How do I remove the fan motor from my range hood?
Remove the fan motor housing with attached fan wheel or blades from the range hood by pulling it off. If the fan housing is held in place with latches, push the latches up and remove the fan motor housing.
How do you remove the fan from a whirlpool stove top?
Pull the shield off of the range hood. Remove the fan motor housing with attached fan wheel or blades from the range hood by pulling it off. If the fan housing is held in place with latches, push the latches up and remove the fan motor housing. Use a sturdy footstool while removing the stove ventilation fan for firm support.
How to remove range hood in 10 steps?
How to Remove a Range Hood in 10 Steps Step 1 - Disconnect the Power Step 2 - Clear Some Space Step 3 - Inspect the Hood and Remove Hardware Step 4 - Locate and Identify Wiring Step 5 - Disconnect Wiring Step 6 - Remove Conduit Connector or Cable Connector Step 7 - Remove Fasteners Step 8 - Support the Hood Step 9 - Disconnect Power
How do I change the filter on my range hood?
If your range hood filter has handles, grip them and lift the filter inside the vent hood. If your hood doesn’t have handles, use two hands to carefully lift the filter. 2. Slide the range hood filter to the back of the hood.
How do you remove a kitchen exhaust fan?
Ventilation Fan Removal StepsGo to the main circuit breaker and switch off the power to the kitchen. ... Use a neon tester to ensure the power is out. ... Look at the range hood and remove the metal grease filters. ... Using a finger, carefully rotate the fan blades locating the electrical wires of the ventilation fan.More items...•
How do you remove a range hood motor?
InstructionsDisconnect electrical power. ... Remove the filters and the bottom panel. ... Remove the side panels. ... Pull the range hood down from the cabinet. ... Remove the fan blade. ... Remove the fan motor. ... Install the new fan motor. ... Reinstall the fan blade.More items...•
How do you take apart a range hood?
0:203:39Nutone Range Vent Hood Disassembly, Vent Hood Repair HelpYouTubeStart of suggested clipEnd of suggested clipUse a quarter inch socket to remove the screws securing the control cover pull the cover off. YouMoreUse a quarter inch socket to remove the screws securing the control cover pull the cover off. You can now disconnect the wires from the switch you're replacing.
How do you replace a stove fan?
0:212:30How to Change Over-the-Stove Fans : Fan Repair & Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow after you've loosened them up you go ahead and untighten them with your hands and then grab theMoreNow after you've loosened them up you go ahead and untighten them with your hands and then grab the metal bar. And pop it out. After you popped it out this wire is hooked back in here to a plug.
How do you fix a noisy range hood fan?
0:061:26Range Vent Hood Loud or Noisy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you should simply replace the motor with a new one to solve the problem. It's also possible thatMoreAnd you should simply replace the motor with a new one to solve the problem. It's also possible that a damaged fan blade or blower wheel could be responsible for noisy operation.
How do you clean a greasy hood fan?
0:343:28How to Clean a Greasy Range Hood and Filter (AMAZING!!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what I'm going to do is putting in a put it in a picking sheet sheet and spritz off the surfaceMoreAnd what I'm going to do is putting in a put it in a picking sheet sheet and spritz off the surface using the super clean it immediately started to work but I let it sit for five to seven minutes.
How do you remove a Broan range hood fan?
0:499:26Broan Range Exhaust Hood Installation and Removal - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's held in by these two screws right up there. And there's another two screws right up there andMoreIt's held in by these two screws right up there. And there's another two screws right up there and those are the ones that are gonna be holding it in this one also has one screw there on the side.
How do you replace a range hood on a fan motor?
0:522:21Nutone Range Vent Hood Fan Not Working? #S99080666 - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the old motor out of the bracket. Install the new fan motor by positioning it on the mountingMorePull the old motor out of the bracket. Install the new fan motor by positioning it on the mounting bracket thread the mounting nuts on to secure. Connect the new wire harness.
How do you replace an exhaust fan motor?
0:162:15How to Replace Bathroom Exhaust Fan Motor - YouTubeYouTubeStart of suggested clipEnd of suggested clipI started by pulling the plastic cover down it's held in place by these springy little pins you justMoreI started by pulling the plastic cover down it's held in place by these springy little pins you just squeeze them together and then you can remove it from the fan housing.
How do you test a range hood fan motor?
0:381:42Top Reasons Range Vent Hood Fan & Lights Not Working - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a multimeter to test the fuse for continuity. A continuous electrical path present inMoreYou can use a multimeter to test the fuse for continuity. A continuous electrical path present in the part. If the fuse tests negative for continuity it has blown and will need to be replaced.
Why is grease dripping from range hood?
The first filter often visible under your range hood is a shiny woven aluminum filter. This filter is the most common culprit for puddles of grease appearing as if by magic on your stovetop. Once this grease filter is full and can hold no more, the grease collects and beads up, and eventually drips back onto the stove.
What do you need to remove from a range hood?
Remove all covers, filters, light bulbs, etc. Many times, range hoods are held by one or more fasteners that may be hidden behind these objects.
What happens if you run a range hood without a filter?
Operating the hood without a filter results in grease and oils collecting on the fan blades and the interior of the range hood and duct work (if installed). These deposits of grease and oil are a fire hazard, and will result in loss of balance of the fan blades.
What to do if service disconnect is off?
Restore power. If the service disconnect or main was turned off, or if the hood is part of another circuit that is needed, the fuse (s) or circuit breaker (s) will need to be returned to the on position. Be sure to safely terminate the wires as described above before performing this step.
What color wires are on a hood?
Generally, white, black and possibly a green or bare wires from the hood are connected to like colors of wires from a cable or conduit with wirenuts or other connector designed for the purpose. Since the wires have been identified in the previous step, this will not be of concern.
What is the purpose of an extractor fan?
Whether you call it an extractor hood, range hood, kitchen hood, cooking canopy, extractor fan, whatever...Its main purpose is to remove the air associated with cooking. That air can contain grease, heat, odors, and steam. There may come a time when you have to replace or permanently remove a range hood. Although these instructions won't apply to every kind of hood fan, they will provide an overview of the process.
How many volts does a range hood have?
Most range hoods are 120 volt. One single pole (single width) circuit breaker or fuse will likely provide power for the range hood. 240 volt electric ranges by contrast, will likely be supplied by one two pole (double width) circuit breaker or two cartridge fuses.
Where to inspect a hood?
Inspect the area directly above the hood. This may be a cabinet or other storage area that can provide a great deal of information as to how the hood is secured, powered and ducted (in the case of ducted units only).
How to remove grease filter from hood?
The filters may slide out or be held in place with clips. Depress the clips to remove the grease filters. For filters without clips, push the filter straight up and slide it over to one side to make a space for your fingers to fit. Reach up into the space and pull the filter end down and tilt it out of the hood.
Where to turn off power to kitchen?
Turn off the power to the kitchen at the main circuit breaker.
How to get hood filter out of hood?
With your range hood filter all the way to the back, tilt the front edge downward and lift it out of the hood.
When you first insert your range hood filters, what do you remove?
So, when you first insert your range hood filters, remove this plastic covering.
How to put filters back in a vent hood?
To place your filters back in your vent hood, set them into your range hood with the bottom facing up. Use the handles to make this process easy.
How to clean a filter?
1. Dishwasher detergent and warm water . One easy hands-free method to clean your filters involves dishwasher detergent or dish soap and warm water. Dish detergent and warm water help break down the grease and baked-on food on your filters.
How to get grease out of baffle filter?
When using boiling water, you have to be careful. But it can be incredibly effective at cutting tough grease from baffle filters. Pour a little boiling water over the grease filter and scrub the affected area. You won’t need to use boiling water and dish soap for the whole filter – only the most difficult areas.
What is the housing on a range hood?
Plastic housing protects the range hood blower inside the hood. It’s bolted into the stainless steel. Look for the side covers that protect the fan blades. Right inside these covers, you’ll find the charcoal filters.
How long does it take for a range hood to clean?
After three to six weeks, you need to remove your range hood filter to clean it. Otherwise, heavy grease and dirt produced from your cooking accumulate in the baffles. If this goes unchecked, your range hood will not run efficiently. The grease will block the smoke and cooking exhaust from leaving your home.
How to fix a fan that is not turning on?
1. Turn off the power to the fan at the breaker box. Confirm that the power is off with a noncontact circuit tester. Hit the switch a few times to make sure that it's been disconnected from the power.
How to remove wire nuts?
They may be colored black, white, red or even yellow. They all do the same thing. Twist them off counterclockwise with your fingers. Pull the loose wires apart with your fingers.
Is a hood vent good?
Hood vents are a great idea -- in theory. Unfortunately, older retro-style hood vents were poorly designed. They are noisy, and even when working properly, they barely suck up enough fumes or smoke to make them worthwhile. After a few years, the fans and filters get greasy, and you might quit using the vent because it doesn't work at all.
How to keep a fan safe?
Always keep notes of them so that you know the sequence of installation. Also, put them in a clean bucket to keep them safe. Now you will get to see the motor and the fan. Take a picture to help in your assembly later on. Get someone else to hold the fan.
How to make a fan shine?
Now, it is time to make the fan shine. Clean the fan as thoroughly as possible to take away all the grease and dirt. If the blades are detachable, let them sit in degreasing soapy water or ammonia for a while. The motor shouldn’t come in touch with water. It does have a protective covering which you shouldn’t take out. Let the fan and motor air dry to the fullest; meanwhile, clean the filter and the screens.
What is the fan attached to?
The fan is attached to the motor and it consists of the inner part of the range hood. People often use steam to clean their range hood but they are not aware that by doing so there is possibility of motor damage due to moisture.
Is a range hood good for a kitchen?
Range hood is probably one of an important parts in your kitchen. We often overlook them and think that their self-cleaning feature is enough to keep them clean. But from time to time it is crucial to take a proper look in them.
Do you have to note fan noise before taking apart range hood?
The fan noise should be noted before taking apart of the range hood. This will work as a note of comparison later on.
Can a stove fan come in contact with water?
The motor shouldn’t come in touch with water. It does have a protective covering which you shouldn’t take out. Let the fan and motor air dry to the fullest; meanwhile, clean the filter and the screens. Now attach the motor carefully back into the range hood. Take the help of the pictures for stove hood fan replacement.
