How to Remove a Toilet Seat
- Remove the old toilet seat from the base. You'll see two plastic caps at the junction of the seat and tank. In some Mayfair models, these caps can be pried off with a screwdriver. ...
- You'll find a plastic bolt fitted with a plastic nut under each of these caps. Remove the plastic nut. ...
- Pull out the plastic bolts and remove the old toilet seat.
Full Answer
How do I replace the toilet seat on my Mayfair?
First, remove the old toilet seat from the base. You'll see two plastic caps at the junction of the seat and tank. In some Mayfair models, these caps can be pried off with a screwdriver. In other cases, instead of coming off entirely, the bolt covers may have a "locked" and "unlocked" position. In this case, move the covers to "unlocked."
How do you remove an old toilet seat?
You'll find a plastic bolt fitted with a plastic nut under each of these caps. Remove the plastic nut. If it doesn't loosen by hand, use the adjustable wrench to remove each nut. Then, pull out the plastic bolts and remove the old toilet seat.
How to install a new toilet seat?
Remove the seat from the toilet. Collect the nuts, bolts, and any loose plastic or metal hardware (like the bolt covers) that also go with the seat. Put these small pieces into a sealable plastic bag and tape them to the seat so they don’t become lost. Your toilet seat is removed, now you can install a new one. [5]
How do you fix a loose nut on a toilet seat?
Some nuts may have a shape similar to a wingnut, allowing you to hold it in place by hand. If you have a weak grip, the nut is not wingnut-shaped, or the nut is stuck, try gripping it with a pair of pliers or vice grips. The fasteners of your toilet seat may be plastic.
How to clean rust off toilet seat?
What are hidden fixings on toilets?
How to prevent a toilet from scratching?
How to unwound wingnut on toilet?
What to do if you didn't cut well?
Can you remove a toilet seat with bolts?
Can you unscrew a seat with metal hinges?
See 2 more
How do I remove Mayfair toilet seat cover?
How to Remove a Toilet SeatRemove the old toilet seat from the base. You'll see two plastic caps at the junction of the seat and tank. ... You'll find a plastic bolt fitted with a plastic nut under each of these caps. Remove the plastic nut. ... Pull out the plastic bolts and remove the old toilet seat.
How do you remove a screwless toilet seat?
0:157:55How to Remove and Install a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to do is press the two quick release buttons to remove the seat. So push this oneMoreFirst you need to do is press the two quick release buttons to remove the seat. So push this one this one on some seats you need to hold it in while lifting.
How do you install a Mayfair soft toilet seat?
0:412:01Toilet seat Install (Mayfair, Bemis, Church) - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition there's a lock in an unlock make sure they're both unlocked place them over the the boltsMorePosition there's a lock in an unlock make sure they're both unlocked place them over the the bolts simply lock them in position and you're ready to go.
Why can't I unscrew my toilet seat?
If the bolt is brass or badly corroded steel, you might break it off, which is just fine. If the nut won't budge, douse it with a penetrating spray lubricant such as WD-40. Hold a rag behind the nut to catch the overspray. Give the lubricant 15 minutes to penetrate, then try again.
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
How do you change a toilet seat on an enclosed toilet?
0:171:40bathstore: How to replace a toilet seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow fit the toilet seat and adjust to fit centrally. Over the pan remove the seat and fully tightenMoreNow fit the toilet seat and adjust to fit centrally. Over the pan remove the seat and fully tighten the screws. Then put the stainless steel cover on the hinge.
Which way do toilet seat bolts turn?
If the seat is attached with a traditional metal bolt and metal nut, grab your socket wrench and fit it over the long bolt that grips the nut. Turn the nut counterclockwise to loosen.
Which way do toilet seat screws turn?
0:182:56Remove Toilet Seat - Replacing a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm going to turn it counterclockwise. And once it loosens up you should be able to grab it backMoreAnd I'm going to turn it counterclockwise. And once it loosens up you should be able to grab it back in.
Is Bemis and Mayfair the same?
bathroom products To sell seats in department, hardware and specialty chain stores, Bemis created a new product line and brand name known specifically for its style and design. The Mayfair brand was born, and the new line was marketed to housewares buyers throughout the Midwestern United States in the late 1950s.
How do you remove a toilet seat anchor?
0:442:11KOHLER Toilet Seat Anchor Kit 1461673 Replacement InstructionsYouTubeStart of suggested clipEnd of suggested clipPress the teeth of the stabilizer. Tool firmly against the anchor. And continue attempting toMorePress the teeth of the stabilizer. Tool firmly against the anchor. And continue attempting to unthread the bolt. If repeated attempts with the stabilizer.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do you unscrew a tight toilet screw?
0:301:46How to Get a Toilet With a Stuck Bolt Off the Floor : Toilet RepairsYouTubeStart of suggested clipEnd of suggested clipTake your wrench on the bottom side and twist them to loosen after it gets loosened you should beMoreTake your wrench on the bottom side and twist them to loosen after it gets loosened you should be able to go down there and loosen up with your hands if not just continue to work it with the tools.
How do you remove a toilet seat anchor?
0:442:11KOHLER Toilet Seat Anchor Kit 1461673 Replacement InstructionsYouTubeStart of suggested clipEnd of suggested clipPress the teeth of the stabilizer. Tool firmly against the anchor. And continue attempting toMorePress the teeth of the stabilizer. Tool firmly against the anchor. And continue attempting to unthread the bolt. If repeated attempts with the stabilizer.
How do you remove a quick release toilet seat?
Most modern toilet seats will have a quick release button to help you take it on and off easily. Press the button and lift the seat up. With a screwdriver, lift up the seat fixing caps to get to the bolts underneath.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
What is the easiest way to remove a toilet seat?
If you need to remove a toilet seat, use your fingers or a screwdriver to pry off the plastic covers at the back of the seat. Once you've exposed the screw that holds the seat in place, use your fingers or a pair of pliers to hold the nut in place, and unscrew the bolt with a screwdriver.
How to clean rust off toilet seat?
Take out the nuts and screws. Place them away as you wait to replace them. Put them in a plastic bag more especially if made with metal to avoid rust. Now take out the toilet seat and wipe down with a piece of cloth or paper towel.
What are hidden fixings on toilets?
Hidden fixings are common with modern toilets as people don’t want to see bolts on their toilets, plus it prevents them from damage. Look at the back of the toilet and check from underneath to see if you can spot screws. Again, they could be metal or plastic.
How to prevent a toilet from scratching?
Use your knife to cover the porcelain that is around the bolt head to prevent accidental scratches as you saw through. Secure the rest of the toilet with masking or duct tape as you don’t want to hack through any other part of the toilet. Cut through the bolt along with the hinges connected to the toilet seat.
How to unwound wingnut on toilet?
You could use a socket wrench to get a deeper , firmer grip on the metal hinges then use your hands to unwound the wingnut underneath the toilet. The socket should be about half an inch wide so it can fit over the bolts easily.
What to do if you didn't cut well?
For any area you didn’t cut well, use the knife to scrape it off.
Can you remove a toilet seat with bolts?
Depending on the type of toilet brand you have, the bolt s could be made from metal or plastic, some with bolts caps, some without. Nonetheless, the process of removal is similar. Take a look at a step-by-step guide on how you can remove a toilet seat.
Can you unscrew a seat with metal hinges?
Removing Seat with Metal Hinges. If the bolts securing the seats are made of metal, you could use a pair of pliers to unscrew them. But metal hinges have one disadvantage, they rust. This means that even the pliers may be unable to unscrew the bolt.
Who makes Mayfair toilet seats?
Bemis Manufacturing Company , known for quality and variety in toilet seats, created the Mayfair line specifically for homeowners to purchase at retail. The Mayfair line itself offers a variety of materials, colors and surfaces to match any sort of bathroom design scheme. Advertisement.
Why is my toilet seat lowered?
If your toilet has aged or the toilet seat is raised and lowered a lot, there's the possibility that the plastic bolts attaching the seat to the tank are worn or broken. You'll obviously want to pick up a new toilet seat and install it.
How long does it take for a toilet seat to rust?
Toilet Seat Installation. Sometimes old bolts can be rusted into place. If this is the case, use a rust penetrant and allow it to sit in place for five to 10 minutes. This usually works well enough to loosen the bolts for turning.
Where are the plastic caps on a Mayfair?
You'll see two plastic caps at the junction of the seat and tank. In some Mayfair models, these caps can be pried off with a screwdriver. In other cases, instead of coming off entirely, the bolt covers may have a "locked" and "unlocked" position. In this case, move the covers to "unlocked.".
Does the Mayfair toilet seat come with the same parts?
The new Mayfair toilet seat will come with the same parts, just brand new. There may be a sticker paper in the installation kit containing two sticky washers; if so, line them up with the bolt holes on the toilet itself and stick in place.
Does Mayfair have instructions for installing toilet seats?
There's likely to be an instruction sheet or installation guide included with the installation software package for the new Mayfair toilet seat. Depending on the model you choose, you may have slightly different pieces and parts. Always check the manufacturer's directions and suggestions before installation.
How to remove toilet seat?
It’s a good thing most toilet seats can be removed easily by unfastening their connecting nuts and bolts. Should the hardware fastening your seat resist your best efforts, detach the stubborn seat with a socket set, a hacksaw, or a drill. Prevent corrosion and make the next removal easier by maintaining the seat through regular cleaning and by replacing worn out parts.
How to fix a crack in a toilet seat?
Fill small cracks in wooden toilet seats with white or clear silicone to prevent buildup of bacteria. For large cracks, remove the seat and fit a new toilet seat in its place. Avoid using bleach to clean wooden toilet seats, as it can damage the wood as well as the metal hinges and bolts.
How to tighten a toilet bolt?
Rubber bushings can be bought at your local hardware store or home center. Slide the circular, rubber bushings up the threading side of the bolt with the tapered side of the bushing facing up at the toilet. Then tighten the nut with the tightening tool that came with the bushings.
How to break a toilet nut?
Some toilet designs may require a deep socket or socket extension for you to reach the nut. Turn the socket counterclockwise firm ly to break the nut loose. Apply steady moderate force with your socket wrench. If the nut doesn’t loosen, intensify the force on your wrench to high for a very short interval.
How to protect a toilet seat from scratches?
Take a broad knife, like a putty knife, and position it so it covers the porcelain of the toilet around the head of a bolt. This will protect against accidental scratches when you saw. Cut away at the hardware fastening the seat to your toilet a little bit at a time with the hacksaw. This process may take a while.
Why are the nuts on my toilet seat not sliding?
If the toilet seat isn't sliding around, the nuts are tight enough. You don't actually want to overtighten those nuts, since you may end up cracking the porcelain . If that happens, you're going to need to buy a new toilet!
Where are the bolts on toilet seats?
Open the bolt caps to gain access to the seat fasteners, if necessary. These are located at the back of the seat, where the seat hinges . Some toilets may not have plastic covers for the bolts. If yours does, open these covers by prying upwards on them with your finger or a screwdriver.
How to clean rust off toilet seat?
Take out the nuts and screws. Place them away as you wait to replace them. Put them in a plastic bag more especially if made with metal to avoid rust. Now take out the toilet seat and wipe down with a piece of cloth or paper towel.
What are hidden fixings on toilets?
Hidden fixings are common with modern toilets as people don’t want to see bolts on their toilets, plus it prevents them from damage. Look at the back of the toilet and check from underneath to see if you can spot screws. Again, they could be metal or plastic.
How to prevent a toilet from scratching?
Use your knife to cover the porcelain that is around the bolt head to prevent accidental scratches as you saw through. Secure the rest of the toilet with masking or duct tape as you don’t want to hack through any other part of the toilet. Cut through the bolt along with the hinges connected to the toilet seat.
How to unwound wingnut on toilet?
You could use a socket wrench to get a deeper , firmer grip on the metal hinges then use your hands to unwound the wingnut underneath the toilet. The socket should be about half an inch wide so it can fit over the bolts easily.
What to do if you didn't cut well?
For any area you didn’t cut well, use the knife to scrape it off.
Can you remove a toilet seat with bolts?
Depending on the type of toilet brand you have, the bolt s could be made from metal or plastic, some with bolts caps, some without. Nonetheless, the process of removal is similar. Take a look at a step-by-step guide on how you can remove a toilet seat.
Can you unscrew a seat with metal hinges?
Removing Seat with Metal Hinges. If the bolts securing the seats are made of metal, you could use a pair of pliers to unscrew them. But metal hinges have one disadvantage, they rust. This means that even the pliers may be unable to unscrew the bolt.