Remove the 10mm bolts from the headlight bracket Remove the rubber boot from the backside of the headlight Remove the 10mm bolt Pull the headlight out and hit the top to release it Disconnect the headlight wiring harness
How do you remove a headlight assembly from a truck?
Use a flathead screwdriver to push in the tab on the side and pull off the connector. Now that all connections between the car and the headlight assembly are disconnected, it is safe to remove the headlight assembly from the truck. Almost done!
What to do if your headlights are not working on Dodge Ram?
If the headlights on your Dodge Ram aren’t working, there are two approaches you can follow. One, you could either get digging to find out the cause. Or, you could take your car to a mechanic for troubleshooting. Both these options have pros and cons. Starting with the DIY option, won’t cost you a lot of money.
Do you need a harness for a headlight on a ram?
The following installation guide we take you through the installation of your new ALPHAREX HEADLIGHTS for your 06-08 Dodge Ram step by step. NOTE: Some vehicle require the DRL harness installed for the headlight to function properly. Disclaimer: This installation article is a tutorial guide.
How do you wire a headlight to the DRL?
If you have a yellow wire connector on the DRL harness, wire and connect that to the driver side headlight. You will only need to connect to one side. Lastly, run the last red wires to the headlight. (one for each side) Plug the 2 connectors to the headlight and perform headlight adjustment.
How do you change a headlight on a 2006 Dodge Ram?
0:454:45How to Replace Headlights & Bulbs 06-08 Dodge Ram - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen up the door pop the hood and reach under lift up. And then you'll see two screws right hereMoreOpen up the door pop the hood and reach under lift up. And then you'll see two screws right here they're ten millimeter you can also use a t30 Torx driver we'll remove those at the front of the tire.
How do you remove a whole headlight assembly?
InstructionsStep 1: Remove the old headlight assembly. ... Step 2: Disconnect the assembly. ... Turn the headlamp retainer ring counter-clockwise to remove it from the headlamp. ... Step 3: Disconnect electrical. ... Step 4: Remove old assembly. ... Step 5: Replace the assembly. ... Step 6: Connect the new assembly.More items...
How do you remove a headlight from a Dodge Ram?
2:4411:04How to Remove Grill/ Headlights on 2019-2022 Dodge Ram ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then we have one 10 millimeter bolt here on the side wedged between the fender with that lastMoreAnd then we have one 10 millimeter bolt here on the side wedged between the fender with that last bolt removed we're going to pull the headlight out and then unplug the main connector.
What tools are needed to remove headlight assembly?
Many headlight bulbs can be removed without tools, but some do required the use of a flathead or Phillips screwdriver. If there are power wires connected to the back of the bulb, remove them. There might also be a dust cover that you need to remove from the back of the headlight.
How do I remove and replace a headlight unit?
2:195:19Headlamp Assembly Replacement: HOW TO ESCAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you have your side marker connector which is over there reach in and disconnect that guy soMoreAnd then you have your side marker connector which is over there reach in and disconnect that guy so press on that tab. And pull off the connector. And you'll be ready to lift away your lamp. Housing.
How hard is it to replace an entire headlight?
Fortunately, it's often easy to change a headlight. Most of today's halogen high-intensity-discharge (HID) or light-emitting-diode (LED) bulbs are simple to replace. They are held in place by thin wire clips or rotating bayonet-style retainers.
How do you remove the headlights on a 2017 Dodge Ram 1500?
0:066:45How to Replace Headlights 11-17 Ram 1500 - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnder the center of the hood on the bottom. There's this lever. You'll want to move that and thatMoreUnder the center of the hood on the bottom. There's this lever. You'll want to move that and that will release the hood.
How do you take the headlight out of a 2018 Dodge Ram?
1:368:152009-2018 Ram Headlight Bulb Change Head Light Removal ...YouTubeStart of suggested clipEnd of suggested clipSo you push from the rear. And then it will pop out. Once you have it out you'll be able to reachMoreSo you push from the rear. And then it will pop out. Once you have it out you'll be able to reach the back of the headlight assembly. To change your light bulbs.
How do you change a headlight on a 2020 Dodge Ram 1500 classic?
0:512:49LED Headlight Bulb Install for RAM 1500 2020 Classic - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you use a tool to pop those off. And then four 10 millimeter bolts there's one. There. They'reMoreAnd you use a tool to pop those off. And then four 10 millimeter bolts there's one. There. They're all underneath. There's two and as you lift this plastic thing up you'll see uh the remaining.
What tools do you need to change headlight?
Tools you need: New light bulb(s) -- Make sure you get the right type of bulb for your vehicle (your local auto parts store should be able to match a bulb with your make and model) Alcohol wipes and tissues (to clean and hold the new bulb) Phillips screwdriver.
How do you take a headlight out?
0:402:34How To: Replace a Car Headlight Bulb - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll want to detach the wire socket from the bulb. Just press the tab to release it. And pull onMoreYou'll want to detach the wire socket from the bulb. Just press the tab to release it. And pull on the socket. Be careful to pull on the socket. And not the wires.
Can you replace your own headlight?
Most times, changing a headlight is straightforward and doesn't require taking your car to a mechanic. Check out other DIY car maintenance projects anyone can do.
How do you separate headlight housing?
1:192:28TRS Tips: Baking and Opening Headlight Assemblies (sealed with ...YouTubeStart of suggested clipEnd of suggested clipIt's okay if the plastic deforms a little bit you can always bend that back. Later. Just get theMoreIt's okay if the plastic deforms a little bit you can always bend that back. Later. Just get the screwdriver in. There. So we got the two halves of the housing separated.
How long does it take to change headlight assembly?
When replacing your car's headlight, whether you are replacing only the headlight bulb or entire headlight housing, it's best for you to be patient and allow yourself plenty of time (two hours minimum) for changing a headlight rather than racing to beat a new time record.
How much does it cost to replace a headlight assembly?
Take it to an auto repair shop, and you'll have to pay at least $250-$1000 in headlight assembly replacement cost. According to most aftermarket auto parts stores, replacing a single high-intensity discharge bulb can cost $100 or more, while the entire headlight assembly replacement cost is between $250 and $700.
How do you take a headlight out?
0:402:34How To: Replace a Car Headlight Bulb - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll want to detach the wire socket from the bulb. Just press the tab to release it. And pull onMoreYou'll want to detach the wire socket from the bulb. Just press the tab to release it. And pull on the socket. Be careful to pull on the socket. And not the wires.
What happens when you back up a white light?
White light when you back up - yup, they burn out and you can replace them with bright LEDs
Can you upgrade fog lights to LED?
Upgrade your fog lights to LED with a direct install option that will connect easily to your car’s existing bulb housing. Sylvania has an option with aviation grade aluminum body and a turbo cooled fan. Check out Sylvania LEDs.
How to remove blue headlight wire?
Locate the blue headlight wire. Use a flathead screwdriver to pry up one side of the clamping teeth and pull the connector off.
Do you over tighten screws when reinstalling?
When re-installing the screws do not over tighten. Over tightening the screws will result in stripped threads.
Can you remove the headlight assembly from a truck?
Now that all connections between the car and the headlight assembly are disconnected, it is safe to remove the headlight assembly from the truck.
1. One of the Headlight Not Working
This is practically one of the most common headlight issues with Dodge Rams. Have you ever come across cars with only one functional headlight? When you drive past such cars, it may look funny. But wait till the same ordeal happens to you.
2. Headlights Going On and Off Occasionally
If you have been driving your Dodge Ram for a while, your headlights may start misbehaving by going on and off without you touching the controls. If you check the bulbs and they are working just fine, this is usually caused by dirty connection plugs.
3. Flickering Headlights
Another common problem that you may face is flickering headlights. Every once in a while, if your headlights start to flicker, you should check the condition of the fuse.
4. Both Headlights Not Working
If both of your headlights are not working, that can signal a much bigger problem. As mentioned earlier, blown bulbs most likely won’t occur on both lights. However, it is important to first start by inspecting the bulbs.
5. High Beam or Low Beam Headlights Not Working
There are two main culprits in this scenario. It could either be a burned-out bulb or a faulty beam switch.
6. Dim Headlights
After a while, your car headlights can become dim. This usually isn’t a cause for concern because it’s a problem that you can fix.
Why Should I Fix Dodge Ram Headlight Issues Fast?
It’s quite obvious, without functional headlights, you can forget about driving at night. Let alone the dark, even during the day when there is a lot of rain, visibility is often compromised.