Uninstall the Old Drain Pump
- Release Drain Hose Spring Clamp with Pliers Look underneath the washer and you will see several exposed components. ...
- Remove Drain Hose Now the drain hose is loose and can be pulled off the end of the drain pump. ...
- Open Wire Harness Compartment On the drain pump housing is a small compartment that flips open. ...
- Disconnect Wires ...
- Remove Mounting Bolts ...
- Extract and Discard Old Drain Pump ...
How to replace a washer drain pump without removing it?
Flip open the identical compartment and reconnect the wire harness halves to the new drain pump. Flip closed the wire harness compartment and make sure it clicks securely. This compartment can protect the wires from any leaks. Now fit the washer drain hose onto the end of the new drain pump.
How do I Stop my Kenmore washer from leaking?
Place a shallow drain pan in front of the washer and then remove the plug from the small drain hose on the pump body. Drain any water remaining in the pump body and washer tub. Reinstall the plug and set aside the drain pan. Put a towel under the pump body hoses to catch leaks.
How do I replace the drain pump on my Kenmore Elite washer?
Open the drain pump filter cover at the bottom of the washer front panel. Remove the screw that secures the plastic pump housing to the frame of the washer. Remove the plastic pump housing. Remove the mounting screw from bottom of the front panel. Open the washer door.
How do you drain the water out of a washing machine?
Drain the Water. If you have a wet/ dry vacuum, use that to suck up any water in the bottom of the washing machine drum. You can also bail the water out using a small bucket or clean, empty coffee can. The most efficient way to drain the water is to open up the washing machine so that you can get to the hose.
Is it easy to replace a pump on a washing machine?
Replacing the pump in a washing machine is a surprisingly simple job that most moderately handy people can accomplish within an hour or so and with basic parts and tools. The process and steps used are also the same ones used when simply cleaning out the pump or hose in the event of a clog.
Where is the washing machine drain pump located?
The drain pump is located at the bottom of your washing machine, but can be easily accessed in order to replace it if need be. If your washing machine is failing to drain during a wash cycle, it could be that there is a problem with the drain pump.
How do I access my washing machine pump?
0:111:57How do I unblock my washing machine pump? - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure you replace the cap and hose once you have drained the water unscrew the filter cap andMoreMake sure you replace the cap and hose once you have drained the water unscrew the filter cap and slide it out.
How do you remove a washing machine drain tube?
Remove the hose clamp securing the drain hose to the pump by unscrewing it with a flat-head screwdriver. If the hose has a spring clamp, squeeze the legs of the clamp with a pair of adjustable pliers and move the clamp a few inches down the hose. Place a towel under the pump and pull the hose off the pump's outlet.
How do I know if my drain pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don't see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
How much does it cost to replace a washing machine drain pump?
On average, expect to spend $300 to $400 for a pump replacement job. Washing machine pump repairs are usually required when you note active leaks or a tub that doesn't drain.
What is wrong with a washer that won't drain?
A washing machine not draining can have multiple causes, including a clogged or jammed drain hose or a broken pump, lid switch, or belt. No matter the culprit, you need to drain the water from the washing machine before diagnosing the issue or doing any work to remedy the situation.
How do you test a washing machine drain pump?
0:201:37How to test a washing machine pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipSee the green blades. Place stop it you should be able to see them come to rest. That's one of theMoreSee the green blades. Place stop it you should be able to see them come to rest. That's one of the blades of the impeller. That's it just how you test.
Why do washing machine drain pumps fail?
A pump can fail in two ways: mechanically and electrically. A mechanical failure can be caused by a foreign object caught in the pump, or direct damage to a pump component, such as the impeller. Inspecting the pump can often reveal a mechanical failure. An electrical failure can be diagnosed by using a multimeter.
Why does my washing machine smell like rotten eggs when it drains?
If your washing machine smells like rotten eggs, check the machine's water supply and drain hoses for a quick remedy. The smell can come from the water inlet or blocked drain system.
How do you clean a smelly washing machine drain?
Washing Machine Drain Cleaner Begin by adding white vinegar to the washing machine detergent dispenser and running a normal wash cycle without any clothing. The vinegar is flushed down to the drain and helps to neutralize foul odors.
How do I know if my washing machine drain is clogged?
Start by running your washer through a drain cycle. Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer's drain is most likely the issue.
How do you test a washing machine drain pump?
0:201:37How to test a washing machine pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipSee the green blades. Place stop it you should be able to see them come to rest. That's one of theMoreSee the green blades. Place stop it you should be able to see them come to rest. That's one of the blades of the impeller. That's it just how you test.
Do top load washers have a drain pump?
The drain pump is located underneath the washer and handles draining the tub between cycles. This guide will walk you step-by-step through replacing the drain pump for a top-load washer.
Why won't my washer drain or spin?
If your washer won't drain or spin, the water level control may be faulty. Open the machine's control panel and look for a plastic tube attached to the water level valve. If it's clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
Why isn't my washer draining?
A washing machine not draining can have multiple causes, including a clogged or jammed drain hose or a broken pump, lid switch, or belt. No matter the culprit, you need to drain the water from the washing machine before diagnosing the issue or doing any work to remedy the situation.
Where is the drain hose on a washing machine?
The drain hose is accessed from a panel on the front of the washing machine, usually toward the bottom.
How long does it take for a washer to drain?
Drain the washer tub. Some washers will automatically drain after being unplugged for around five to ten minutes, so it’s not a bad idea to let the appliance sit for a bit before moving on if it’s still full of water. Otherwise, you’ll need to either bail out the tub or manually drain it with the emergency drain hose.
How to access washer gasket?
You can access the gasket by opening the washing machine door. The rubber seal around the opening of the washer is the gasket, and it is held in place by a metal clamp — a round metal wire secured by a spring.
How to remove the front control panel on a washer?
Remove the front control panel. Start by removing the detergent drawer completely if your washer has one. There should be a button or tab in the back of the drawer that you can press to release the drawer and pull it all the way out. Set this aside and remove the mounting screws securing the panel.
How to remove detergent drawer from washer?
There should be a button or tab in the back of the drawer that you can press to release the drawer and pull it all the way out. Set this aside and remove the mounting screws securing the panel. On the model featured in our repair video, these screws are found in the same compartment as the detergent drawer.
How to remove a spring from a gasket?
Locate the spring — it should be on the bottom of the gasket — and use a flat head screwdriver to gently pull it away from the gasket. Slide the screwdriver in from the top of the spring to avoid damaging the gasket and carefully work the spring and the attached clamp out of the groove it’s snapped into to remove it.
How to remove old pump from a septic system?
The old pump will be attached to the assembly by a few mounting screws and should be easy to remove once those are unscrewed. Once it’s off, grip the pump to pull it out of the plastic cover. You can slide the new pump back into the cover and attach it to the assembly.
Where is the drain pipe on a washer?
The drain pipe is usually found at the bottom of the machine, underneath the barrel.
What to do if your washer is full of water?
If you find your washer full of water even though the cycle has ended, you may need to replace the washing machine drain hose. Before you can put on the new one, you have to remove the old one. This is neither a complicated nor overly delicate task, so even beginners should not be afraid to dip a toe into the world of do-it-yourself repairs.
Why is my washing machine running out of water?
You might also hear the washing machine finish running through its cycle only to find that your clean clothes are sitting in a washer full of water because it did not drain.
