How to remove throttle cable from carburetor:
- Step 1 Identify the place where you can find the throttle cable. ...
- Step 2 Turn off the fuel valve on the fuel tank. ...
- Step 3 Loosen the clamps screw of the carburetor. ...
- Step 4 After you have unscrewed the locknuts, it’s time to unscrew the 3 Phillips head screws on the throttle body.
- Step 5 Distinguish the cable from the plastic armor called throttle body. ...
How to open a butterfly throttle cable?
How to get a little ball out of a cable?
What is the function of a carburetor?
Can you remove throttle cable?
How do you disconnect a throttle cable?
0:021:11Removing Throttle Cable from Throttle Body - YouTubeYouTubeStart of suggested clipEnd of suggested clipBody what I normally do is I take a ballpoint pen like this push down on the throttle arm here getMoreBody what I normally do is I take a ballpoint pen like this push down on the throttle arm here get underneath the cable. Move it all the way to the end like this just pop the cable right off.
How do you change a throttle cable?
Step 1: Locate the throttle cable. ... Step 1: Disconnect the throttle cable at the throttle body. ... Step 2: Disconnect the throttle cable from the retaining bracket. ... Step 3: Pull the throttle cable through the firewall. ... Step 4: Disconnecting the throttle cable from the accelerator pedal.More items...•
How do you remove a throttle cable from a slide?
2:2611:33How To Replace a 2 Stroke Throttle Cable - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow to get the cable out of the slide we need to pull the spring. Up. Then we need to grip theMoreNow to get the cable out of the slide we need to pull the spring. Up. Then we need to grip the throttle cable as high as we can. Right here like so so we'll take and push. The slide up. And out.
How do you hook up a throttle cable to a carburetor?
0:567:18(2)- CARB THROTTLE CABLE INSTALL EASY (end) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou see the line it hooks and all these carburetors exactly the same it hooks in a little tiny slotMoreYou see the line it hooks and all these carburetors exactly the same it hooks in a little tiny slot on the bottom. See. Now watch after you get it in there. You can see it's in there see.
Is throttle cable and accelerator cable the same?
Your car's accelerator cable, also known as a throttle cable, is a braided metal wire that connects the gas pedal to the engine throttle plate.
Why is my throttle cable not snapping back?
If the throttle does not completely return the cable may be binding, incorrectly routed, frayed, or corroded, which warrants further investigation. With the bike OFF, twist the trottle open to the stop and let go. Make sure the throttle returns to the closed position quickly and easily.
How do you remove the throttle cable on a Mikuni carb?
1:035:04Throttle Cable Removal Mikuni TM28 Flatside - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i use my fingers on my left hand to pull the spring. Back. And then i'll hold. It. Like thatMoreAnd i use my fingers on my left hand to pull the spring. Back. And then i'll hold. It. Like that then you have this little green plastic tab that has to come out. So it's the cable retainer.
How do you remove a throttle tube from a motorcycle?
1:162:24How to remove the throttle tube from inside a handle bar grip - YouTubeYouTubeStart of suggested clipEnd of suggested clipGrip hit us as hard as it can go and what you're gonna have to do that's hot what you have to do isMoreGrip hit us as hard as it can go and what you're gonna have to do that's hot what you have to do is wiggle it left and right. And just keep wiggling it. And eventually it'll come off the grip.
How do you install a throttle tube?
1:222:54How To Install the Tusk Aluminum Throttle Tube - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd give it a little tap with a hammer to seat that sail bearing. Doing this is going to allow theMoreAnd give it a little tap with a hammer to seat that sail bearing. Doing this is going to allow the tube to rotate freely on the handlebar. Now we can reinstall the throttle cables.
How do you install a throttle cable on a Holley carburetor?
1:472:35Attaching Early GM Throttle Linkage To Holley Carbs - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith a model 41 65 or 4175 carburetor once the correct cable mounts installed insert the cableMoreWith a model 41 65 or 4175 carburetor once the correct cable mounts installed insert the cable housing into the bracket to attach the cable to the throttle lever.
How do you hook up a motorcycle throttle cable?
0:082:59How to Install a Motorcycle Throttle with 2 Cables (4 Stroke) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there is one cable goes one way in this instance the cable goes you slide it into the cutoutMoreAnd there is one cable goes one way in this instance the cable goes you slide it into the cutout rotate the throttle around. You bring the other one.
How do you install a throttle needle?
2:113:25How to change the throttle needle - a Dellorto Carb still on the bikeYouTubeStart of suggested clipEnd of suggested clipAnd then the next thing to do is to put the needle in. So what I do is I compress the spring again IMoreAnd then the next thing to do is to put the needle in. So what I do is I compress the spring again I flip it over the top of the carb like that so you can see we're over the top of the slide.
How much does it cost to replace a throttle cable?
If it's necessary, get a throttle cable repair as soon as possible, or at least avoid driving until you can visit the mechanic. This service typically costs between $200 and $300.
How do you connect a throttle cable?
0:022:59How to Install a Motorcycle Throttle with 2 Cables (4 Stroke) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there is one cable goes one way in this instance the cable goes you slide it into the cutoutMoreAnd there is one cable goes one way in this instance the cable goes you slide it into the cutout rotate the throttle around. You bring the other one.
When should I replace throttle cable?
Replacing your throttle cables. If your inspection reveals any damage, you'll need to replace your throttle cables. You might also need to replace them to accommodate a different handlebar.
How do you install a throttle tube?
1:222:54How To Install the Tusk Aluminum Throttle Tube - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd give it a little tap with a hammer to seat that sail bearing. Doing this is going to allow theMoreAnd give it a little tap with a hammer to seat that sail bearing. Doing this is going to allow the tube to rotate freely on the handlebar. Now we can reinstall the throttle cables.
How to Install & Remove Your Amal Carburetor Throttle Cable
This DIY Tech Tip by Lowbrow Customs shows you how easy it is to remove or install your Amal Carburetor throttle cable, commonly found on British motorcycles such as Triumph, BSA and Nortons. This is a simple operation but one that is of confusion to many new British motorcycle owners.
How to Make Your Throttle Cable Fit Amal Carburetor
This is a simple piece of advice but can be helpful. Most new throttle cables you can get for your British motorcycle have cable stops that are too large to fit in the adjuster that is found on the top of the Amal carburetor. There is a simple fix shown here that will keep you from having
Tyler Malinky
Tyler Malinky is the CEO of Lowbrow Customs, which he founded back in 2004. An avid vintage motorcyclist, Tyler builds and races 1950's Triumph motorcycles at the Bonneville Salt Flats, in addition to building and riding both stock and custom Harley-Davidson's on the street.
Claude Kayser
An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
How do I remove throttle cable on 2002 dyna super glide
REMOVAL Loosen the cable adjuster jam nuts, screw the throttle cable adjuster until it is as short as possible, remove the two screws that hold the handlebar housing together to separate the upper and lower housings, unhook the ferrules and cables from the throttle grip and lower housing, remove the air cleaner assembly and disconnect the throttle cables from the carburetor, pull the cable from the housing by placing a drop of oil on the retaining ring that holds the cable in the housing, then firmly pull the bent tubing portion of the cable out of the housing using a rocking motion.
How to replace throttle cable 2000 electra glide
To replace the throttle cable, first loosen the adjustment on both cables getting as much slack as possible in both cables. Then remove the two screws that hold the right switch housing together. Carefully separate the two halves of the switch housing. Work the cable out of their slots in the throttle sleeve.
Engine Rev goes too high while starting
have tried lubricating the throttle cable and twist grip mecanism , is the cable routed correctly and no kinks in it ? where the carb fits to the engine check the rubber mount has no cracks or holes as it will draw more air than needed !
My thottle cable broke how to fix
remove seat and gas tank. remove air box and related parts to be able to access the throttle body of the carburetors. open the hand grip casing on the handle bar and loosened the adjustment on the cables, then separate the hand grip from the plastic casing.
Throttle snapped, how to replace throttle on 2000 harley sportster 1200?
To replace the throttle cable, first loosen the adjustment on both cables getting as much slack as possible in both cables. Then remove the two screws that hold the right switch housing together. Carefully seperate the two halves of the switch housing. Work the cable out of their slots in the throttle sleeve.
Where is the carb on a jeep grand cherokee 1993 4.0 liter
There is no carburetor on any of the 6 cylinder or 8 cylinder Jeep Grand Cherokees. They have Fuel Injection and a throttle body which looks like a carburetor scaled down.
How to open a butterfly throttle cable?
The throttle cable is tied to a gold plug under the cover plate. Using your fingers, raise the portion where the cables are tied. That’s the area that makes the butterfly to open.
How to get a little ball out of a cable?
Exert pressure on the cable by turning it until the little ball comes out.
What is the function of a carburetor?
It creates a perfect blend between the fuel and air. Key functions of the carburetor include controlling the engine speed and regulating fuel and air ratio.
Can you remove throttle cable?
Removing the throttle cable isn’t as easy as it sounds. It requires some skill, otherwise, it’ll be ruined. Naijauto.com is here to guide you through it.