The steps to remove a metal chimney are:
- Step 1: Remove the straps holding the chimney to your house.
- Step 2: Cut/Disassemble the chimney into manageable sections.
- Step 3: Remove the chimney in pieces until all of the chimney is removed.
- Loosen and remove two pairs of small screws, one at the top and one at the bottom, of one section of pipe using a small screwdriver. ...
- Lift up as you twist the pipe. ...
- Break one side loose by tipping it sideways and then pull down on the pipe to free it from the one above it.
What are the best ways to Clean my Chimney?
Tips on Keeping Chimneys Clean
- Only Burn Seasoned, Dry Firewood. More moisture in the logs produces more smoke and less heat output. ...
- Use Real Logs if Possible. Burning artificial wood releases more gases, which can result in additional creosote buildup.
- Allow Your Fire to “Breathe”. ...
- Bring on the Heat. ...
- Warm Your Flue. ...
- Mitigate Cleanup With Chemicals. ...
How much does it cost to remove a brick chimney?
The cost of removing a chimney from your home can vary quite a bit. That being said, most jobs like this end up costing between $2,000 and $4,000. The ultimate price that you pay will be based on the unique characteristics of your chimney. For example, as you would expect, full chimney removals cost more than partial ones.
How to remove an old chimney?
Things you need to consider when removing a chimney
- The bracket members should be 75mm x 75mm x 6mm mild steel angles with 6mm fillet shop welded joints with the angles pre-drilled to take a minimum of 2no M12 ...
- The bolts must be drilled into sound brickwork, not mortar joints. ...
- A plate (e.g. ...
Can I remove an interior chimney?
You can remove a chimney from the middle of a house on your own or with the help of a home demolition expert. The process can be as simple as removing your chimney’s bricks one-by-one. Most chimneys are independently supported and can be removed without threatening the structural integrity of your home.
Can you remove a chimney yourself?
There's a risk for chimneys to collapse during removal, so it is not advised to remove a chimney yourself. Even removing the chimney breast involves removing parts of a load-bearing wall. It's also at least a two-person job. You'll want to hire an engineer to examine the structure before hiring a local demolition team.
How do you remove an old metal chimney?
0:105:20How to remove a Metal Chimney [By Yourself] - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd that was way easier. So i used the metal snippers to cut the ones as i went up the rest of theMoreAnd that was way easier. So i used the metal snippers to cut the ones as i went up the rest of the metal chimney. So i'm cutting the strap there and then i went up and cut the one above it.
How difficult is it to remove a chimney?
You should keep in mind at all times that chimney removal is a lengthy, difficult process which can potentially lead to serious structural concerns. It is best to have several people working on the project at once, and having experts on-hand may significantly reduce the risk of complications.
How do you remove a wood burning stove pipe?
To disconnect chimney pipes, locate the first pipe connection. You should see screws or rivets on the bottom or "female" pipe end, which holds the top or "male" pipe end in place. Using a screwdriver or ratchet wrench, loosen the screws or rivets. Locate the second pipe connection and do the same.
Do I need planning permission to remove a chimney?
Do I Need Planning Permission to Remove a Chimney Breast? No. Planning permission is not required for internal alterations, like removing a chimney breast, as they don't constitute development. However, it's an offence to make alterations to a listed building without first obtaining listed building consent.
Is it a good idea to remove a chimney?
But there are reasons to have your chimney removed. Chimneys require maintenance like anything else, and if they don't get enough of it, they can start to cause problems with things like insulation, leakage, and even structural concerns—nobody wants a chimney stack to fall on their head.
Is my chimney load-bearing?
Most people with experience could usually tell whether the fireplace is load-bearing or not. But, if you're a newbie when it comes to renovation, you could check the wall of the fireplace above and below. If there is a wall on top of it and that wall supports another level of your house, that's a load-bearing wall.
Are chimneys structural?
Chimneys 101 A majority of chimneys are independently supported and are not structural to the walls or roof. However, it isn't uncommon for chimneys to be in the middle of a home or stretch from the foundation, through multiple stories, and out the roof.
Is it OK to remove a chimney stack?
You should only reduce or remove your chimney if you're absolutely sure it isn't providing ventilation or being used as a flue by any heat-producing appliance.
When should I replace my chimney pipe?
The average lifespan of a chimney flue liner is about 15 to 20 years. If you lived in your home 15 years or more you probably need to get the entire liner replaced to make sure it is up to code. If there is damage to your chimney flue liner your home is at risk for a serious home fire.
How much does it cost to remove wood burning stove?
How much does it cost to remove a wood burning stove? The average cost to remove a wood burning stove can be between $500 – $1,000, which includes demolition labor, debris disposal, chimney capping, and patching the ceiling, walls, and roof.
How do you get a stuck stove pipe apart?
0:121:06Jammed Telescoping Pipe Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe from the male side. And you'll just gently put your knee on it. Put that on the edge of the pipeMoreThe from the male side. And you'll just gently put your knee on it. Put that on the edge of the pipe and give it a little give it a little. Whack.
Is my chimney load bearing?
Most people with experience could usually tell whether the fireplace is load-bearing or not. But, if you're a newbie when it comes to renovation, you could check the wall of the fireplace above and below. If there is a wall on top of it and that wall supports another level of your house, that's a load-bearing wall.
Are chimneys structural?
Chimneys 101 A majority of chimneys are independently supported and are not structural to the walls or roof. However, it isn't uncommon for chimneys to be in the middle of a home or stretch from the foundation, through multiple stories, and out the roof.
How do you take down a chimney stack?
0:003:02Removing a damaged chimney stack | Homebuilding - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor this job we're going to need a brick hammer a bolster a trowel a club hammer. And then the ppeMoreFor this job we're going to need a brick hammer a bolster a trowel a club hammer. And then the ppe we're going to need goggles. And a mask.
How easy is it to take out a chimney breast?
It is possible to take out a chimney breast, but bear in mind the fact that this is not a quick DIY job you can do yourself. When you take out a chimney breast, you are also removing an important load-bearing wall.
How to remove the Chimney safely?from fireplacetown.com
The Chimney should be dismantled carefully to avoid damage and injury. The best method is using a “chimney jack” – a chimney remover tool which you can attach to the grate plate of your fireplace.
How much does it cost to remove a chimney?from hometowndemolitioncontractors.com
Expect to pay around $2,500 - $7,500 to have your chimney removed completely.
Why do you pay more for a chimney?from hometowndemolitioncontractors.com
If your chimney is used to support the structural framing of the house, expect to pay more in order to make the necessary framing adjustments. The more floors your chimney goes through, the more you should expect to pay.
What is chimney stack?from hometowndemolitioncontractors.com
Chimney stack: the part of the chimney that extends above the roof. Chimney breast: the part of the chimney within the home, below the roof. All chimney removal projects involve the removal of the chimney stack, but that doesn't automatically mean that the chimney breast must be removed, too. It depends upon how your chimney is installed, as well ...
What factors play a role in the total cost of a chimney demolition project?from hometowndemolitioncontractors.com
The duration of the chimney demolition, complexity of the job, and other factors play a role in the total cost of the project.
How long after chimney removal can it rain?from fireplacetown.com
Most importantly, make sure that there will be no rain in the forecast for at least three days after beginning removal of the chimney as any water remaining inside could damage nearby structures or even cause mold growth if left alone long enough.
What happens if a chimney burns?from fireplacetown.com
Chimneys are also fire hazards so if one starts burning, there could be major damage done in your neighborhood or even yours! That means everyone who lives near you would suffer from damages because of that single incident.
How thin is a chimney pipe?
Interior chimney pipe is designed to radiate heat to the inside of the room. It is thin walled, typically 18- or 24-inch sections.
How to remove a section of pipe?
Loosen and remove two pairs of small screws, one at the top and one at the bottom, of one section of pipe using a small screwdriver. It doesn't matter which section you choose.
How to break creosote from pipe?
Put on some gloves and grab the pipe with both hands. Twist it back and forth. If it will not twist, bump it side to side with your palms until you hear a gritty sound, which means you have broken the creosote from the inside. Twist it back and for th again until it moves slightly.
How to break a pipe loose?
Break one side loose by tipping it sideways and then pull down on the pipe to free it from the one above it. Wiggle and pull the pipe side to side until the top and bottom ends have come loose.
What happens when a pipe comes loose?
Black gravelly, grainy chunks will fall out of the pipe when it comes loose. Spread newspapers on the floor if inside to catch them.
How much overlap does a pipe have?
Lift up as you twist the pipe. Bump it side to side, twist and pull up at the same time. The two sections overlap each other typically by only 1/2 inch.
Can you remove creosote from a chimney?
Over time, creosote, a thick black gunk, builds up in your chimney pipe and you can't remove it unless you separate the pipe to get access to the pipe interior. It's easier than it looks. Advertisement.
How to remove the Chimney safely?from fireplacetown.com
The Chimney should be dismantled carefully to avoid damage and injury. The best method is using a “chimney jack” – a chimney remover tool which you can attach to the grate plate of your fireplace.
What to do after removing chimney?from fireplacetown.com
After you’ve removed your chimney, make sure to clean up the area. If possible sweep both inside and outside of your house before power washing any remaining residue/dust off surfaces. Finish by re-hanging or replacing windows that were covered with tarps during demolition work. Now it is time for a celebratory beverage! You have successfully demolished one part of what will become an amazing renovation project in the coming months!
What is a chimney?from fireplacetown.com
A chimney is a structure that vertically conducts combustion gases from the flue to be released at above it.
How long after chimney removal can it rain?from fireplacetown.com
Most importantly, make sure that there will be no rain in the forecast for at least three days after beginning removal of the chimney as any water remaining inside could damage nearby structures or even cause mold growth if left alone long enough.
What happens if a chimney burns?from fireplacetown.com
Chimneys are also fire hazards so if one starts burning, there could be major damage done in your neighborhood or even yours! That means everyone who lives near you would suffer from damages because of that single incident.
Why remove brick from fireplace?from fireplacetown.com
The most common reason to remove bricks from your fireplace will be because they were damaged or deteriorated over time, and replacing them with new ones can help increase their lifespan as well since old materials like these tend to work best when installed by experts who know their trade inside out! If you're planning on installing an entirely different kind then that's another great reason too – just remember that doing any masonry work requires permits in many places today especially if there are costs involved so it's best to hire a professional if you don't have any experience with this kind of project.
Why is it easier to use an open ended pipe wrench or a crescent wrench?from fireplacetown.com
Generally speaking this is going to be easiest when you have something like an open-ended pipe wrench as opposed for just a crescent wrench because there isn’t enough space between those items for leverage provided by its size.
What to consider before removing a chimney?from homereference.net
These include both short-term and long-term effects from the removal, as well as setting goals and informing neighbors of the project before beginning. Artifacts.
What to do if your chimney is falling?from diligentdevelopments.co.uk
If your outside chimney has fallen into disrepair, or you simply don’t like the way it looks, it’s probably time to look into exterior chimney removal the easy way. Maybe you want to regain interior floor space and are no longer using the fireplace inside the home, so you have no need for the brick sculpture that runs up the entire side ...
How long does it take to remove bees from a chimney?from wikihow.com
Tip: Regardless of the method you choose in this section, removing bees from a chimney can take 3-5 days. This is a fairly complex job.
How to tell if a chimney is solid or hollow?from diligentdevelopments.co.uk
Assuming that your house is a frame construction and not masonry, you may be able to determine how intricately the chimney has been built with the structure of your home by knocking on the inside wall above the fireplace but below the ceiling. When you knock, do you hear a hollow sound. Or, does it sound more solid? If you can’t tell for sure, you will need to get a professional contractor who will be able to determine the difference. Even so, the expert might still need to punch a few holes in your wall before being able to know for sure. There is a specific sound and feel to knowing which often requires skill.
How much does an exterminator cost?from wikihow.com
An exterminator’s services are fairly comparable to a bee removal company. It will usually cost $200-300, but it may run over $1,500 if the hive is particularly large or the chimney is especially difficult to access.
What happens if you remove a chimney?from diligentdevelopments.co.uk
Once the exterior chimney has been removed, you will be left with a hole in the roof and a hole in the main room where the fireplace opening was. If the chimney was intertwined with the architectural structure of the home, you will also need to repair and shore up anywhere that the chimney once took up.
How to get rid of bees in chimney?from wikihow.com
Explain your situation to them to see if they have experience removing bees from chimneys. Swarm rescues and beekeepers will use a vacuum to remove the bees and relocate them elsewhere.
What is a full removal of a chimney?
A full removal involves getting rid of the entire structure and often leads to extra space in rooms where the breast is intruding . Full removals require a lot of extra structural reinforcement, as it creates a large gap in your home.
What to consider before removing a chimney?
These include both short-term and long-term effects from the removal, as well as setting goals and informing neighbors of the project before beginning. Artifacts.
What is the chimney breast?
Breast. The chimney breast is both the most visible and vital portions of a chimney. This brick wall encases the flu and other functional parts, providing extra insulation and major structural support. Unfortunately, the breast has a habit of protruding into all the rooms it passes through.
Why do you need to remove a chimney stack?
Leaks and structural damage are the most common reasons for wanting to remove a chimney stack, and in such cases, you will have the option of simply covering over the rest of an unused chimney when you extend the roof over the gap left by the stack. Personal Considerations. There are a number of things to consider before planning out ...
Is chimney removal a long process?
Realistic Goals. You should keep in mind at all times that chimney removal is a lengthy, difficult process which can potentially lead to serious structural concerns. It is best to have several people working on the project at once, and having experts on-hand may significantly reduce the risk of complications.
What can you find when you tear down a chimney?
When tearing down chimneys, artifacts left over from the original build ers may often be found. These include signed or dated bricks, trinkets collected by animals who took up residence in the flu, or other surprises. In some cases, these may prove of value, either directly or historically, so always keep an eye out for anything unusual.
Can a chimney be salvaged?
Masonry experts can tell you if the chimney can be salvaged and simply sealed off or repaired for less cost than removal. Structural experts will need to be contacted to explain any potential concerns in the event you are removing the breast from one or more floors.
What is the pipe in my bedroom?
The pipe in the bedroom is chimney pipe. Is it possible that the creosote stain is from above and just dripped down lower? Also, if the label is still on the pipe, make sure it was not installed upside down. Pictures will help us see what you are seeing.
How long does it take for wood to dry out after splitting?
If you are cutting / splitting now for this winter that would be the main culprit- green wood. Most wood is going to take 2 years or more to dry out after it is split - the reason for the 3 year plan- split this year for use 3 years later and then a constant rotation.
Should you start a chimney at the top?
Yes you would want to start at the top. But if the joints are leaking smoke there is something very wrong. Even if the chimney is completly blocked there should be no smoke escaping the joints in the chimney.
Why disconnect chimney pipe for wood stove?
You may need to disconnect the chimney pipe for your wood stove in order to clean the pipe, replace damaged parts or correct a problem with the initial installation. Taking a wood stove pipe apart represents an easy task, but it can be messy and hazardous to your health and home if not performed with some important safety considerations in mind.
What to do if you don't feel comfortable disassembling a wood stove?
If at any point you don't feel comfortable performing a wood stove disassembly on your own, call in a professional.
How to get rid of creosote in wood stove?
Creosote builds up inside wood stove pipes, which is a highly flammable and dusty material that you don't want all over your home or in your lungs, as the CDC warns it may pose a health risk. Wear a protective face mask and goggles to protect your eyes and respiratory system and wear gloves so that you don't accidentally slice your hand on the metal pipes. Lay old bedsheets or drop cloths out around the stove and work area.
Why do pipe tops slide down?
It's useful to have a helper at this point because once the top screws are loose, the narrower male end of the pipe will slide down. An assistant can hold onto the pipe to make sure it doesn't crash down violently. The pipe does need to slide down slightly in order to free its top edge, and then it can be angled slightly to the side and lifted free from its bottom connection.
Can you use an ash vacuum to clean a wood stove?
You can use an ash vacuum to safely clean up the remaining ash that may have settled in your living space. If at any point you don't feel comfortable performing a wood stove disassembly on your own, call in a professional. Advertisement. references. YouTube: Kevin Robinson: How to properly install a chimney pipe.
Can you take apart a hot stove pipe?
The No. 1 rule of thumb to follow is to never, ever try to take apart a hot stove pipe. You will burn yourself by simply touching the pipe, and you'll also spread hot ash and creosote around your home, which creates a major fire hazard. Make sure there are no hot ashes or embers within the stove and that the pipe is cool to the touch.