Rekeying a House Lock
- Get a rekeying kit. Also called pinning kits, rekeying kits are available at most hardware stores and home centers,...
- Remove the exterior doorknob or lock face. Door knobs are held in place with a clip accessed by inserting a wire into...
- Take out the lock cylinder. ...
- Remove the cylinder retainer ring. Use a wrench-like ring remover...
Full Answer
How do you unlock the lock?
- From the Windows 10 login screen, press Ctrl + Alt + Delete (press and hold down the Ctrl key, then press and hold down the Alt key, press and release ...
- Enter your NetID password . ...
- Press the Enter key or click the right-pointing arrow button.
How to rekey a Schlage Lock without the original key?
To do this:
- Look for the tiny hole on the side of the doorknob.
- Insert the wire tool included in your rekey kit. If it doesn’t include a wire tool, you can also use a paperclip.
- Put pressure into the hole and pull off the knob.
How do I lock a door without a lock?
How to lock a door without a lock
- Fork it Up. For small emergency situations like a toilet door or a closet, you can repurpose a lock using household tools.
- Get a Portable. People who travel a lot – especially backpackers and salespeople – often carry locks with them. ...
- Build a Barricade. ...
- Buy a Commercial Barricade Device. ...
- Remove the Lock. ...
- Jam it Shut. ...
- Tie it Down. ...
How to re-key a lock?
How to Rekey a Lock
- Remove the Doorknob. The first step is to remove the doorknob from the door. ...
- Remove the Cylinder. Once you have the knob removed, you need to remove the cylinder from the inside. ...
- Take Out the C-Clip. ...
- Attach Key Plug. ...
- Dump the Old Pins. ...
- Insert New Pins. ...
- Replace the Plug. ...
- Reattach Knob to Door. ...
- Test the Lock. ...
How long does it take to rekey a lock?
Why do you need to rekey your locks?
How to push pins out of cylinder?
What to do if pins are not coded?
How to reattach a lock to a door?
How to keep upper lock pins in place?
Why do you need to lightly lubricate a lock when replacing pins?
See 4 more
About this website
Can I rekey a Kwikset lock myself?
Re-keying a lock is useful for improving the security of a home and it can replace previous keys that you have lost or may have been unknowingly copied. Many steps of this process contain small parts, so proceed with caution in this fix.
How do you rekey an old Kwikset lock?
8:0014:56Re-Keying a Kwikset Deadbolt & Door Knob (How-To) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou start with your special instruction sheets which is specific to your key and your pins that you'MoreYou start with your special instruction sheets which is specific to your key and your pins that you've received insert a new key into the cylinder.
Can you rekey lock yourself?
You can re-key a lock like a pro at a fraction of the cost. Re-keying kits are available for most lock brands but they're not interchangeable. You must buy a kit for each brand of lock in your home.
How do I rekey a lock to match an existing key?
How to Rekey a LockStep 1: Remove the Doorknob. The first step is to remove the doorknob from the door. ... Step 2: Remove the Cylinder. ... Step 3: Take Out the C-Clip. ... Step 4: Attach Key Plug. ... Step 5: Dump the Old Pins. ... Step 6: Insert New Pins. ... Step 7: Replace the Plug. ... Step 8: Reattach Knob to Door.More items...
Are all Kwikset locks Rekeyable?
Re-keying a new lock to match an existing Kwikset key is simple and easy. And all Kwikset pin & tumbler locks can be re-keyed to achieve convenient one-key operation across multiple locks. All you need is a Kwikset Re-keying Kit, a Kwikset key, and a pin & tumbler lock.
Can any Kwikset lock be rekeyed?
0:0912:00Rekeying Kwikset Locks - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith just a little training you can learn to rekey a lock to match an existing door lock all youMoreWith just a little training you can learn to rekey a lock to match an existing door lock all you need is the key.
Is it cheaper to rekey or replace locks?
Rekeying your lock is almost always cheaper than replacing a lock. This is because of the cheaper price of the key pins inside the locks, whereas when you replace a lock, you are paying for all brand-new parts.
Do you need the original key to rekey a lock?
Yes, it is possible for you to rekey a lock without the original key. A locksmith can change your locks even if you have lost or misplaced the original key. In general, it is possible to pick or shim the lock and unlock the door. Then, the locksmith will have a much easier time removing the lock cylinder.
How much does it cost to rekey locks?
Rekeying Home Locks Rekeying locks on your home typically costs $80 to $160. If you call the locksmith to your home, you might pay a trip fee of $50 to $100. The cost to rekey is $30 to $60 per lock, bringing you to that total. Rekeying is different and more affordable than replacing the locks.
Can you get locks rekeyed at Lowes?
Yes, as of 2022, Lowe's does rekey locks at almost all of its stores across the United States of America. However, customers should remember that Lowe's does not rekey all locks.
Does Ace Hardware rekey locks?
Ace Hardware has the capability of rekeying a wide variety of locks. If you are looking to rekey your locks, Ace Hardware can rekey them regardless of the brand (Schlesische, Kwikset, or Ace).
Can Home Depot make a key from a lock?
Additionally, Home Depot can make keys for cabinet locks, padlocks, and even sell skeleton keys designed for older locks. However, you will need your original key for Home Depot to make a copy. If you don't have your original key, you will need to have a locksmith decode your lock or do it yourself.
How do you rekey a Kwikset without the master key?
1:595:26How To Reset Kwikset Smart Key Without the Current Key ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the first thing you need to do is to remove that ring that holding the tailpiece. You can useMoreAnd the first thing you need to do is to remove that ring that holding the tailpiece. You can use any tool that you have I'm using a special tool. And you remove that ring.
Is it cheaper to rekey or replace locks?
Rekeying your lock is almost always cheaper than replacing a lock. This is because of the cheaper price of the key pins inside the locks, whereas when you replace a lock, you are paying for all brand-new parts.
How do you match Kwikset locks?
How to re-key your SmartKey Security™ locks?Prepare your door. Make sure you lock is installed on your door and that your door is all the way open. ... Insert current key. ... Insert the SmartKey tool fully and firmly into the SmartKey hole. ... Insert the new key you wish to use with the lock. ... Remove your new key.
Can Lowes rekey locks?
Yes, as of 2022, Lowe's does rekey locks at almost all of its stores across the United States of America. However, customers should remember that Lowe's does not rekey all locks. Customers can only rekey locks that they had purchased at Lowe's stores.
What It Means to Rekey A Lock
A pin and tumbler lock—the kind of lock found on locking doorknobs and deadbolts—contains a steel cutaway that holds a cylindrical plug and a numbe...
When to Replace A Lock Versus Rekeying
Both replacing and rekeying a lock effectively change out a lock to limit access, but there are some cases in which you have to go through the moti...
Options For Rekeying A Traditional Lock
Call a locksmith. This is the most expensive option. A locksmith will usually charge a set rate for a service call (often between $40 and $100) and...
Rekeying Smart-Type Locks
Some people—including apartment managers, owners of large office buildings, even regular Airbnb hosts—find it necessary to rekey locks frequently....
How to Re-Pin a Lock With Original Key - Instructables
Now you can add the pins in, in the correct order. Remember use the tweezers. See the later pictures of this step for how much oil there is. Once all the pins are in the cylinder, they should rest unevenly without the key in, and evenly across the shear line once you insert the key.
How to Rekey a Schlage Lock Without the Original Key? - Revolar
Step 1: Use legal tools for lock picking to open your own house door. Step 2: Take a paper clip.Press it firmly into the knob hole, which is situated on the knob side. As soon as the knob clip releases from your applied pressure using the paper clip, pull the knob off.
How much does it cost to rekey a lock?
A locksmith will usually charge a set rate for a service call (often between $40 and $100) and then charge you an additional fee (potentially $10 to $30) for every lock you want rekeyed.
How to replace a lock?
When to Replace a Lock Versus Rekeying 1 If you’ve lost the key that opens your existing lock (s), you won’t be able to disassemble the lock for rekeying. First replace the lock. 2 Rekeying won’t fix a worn or damaged lock. You’ll probably have to replace the lock with a cracked or warped locking mechanism soon, anyway, so consider doing so first. Then, if your goal was to change the locks so that you have the only key, you’re set; you only need to rekey if you want multiple locks to share one key. 3 When rekeying multiple locks to fit a single key, all locks must first have been made by the same manufacturer. For example, if your front door lock is a Schlage, the other locks you want rekeyed to match must also be made by Schlage. You cannot rekey a Kwikset or Sargeant lock to open with the same key as a Schlage lock, because different brands of locks have different size keyholes that only accept their own keys. If you’re dealing with multiple lock brands, you’ll need to decide on one and replace the others to match this brand before rekeying.
How much does a rekey kit cost?
A rekey kit for a single lock typically costs between $12 and $25 dollars, depending on the brand and type of lock. Hardware stores carry rekeying kits for some of the most common lock brands, but they can also be ordered from lock manufacturers and large online retailers like Amazon. Advertisement.
What is a pin and tumbler lock?
A pin and tumbler lock—the kind of lock found on locking doorknobs and deadbolts—contains a steel cutaway that holds a cylindrical plug and a number of springs and pins that allow a specific key shape to turn in the lock. In order for a key to turn the locking mechanism, the configuration of the pins must match ...
Can you rekey a Kwikset lock?
For example, if your front door lock is a Schlage, the other locks you want rekeyed to match must also be made by Schlage. You cannot rekey a Kwikset or Sargeant lock to open with the same key as a Schlage lock, ...
Can you rekey a Schlage lock?
You cannot rekey a Kwikset or Sargeant lock to open with the same key as a Schlage lock, because different brands of locks have different size keyholes that only accept their own keys. If you’re dealing with multiple lock brands, you’ll need to decide on one and replace the others to match this brand before rekeying.
How many locks can you rekey with a kit?
You must buy a kit for each brand of lock in your home. (If you’re lucky, they’ll all be the same brand!) Each kit will re-key six locks, but you can order extra pins if you need to do more. The kit will work on entrance and deadbolt locks, and it comes with two keys and all the tools you’ll need except a screwdriver.
How to pop a retainer ring off a cylinder?
Push the retainer ring tool against the retainer ring to pop it off the cylinder.
How to match pins to color code?
Dump out the old pins, insert the new key, and use tweezers or small needle-nose pliers to match the new colored pins to the color code on the special instruction sheet.
How to keep pins and springs from popping out?
Make sure to keep constant pressure between the plug and follower so the pins and springs don't pop out. You must keep the plug follower tight to the cylinder plug until it's completely removed so that the pins and springs don't pop out of the cylinder.
Can you rekey a deadbolt?
Instead of calling a locksmith, learn to re-key your entry and deadbolt locks like a pro, and at a fraction of the cost.
Do locksmiths charge for rekeying?
Locksmiths typically charge a fee to re-key an individual lock, even when you bring it to their shop. Since most homes have multiple doors with multiple locks, re-keying can get expensive. You can re-key a lock like a pro at a fraction of the cost.
How to rekey a Kwikset smart lock?
Rekeying your Kwikset Smart Key Lock with No Working Key. Step 1 – Remove the Locks from the Door. Step 2 – Freeing the Cylinder from the Housing. Step 3 – Pull the Lock Cylinder out of the Housing. Step 4 – Remove the Plug from the Lock Cylinder. Step 5 – Before you Pull the Plug Completely Out of the Core.
How to remove a lock cylinder?
Carefully pull the lock cylinder from the housing. Set the housing aside and examine the lock cylinder. On one end, you should see a small retainer clip that holds the cylinder plug in the lock cylinder. Removing this retaining clip without damage is probably the hardest part of the project.
What is reset cradle?
The reset cradle is handy for landlords with many locks that require frequent rekeying as tenants change and don’t return the keys. The reset cradle is relatively inexpensive and does the job of rekeying a Kwikset Smart Key Lock quickly and easily.
How to release a Kwikset lock?
Set the housing aside and examine the cylinder core. The cylinder core is held in the lock housing by a small retaining clip. The retaining clip slides to one side to release the lock cylinder. A small flat head screwdriver is the tool of choice at this point.
What is a Kwikset key?
Kwikset Smart Key locks are smart, fashionable devices that provide homeowners with an easy way to lock their doors. But, if you're a forgetful homeowner like myself, you may have misplaced or lost your original key. Follow along as we explore the two solutions for when you lose your Kwikset Smart Key lock's key.
How to get wafers aligned?
Getting the wafers aligned may seem difficult at first. Be patient. As you work, it will get easier. When all the wafers line up with the shear points, the plug should slip easily from the core.
Can you use two flathead screwdrivers to hold a lock cylinder?
You can accomplish the same thing with two flathead screwdrivers and some patience. You may need help to hold the lock cylinder while you manipula te the screwdrivers.
How to rekey a lock?
Here's a step-by-step guide of how rekeyable locks work. A professional isn't even needed, which saves you even more money: 1 Insert a notched step key into the cylinder. Turn it 180 degrees, which displaces the wafer and renders previous keys useless. 2 Turn the key to disengage and capture wafers. This is how the rekeying process is implemented. 3 Return the key to its original position to create a modified pin. By removing wafers from different stacks in different chambers, you can change the lock at any level. This essentially gives you the ability to have a seemingly endless amount of ways to construct a key, which makes copying impossible. 4 Set the key and let the cylinder reload a new and totally different lock combination. 5 Extract the key. You are finished.
How do rekeyable locks work?
These locks are designed to be changed without needing to be removed from the locking hardware and with just one turn of a key. Through what is called a "step change" method, locks can be changed without professional help or replacing any hardware.
Why upgrade your lock system?
A recent break-in certainly necessitates improving security (and improving lock systems). Losing a set of the master keys does , too. If you've just opened up a new storefront or want greater security at a production plant, then you should be thinking about changing the locks. Whatever the reason is, you always should be making sure your facilities are as secure as possible.
Why is it important to have the most secure key system?
Whether you're handling loss prevention at a retail store, managing physical assets at public buildings or trying to cut operational costs at a factory , you need the most secure key systems on the market. It's how you can protect your assets, reduce shrink and theft, and lower security costs.
Do you need a handyman to rekey a lock?
The benefits of such innovative technology are amazing, as no new hardware is required and you don't have to hire a handyman, which can be pricey. You can improve and update your lock systems very quickly and at a fraction of the cost (in comparison to rekeying locks). Whether you're trying to reduce loss at a clothing store or stop robberies at a school, rekeyable locks can streamline your key control.
Is rekeying locks cheaper?
Many businesses, organizations and municipalities simply can't afford it. Thankfully, there is a cheaper and more efficient way to change a lock system: user-rekeyable locks. The way rekeyable locks work is ingenious.
Can you send new keys to InstaKey?
InstaKey will expedite shipping of new keys to you so that security at your facility doesn't miss a beat.
What is rekeying a key?
Rekeying is a precise process that requires expertise—particularly when it involves rekeying multiple products. By offering this service at your store, you’re helping customers make their keys match by taking advantage of the safest and most reliable rekeying method on the market.
What is a Schlage rekey kit?
Schlage Rekeying Kits provide everything you need to get the job done—including all the tools and parts you need for repinning the cylinders of most Schlage locksets so that they work with a single key.
Can you change the code on a keypad lock?
Remind your customer that changing codes on a keypad lock or keypad deadbolt is a lot easier than changing keys or rekeying locks. In fact, on keypad locks , keys are only needed if customers ignore the low battery warning and the battery expires.
Can you use a duplicate key in a rekey?
Use caution when using a duplicate (aftermarket) key in the rekeying process. Duplicate keys wear faster and can result in key cut discrepancies during the rekeying process that cause the cylinder to stick when locked and unlocked after the cylinder is repinned.
What is smart key security?
SmartKey Security™ allows you to re-key your lock yourself in seconds.
Can you rekey your locks yourself?
SmartKey Security™ features re-key technology, which allows you to re-key your locks yourself in seconds, because we realize the person who has your key today may not be the same person you want to have your key tomorrow.
How long does it take to rekey a lock?
Support wikiHow by unlocking this staff-researched answer. It depends on your experience level and the kind of lock you’re dealing with. An experienced locksmith can rekey a lock in 2-3 minutes, but it might take 10-15 minutes for someone who’s new to the process. Getting the lock out of the door can take longer.
Why do you need to rekey your locks?
You'll usually want to rekey the locks to your house or car because of a break-in, theft or act of vandalism. You may also wish to rekey your locks if you lose your keys, if you feel that too many others have copies of your keys or if you want the convenience of being able to lock and unlock your house's front and back doors with the same key. You can go to a locksmith to rekey your locks or you can do it yourself. Move on to Step 1 below to learn how to rekey a lock on either your house or your car.
How to push pins out of cylinder?
Take off the end cam and inner spring, then insert a key into the lock tumbler to push the pins away from the cylinder walls. You should then be able to push the tumbler out from the back. The key does not have to be the one that is normally used with the lock.
What to do if pins are not coded?
If the pins are not coded, you'll have to use trial and error, inserting and withdrawing the key to make sure it fits the lock with the new pins installed.
How to reattach a lock to a door?
Reassemble the lock. Replace the cylinder plug and retaining ring, then replace the cylinder in the doorknob or lock face and reattach it to the door. Test the re-keyed lock to make sure it locks and unlocks with the new key.
How to keep upper lock pins in place?
Keeping constant pressure will keep the upper lock pins and their retaining springs in place when you remove the cylinder plug. If you should let the springs fall out, you can still pick them up and reinsert them but you will need tweezers to put the springs and pins back in.
Why do you need to lightly lubricate a lock when replacing pins?
You may want to lightly lubricate the lock when you replace the pins because it will reduce friction, reduce oxidation and cause the lock to last longer.
