- Turn the stopper and push it down into the sealed and locked position.
- Turn the knob on top of the stopper counter-clockwise and remove it. ...
- Insert a screwdriver into the center of the drain stopper and unscrew the threaded insert. Some inserts may require an Allen wrench to remove them, instead of a screwdriver.
- Remove the insert, and then lift the stopper clear of the drain. The drain is now accessible for cleaning.
How do you remove the stopper from a drain plug?
Rotate the flat tip of the screwdriver counter-clockwise to unscrew the screw and release the stopper from its position in the drain. You don’t have to remove the screw from the stopper, it simply has to be loose enough to lift. Pull the plug assembly out of the drain.
How do I remove the toe touch drain stopper?
The toe touch drain stopper is just as easy to remove as it is to use. Before uninstalling the stopper, make sure it’s in the open position. Twist the cap counterclockwise to remove it. The cap is a silver top that says "push.” A slotted screw is underneath it at the center. Use a flat-head screwdriver to loosen the stopper by removing the screw.
How does a drain stopper work on a car?
This drain stopper has a little handle on the top of the cap that you can twist to open and close the drain. The cork goes down and seals as you turn it a single way, and it lifts and opens. This channel plug has a middle setscrew that winds into a thread drain crossbar. The set screw sits underneath the plug top cap.
How do you remove a trip level drain stopper from a tub?
Use a screwdriver to loosen the screws on the overflow grate and remove the grate from the tub or sink in order to access the trip-level drain stopper assembly. Make sure to put the screws in a safe location for reinstallation.
How do you remove twist and pull drain stoppers?
0:401:49How to remove a lift and turn stopper - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell try not to loosen the the top of it. But as you rotate counterclockwise the stopper itself willMoreWell try not to loosen the the top of it. But as you rotate counterclockwise the stopper itself will loosen from its base as you'll see here.
How do you remove a twist drain plug?
0:061:38How to Remove any Bathtub Stopper, Pop-up, Grate, or Plug - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt it'll sometimes be a set screw right here you'll take your screwdriver loosen that screw. AndMoreIt it'll sometimes be a set screw right here you'll take your screwdriver loosen that screw. And then this part will separate from the metal bar. And you just unscrew that metal bar.
How do you remove a lift and turn stopper without a screw?
1:133:16Remove Pop-up Stopper-No Set Screw - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou're gonna pull it up just enough to where you can grab hold of this larger. Piece then you'reMoreYou're gonna pull it up just enough to where you can grab hold of this larger. Piece then you're gonna unscrew this larger piece you felt it give there. And you unscrew this larger.
How do you remove the twist from a shower drain?
0:261:38How to Remove a Pop Up Shower Drain to Unclog Hair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd use the channel locks players in the bottom part of it. And then vice grips on the top. Put thisMoreAnd use the channel locks players in the bottom part of it. And then vice grips on the top. Put this guy on and hold the bottom tight with the pliers. And then this thing basically screws off the top.
How do you remove a twist plug from a bathtub?
0:346:53Twist pop up bath waste plug - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you want to get in a screwdriver a Phillips one or a flathead. And just open that screw up.MoreSo you want to get in a screwdriver a Phillips one or a flathead. And just open that screw up.
How does a lift and turn stopper work?
A lift-and-turn drain stopper has a small knob on the cap, which is used to twist the stopper open and closed. It's closed by turning the knob until it goes down, and it's opened by lifting and turning the knob in the opposite direction.
How do you clean a lift and turn bathtub drain?
1:074:11Cleaning a Bathtub Drain with a lift-and-turn stopper - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just screwdriver for that there's a little slot in here just stick the screwdriver in to turn itMoreAnd just screwdriver for that there's a little slot in here just stick the screwdriver in to turn it just keep turning until the shaft inside the stoppers loose.
How do you remove a shower drain cover that has no screws?
0:342:05How To Easily Remove Shower Drain Cover & UNCLOG ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne get yourself some wd-40 spray it around the rim of the drain. Let it sit for about 15 minutes orMoreOne get yourself some wd-40 spray it around the rim of the drain. Let it sit for about 15 minutes or so and then get yourself some pliers that fit into these holes in the drain.
How do you remove a toe touch drain stopper?
0:002:07How To Replace A Bathtub Drain Stopper (Toe Touch) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe main part of the drain stopper. So I'm going to use the screwdriver to loosen it just like thatMoreThe main part of the drain stopper. So I'm going to use the screwdriver to loosen it just like that and once it has been loosened. I can unscrew it using my hand just like that.
How do I remove the stopper from my bathroom sink?
0:161:58Removing a Sink Drain Stopper to Unclog it - Mikes InventionsYouTubeStart of suggested clipEnd of suggested clipYou need to loosen the nut. So you can remove the rod and dust the stopper. This little clip at theMoreYou need to loosen the nut. So you can remove the rod and dust the stopper. This little clip at the end comes off when you pinch it and slide it off the end of the rod.
How do you remove a stopper from a bathroom sink without a pivot rod?
In this case, you can sometimes skip removing the stopper altogether.Place a bucket under the P-trap.Unscrew the connectors on each end of the P-trap. Use pliers if they're tight.Pull out the P-trap and look for clogs. ... Check the P-trap itself for clogs. ... Reassemble the P-trap and sink stopper if applicable.
How do you remove a push plug?
Push and Pull With the stopper in the open position, unscrew the knob from the stopper base. Push the stopper closed to reveal the center post. Use pliers or a flat-head screwdriver in the center to loosen the slotted screw inside the center post in a counterclockwise direction. Lift the stopper from the drain.
How do you remove a toe touch drain stopper?
0:002:07How To Replace A Bathtub Drain Stopper (Toe Touch) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe main part of the drain stopper. So I'm going to use the screwdriver to loosen it just like thatMoreThe main part of the drain stopper. So I'm going to use the screwdriver to loosen it just like that and once it has been loosened. I can unscrew it using my hand just like that.
How do drain stoppers work?
Flip-it drain stoppers are a style of stopper that uses a flip lever to expand or contract a gasket that sits inside the drain. When the flip lever is in the open position the gasket is contracted, allowing water to flow into the drain, but when the flip lever is in the closed position, the gasket is squeezed, expanding to fill the drain and create a seal in the tub or sink. These drain stoppers are only secured by an O-ring that sits inside the drain at the base of the device, so they are fairly simple to remove.
Where is the trip lever on a drain stopper?
These drain stoppers have a lever that is located on the overflow faceplate. This lever is connected to a rod assembly that drops down vertically through the overflow drain and operates a plunger. By tripping the lever, or sometimes by rotating the lever, the plunger will move up or down.
Why do we need drain stoppers?
Bathtubs and sinks commonly use drain stoppers to effectively plug the drain and keep water, soap, and other common substances from flowing down the drain. These innovative devices take the place of traditional plugs that are prone to tearing, warping, and even getting lost if they aren't kept securely fastened to the tub or sink. However, while drain stoppers may be an improvement, they still have some shortcomings that need to be monitored and addressed by users.
Why does my bathtub drain stopper not hold water?
When a bathtub drain stopper fails to hold water when closed, or when the tub drains too slowly when the stopper is in the open position, the culprit is usually a hair or soap buildup on the stopper, or a stopper that is worn out and in need of replacement. Removing the stopper is the first step to addressing these problems.
What is a toe touch drain stopper?
Perhaps the simplest stopper of them all, toe-touch drain stoppers are spring-loaded devices that operate with a simple push of your toes. One push down closes the stopper; the next toe-touch allows it to spring up again. These stoppers are very easy to remove and clean.
What are the different types of drain stoppers?
There are several different types of drain stoppers, including lift-and-turn, push-and-pull, toe-touch, flip-it, trip-lever, and pop-up. While many models have a similar removal method, it's a good idea to learn the specific process for the type that is installed in your tub or sink to avoid damaging the drain stopper and the surrounding plumbing.
When to remove a bathtub drain stopper?
Removing the stopper is the first step to addressing these problems. You may also need to remove the stopper when working on the drain, such as when replacing the drain strainer body, or when addressing a clog . There are many styles of bathtub drain stopper, and the techniques for removing them for cleaning or replacement varies quite a bit ...
How to remove drain stopper assembly?
Flip or rotate the faceplate until the plug is in the open position. Opening the drain will allow you to remove the drain stopper assembly. If the drain stopper were closed, you would not be able to pull it out all the way through the hole behind the faceplate.
How to get water out of a stopper?
Grasp the stopper while it is in the open position. Pop the stopper up so that water could flow through it, and then grab the cap firmly with your hands or a pair of pliers. You can also press down on the metal ring that the stopper is pressed into when depressed for extra grip.
How to get stopper cap off?
Use your fingers or pliers to twist the stopper cap counter-clockwise. The metal cap will pop off after a few twists if you are using enough force. If it just rotates without unscrewing, try pulling up vertically as you twist.
What is a press flo stopper?
So-called “Flip-It” and “Press-Flo” stoppers are both brand-name bathtub drain stoppers that can be removed quickly and easily. These stoppers are fixed in place by an o-ring that prevents them from slipping into the drain, and can simply be pulled out.
Where is the overflow drain located?
Look for a control on the overflow faceplate of the bathtub. Usually located below the tub spout, the overflow drain may have a trip lever or the ability to twist. This mechanism is attached to an arm or cable feature that opens and closes the drain stopper. There is typically a grate over the drain with this set-up.
What is a toe touch stopper?
This kind of stopper is called a toe-touch stopper, since you can simply press on it with your foot to open and close it . Toe-touch stoppers are one of the simplest to use, but they can be difficult to remove without the right approach. ...
How to get a press flo plug out?
Use a suction cup to pull a “Press-Flo” stopper out. This brand-name plug most likely came with a perfectly sized suction cup for you to use, but it may have gotten lost over the years. Any small suction cup will be able to latch onto the stopper when you press on the center. Just pull up on the suction cup to pry the plug out of the drain.
What to do after you remove a bathtub drain stopper?
What to Do After You Remove the Bathtub Drain Stopper. Now that you know how to remove bathtub drain stoppers of all kinds, it’s time to figure out why your drain is slow. Once the bathtub stopper has been removed, use a flashlight to peer into the drain. If your bathtub’s draining slowly, there may be a build-up of hair, ...
How to rotate a strainer stopper?
Lifting the stopper, slowly rotate it counter-clockwise, aligning the slot at the bottom of the channel with the pin on the strainer.
What screwdriver to use to unscrew cylinder?
In some cases, you may need to use a standard flathead screwdriver to unscrew the cylinder from the strainer crossbar.
How to hold a stopper in place?
With the stopper in the open position, use one hand to hold the body of the stopper in place.
How to remove a cylinder base?
Try holding the base of the cylinder while turning the top cap counter-clockwise. If the entire unit moves as you turn, let go of the cylinder base and continue to unscrew until you can remove the unit completely.
Why is my bathtub draining slowly?
Have you noticed that your bathtub is draining slowly? If water is pooling at your feet every time you take a shower, you likely have a clogged drain. Removing the drain stopper will help you get a closer look at whatever is causing the problem. It’s also important to know how to remove a bathtub drain stopper if it isn’t properly placed. A stopper that isn’t flush with the bottom of the tub when it’s engaged may not hold water very well, making bath time a hassle.