- If your toilet seat doesn’t lift straight off, try tilting it forward just a few degrees and see if you can lift it off from that position.
- If you can’t slide the seat off the pegs, try pressing in the hinges with your thumbs and lifting it off. Different soft-close seats with peg-style hinge assemblies may have different locking mechanisms.
How do you remove a soft close toilet seat?
If you don’t see a plastic hinge assembly, your soft-close seat probably has metal peg-style hinges. Slide the seat forward from the down position to remove it. Leave the seat all the way down so that it is resting in the closed position on the toilet bowl.
Do you have to adjust the hinges on a soft close toilet?
If you can’t adjust the hinges on your soft-close toilet seat to make it close slowly and quietly again, you can replace the hinge dampers or the whole seat at a low cost. If the speed of your toilet seat is fine, but you want to tighten the seat to stop it wobbling around, you don’t need to adjust the hinges.
How do I know if my toilet seat is soft close?
Look for rectangular plastic pieces that come off the back of the toilet seat, which cover the bolts in the toilet bowl that the seat’s hinges clip onto. [8] If you don’t see a plastic hinge assembly, your soft-close seat probably has metal peg-style hinges. Slide the seat forward from the down position to remove it.
How do you adjust the speed of a soft close toilet?
Depending on the specific soft-close toilet seat you have, there might be 2-3 different positions you can set the dampers in to control the speed of the seat. Slide the hinge dampers back into the hinge assembly. Push the cylindrical damper back into the hole in the hinge assembly on one side.
How to slide a Kohler toilet seat backwards?
What is a soft close toilet seat?
How to get a toilet seat off?
Can you use a wrench to remove a toilet seat?
Do you need to bend a wingnut to remove a toilet seat?
Do soft close toilet seats last forever?
See 1 more
How do I remove a concealed hinge from a toilet seat?
0:157:55How to Remove and Install a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you need to do is press the two quick release buttons to remove the seat. So push this oneMoreFirst you need to do is press the two quick release buttons to remove the seat. So push this one this one on some seats you need to hold it in while lifting.
How do you take apart a toilet hinge?
The metal bolts are part of the toilet seat hinge hardware. Simply unscrew the nut from the attached bolt. Corroded bolts and nuts are harder to detach. To remove the nut from the seat hinge bolt, use a long socket and socket wrench to unscrew the nut.
Can you replace soft close on toilet seat?
Tip: If your soft-close toilet seat's hinges are not adjustable, you can replace them with a new set, which costs less than $15 USD, to make your seat work like new again. You could also replace the entire seat for around $50 USD or less. Use your fingers to push the hinge dampers back into the hinge assembly.
How do soft close toilet seat hinges work?
A slow close toilet seat is basically one that closes on its own as soon as you start to push it down. What is this? Gravity controls it but special, tensioned hinges control the gravity. This is where the slow part comes in so there's no slamming down.
What are the different toilet seat hinges?
There are two main types of hinge fixings, top fixing and bottom fitting, and it is worth noting that not all hinges are suitable for all toilets. Bottom fixing toilet seat hinges feature a traditional style fixing which includes fitting two bolts down into your pan and then tightening them from underneath.
How do you remove a toilet mounting nut without a wrench?
One of the best ways to remove a difficult lock nut is by using plumber's grease. Simply apply the plumber's grease to lubricate the plastic nut, then let it sit for 10 to 15 minutes. Once that has sat for a while, attempt to remove it using your hands or a pair of pliers.
Why can't I unscrew my toilet seat?
If the bolt is brass or badly corroded steel, you might break it off, which is just fine. If the nut won't budge, douse it with a penetrating spray lubricant such as WD-40. Hold a rag behind the nut to catch the overspray. Give the lubricant 15 minutes to penetrate, then try again.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do you fix a Kohler soft close toilet seat?
0:091:37Hinge and Damper Replacement - Quiet-Close Toilet Seats - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull up on the bottom cover to remove. Next take your needle nose pliers. And pull each damperMoreAnd pull up on the bottom cover to remove. Next take your needle nose pliers. And pull each damper inward to release the hinge assembly from the toilet seat.
Do soft close hinges wear out?
When a soft-close hinge has stopped working, it's most likely due to one of the screws becoming loose. This will cause the hinge to come out of place or allow the door to sag down. To repair this, all you need to do is find the loose screw and tighten it with a screwdriver.
Can you replace the hinges on a toilet seat?
Over time, these hinges can break or wear out, requiring replacement. If your toilet seat hinges are broken or stripped out, you do NOT need to change the whole toilet seat, but instead only the hinges. With the right tools and spare parts, you can easily replace your toilet seat hinges.
How does soft close mechanism work?
Soft close is a premium feature that is available on certain types of drawer slides. It allows drawers to close silently and smoothly. When you close a drawer or cabinet with this feature, just before it's completely shut, the soft close mechanism takes over and closes the drawer or cabinet the rest of the way.
Why can't I unscrew my toilet seat?
If the bolt is brass or badly corroded steel, you might break it off, which is just fine. If the nut won't budge, douse it with a penetrating spray lubricant such as WD-40. Hold a rag behind the nut to catch the overspray. Give the lubricant 15 minutes to penetrate, then try again.
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
How do you remove the hidden repairs on a Kohler toilet?
0:442:11KOHLER Toilet Seat Anchor Kit 1461673 Replacement InstructionsYouTubeStart of suggested clipEnd of suggested clipUsing a phillips screwdriver unthread the bolts holding the toilet seat in place. If the anchorMoreUsing a phillips screwdriver unthread the bolts holding the toilet seat in place. If the anchor spins and the bolt cannot be unthreaded. Press the teeth of the stabilizer.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How to Remove a Soft Close Toilet Seat?
The way that you remove a soft close toilet seat will vary by manufacturer, but I am guessing you are here because the fixings are concealed, and you have been unable to locate them under the pan.
What to do if your toilet seat stops closing?
If you think your hinges are getting worn and the toilet seat has stopped soft closing, you can try adjusting them before having to go out and get replacements.
How to stop a toilet seat from slamming?
The only way to truly prevent the slamming of a toilet seat is to install a soft close toilet seat. Soft close toilet seats are designed with a dampening mechanism that means the seat closes very slowly, therefore, preventing slamming.
What is hydraulic assisted closure?
A hydraulic-assisted closure will have its own reservoir of compressed air or grease which will push against a piston and force it to extend, gradually lowering the weight attached to the other end.
Can you buy soft close hinges for toilet seats?
You are able to purchase soft close toilet seat hinges that may fit your particular seat although there are so many different manufacturers that this may not be easy. To save time, you may want to just buy a new seat.
Can you bang your toilet seat?
No slamming and banging of your toilet seat also keep the seat and toilet bowl protected from damage that could occur over time.
Can a soft close toilet seat hurt your fingers?
With a soft close toilet seat, you won’t have to worry about the seat accidentally dropping and landing on their little fingers causing injury.
What is a clip on hinge?
Plastic clip-on hinge assemblies are the second main type of hinge assemblies that soft-close toilet seats can have. Look for rectangular plastic pieces that come off the back of the toilet seat, which cover the bolts in the toilet bowl that the seat’s hinges clip onto.
Why adjust soft close hinges on toilet seat?
The only reason you would need to adjust soft-close hinges is if your soft-close seat is not closing at the right speed. ...
How to install a soft close seat?
Place the soft-close seat upside-down on a flat surface. Flip the seat over so that the hinge assembly is exposed. Lay it down on a flat surface with the hinges facing you.
What type of hinges are used on a soft close toilet?
Metal peg-style hinges are 1 of the 2 main types of hinge assemblies that soft-close toilet seats may use. Look for metal pegs coming up from round plates attached to the back of the toilet bowl, which the hinges on the toilet seat slide onto.
How many positions can you put dampers in a toilet seat?
Depending on the specific soft-close toilet seat you have, there might be 2-3 different positions you can set the dampers in to control the speed of the seat.
How to remove a toilet seat that is unable to slide off?
If you are unable to slide off the toilet seat, you might have to unscrew the bolts from underneath on the back side of the toilet bowl to remove it . Soft-close toilet seats with clip-on hinge assemblies can have slightly different attachment methods, depending on the specific make and model.
How to get a seat off a peg?
If you can’t slide the seat off the pegs, try pressing in the hinges with your thumbs and lifting it off. Different soft-close seats with peg-style hinge assemblies may have different locking mechanisms.
How Do Soft Close Toilet Seats Work?
So How Do Soft Close Toilet Seats Work? Soft close toilet seats work with the help of hinges located in the toilet seat bearings and allow them to close slowly and quietly. Some hinges can be adjusted to close even more slowly. If the hinges are worn, the toilet seat will not function properly, and you will need to replace them.
What Is a Slow Close Toilet Seat?
A slow close toilet seat is a toilet seat model that closes very slowly on its own after you push it down. The reason it closes so slowly is because of the tensioned hinges that are built into its holders. That way the toilet seat will close slowly and there will be no slamming down.
Why are slow close toilet seats more sanitary?
Did you know that slow-close toilet seats are more sanitary? The reason for this is because these seats have less contact with bacterias than normal toilet seats. That’s because it is not necessary to touch them so much with your hands, you just push them a little, and they go down on their own. They can also be easily changed, which is also an advantage.
Why does my toilet seat close so slowly?
The reason it closes so slowly is because of the tensioned hinges that are built into its holders. That way the toilet seat will close slowly and there will be no slamming down.
How to fix a toilet seat that won't work?
Just remove the toilet seat and hinges. Use the soak in warm, soapy water for around 30 minutes. This should break up and dissolve the crud that causes your toilet seat not to work properly. If you notice cracks in the hinges, you need to replace your toilet seat hinge.
How to close a soft close toilet seat?
By using a light tap, you will activate its closing system to go down and close. This process takes a few seconds, where the seat and lid will come down and close. The great thing about these soft-close toilet seats is that they are so quiet that you will virtually hear no sound as their come to their closed position.
How long do toilet seats last?
Soft Close Toilet Seats generally last for 5 or more years. The slow-close action on the toilet seat can last up to 30,000 to 50,000 repetitions if they are properly maintained and cleaned. However, the problem that can occur is if the particles accumulate within the hinge, and they can prevent the slow-close action on your toilet seat.
David Corkindale New Member
I have the job of trying to remove the fittings for an existing soft-close, top-fix, toilet seat.
terrymac Screwfix Select
The top of the " bung" is a wider diameter than all below. The screw threads into a cone shaped nut ,which is captive within the bung. When turning the screw clockwise it draws the coned nut up thus expanding the rubber bung ,which grips the inside of the hole in the pan. To remove ,the screw locates Into the nut ,one turn.
David Corkindale New Member
Thanks 'terrymac' for your quick reply - I'll give it another try today.
DIYDave. Screwfix Select
As above, cone nut traveling up on thread expands bung, etc. It’s pretty much like a hollow wall fixing
David Corkindale New Member
Thanks for another helpful reply. Yes, the toilet is the closed type with no access to fittings from the underside.
How to slide a Kohler toilet seat backwards?
Other brands like Kohler toilet seats you will only need to slide the seat backwards only. Take your screwdriver and engage the top of the bolt. Using your other hand, reach for the wingnut underneath the toilet bowl. Hold the wingnut with your hand as you unscrew the bolt with the screw driver.
What is a soft close toilet seat?
Most soft close toilet seats are a combination of either top-mount and quick-release mechanism or bottom-mount and quick-release mechanism. Standard soft close toilet seats have no quick-release mechanism and are fixed from the bottom. The top-mount unlike the bottom-mount soft close toilet seats gives the persons removing or installing them ...
How to get a toilet seat off?
Lift the toilet seat at 90 degrees to the toilet and simply lift it off. For some models of toilet seats you may need to push one or two buttons in order for the seat to release. The mounting base is covered with a plastic cap matching the color of the seat or one made of chrome. Pry it out.
Can you use a wrench to remove a toilet seat?
If the bolt and nut are metallic and corroded, you should use a wrench to make it loose. Once the bolts are out lift off the toilet seat. This is also how you would need to remove this toilet seat if you wanted to clean it. The quick-release toilet seats were designed to solve this problem.
Do you need to bend a wingnut to remove a toilet seat?
You don’t need to bend to screw in a wingnut from under neath the bowl. The quick-release soft close toilet seats to make are desirable for sanitary purposes. It is easy and quick to remove the toilet seat while cleaning. You just push a bottom or two for that matter and slide the seat out.
Do soft close toilet seats last forever?
Soft close toilet seats are a very welcome innovation given how irritating toilet seat slamming can be. It is unfortunate that just like the non-soft close toilet seats they don’t last forever. At one time you will need to replace them. Knowing how to remove a soft close toilet seat helps.
