Remove push-lock hose with a soldering iron. That's right, instead of using a knife to do the job, take a soldering gun and put a plastic cutting tip on it. Next, bend it 90 degrees so it acts like a cutting blade.
How do you remove a push lock air hose?
0:512:09Arnott Minute: How to Remove and Replace Air Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor some parts you may be able to release the airline by simply pushing in on the fitting collar.MoreFor some parts you may be able to release the airline by simply pushing in on the fitting collar. And the line slides out easily. Others require you to remove the fitting with a wrench.
How do you remove a barbed fitting hose?
Soak the tubing in scalding hot water. If the tubing is in an area where the use of water isn't possible, heat the hose with a hair dryer. Twist the tubing back and forth until it pulls off of the barbed fitting. The heat will help expand and soften the tubing until it can be pulled off the barbs.
How do you change a push lock?
0:051:03How to Remove and Install a Push-In Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a flathead screwdriver. Then you will lift up the arm to dislodge the lock core. So that youMoreUsing a flathead screwdriver. Then you will lift up the arm to dislodge the lock core. So that you can insert your new one a little tip if you lift up on this locking arm.
How do you install a push lock hose fitting?
2:506:35How to Assemble Push Lock Hose - YouTubeYouTubeStart of suggested clipEnd of suggested clipThrough the tool as you're sliding the the fitting into. It. Now once you have the hose clamp downMoreThrough the tool as you're sliding the the fitting into. It. Now once you have the hose clamp down all you do is push put the hose end into the Chuck. And then start rotating the tool.
How do you remove a marine hose?
0:344:53How To Replace A Hose On Your Boat | BoatUS - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext we're going to undo the hose clamps. There's one up both ends I've already taken off the topMoreNext we're going to undo the hose clamps. There's one up both ends I've already taken off the top one we'll pull the hose. Clear. Put that to one side I have a new length of hose here.
How do you use hose removal pliers?
0:003:03Hose Remover Pliers Basics - a must-have automotive tool. - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the way it does it is you just kind of push the pliers on a little bit and as you can see I'mMoreAnd the way it does it is you just kind of push the pliers on a little bit and as you can see I'm not backing it up with my thumb or anything like that you just squeeze the handle.
How do you open a push lock from the outside?
0:002:32How To Pick A Bathroom Door Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's push button lock when you turn the knob the lot of the button pops out. So. So get intoMoreSo let's push button lock when you turn the knob the lot of the button pops out. So. So get into that one I've locked. It. Get into that one all you need to do is take a paper clip.
How do you remove an old filing cabinet lock?
0:091:11How to Remove & Install File Cabinet, Desk or Cubicle Lock CoresYouTubeStart of suggested clipEnd of suggested clipFirst you will need to take your normal key and turn your old lock court to the unlocked positionMoreFirst you will need to take your normal key and turn your old lock court to the unlocked position although there are a select few locks that must be in the locked position to remove.
How do you open a push lock file cabinet?
Move the filing tool up and down slightly 3-5 times. This moves the pins of the locks so you can easily open the cabinet. Most household locks have about 5 pins, and your key effortlessly moves these pins when you insert it into the lock. You must move these pins to unlock the cabinet.
Do push lock fittings need clamps?
One of its major advantages is that it uses no clamps or crimp sleeves to secure the fitting into the hose, which saves assembly time. The lack of clamps and crimp barrels also eliminates their sharp edges, a potential injury hazard during assembly.Apr 21, 2020
What is push lock hose?
What is Push-Lok Hose? Push-Lok hose, also called push-on hose, is used with field-attachable fittings for quick and easy 'field' assembly with no crimper required. It is commonly used on low pressure hydraulic and pneumatic systems and general industrial, maintenance, and automotive applications.
Does push lock hose need a clamp?
Anytime you use push-loc hose for a pressure application, hose clamps should be mandatory.Feb 20, 2010