over the past several years. It’s a creative and rewarding DIY project that can provide you with eclectic and high-quality pieces for your home or office space.
What is a piece of wood made of before the 1960s?
Pieces from before the 1960’s are generally built from solid wood. Any pieces after that aren’t usually made from solid wood and are instead made from laminates and particleboard. These materials are usually not worth refinishing. On the flip side, older wooden pieces from before 1850 can be quite valuable. If you aren’t sure of a piece’s value, consult an antiques expert before starting a refinishing project.
How to revive a wooden table?
By keeping the existing finish, you can simply clean and wax the surface and revive the piece. This is the simplest method, and it works on wooden furniture that’s still in good condition.
When staining or painting and finishing your wood furniture piece, be sure that you’re working in a fully?
When staining or painting and finishing your wood furniture piece, be sure that you’re working in a fully lit space. This will help you to see any drips, runs or missed spots before it’s too late.
How to clean a wood carving?
Scrub down the surface using gentle strokes with a soaped-up sponge, or use a paintbrush if your piece has moldings and carvings to get into. Once you’ve scrubbed the surface clean, rinse it off with fresh water using the wrung-out sponge. Once the soap has been cleared away, pat the piece dry with a towel.
