How to Remove a Whirlpool Microwave Above a Stove
- Open the cabinet doors above the microwave and disconnect the cable from the wall socket.
- Have your assistant brace the microwave as you locate and extract the two screws inside the cabinet that hold the microwave up.
- Lift the microwave off the hooks on the bottom of the mounting plate and place the microwave on the countertop or the floor.
How do you remove an over the range microwave?
Remove the Microwave. The first step required to remove an over-the-range microwave is to loosen and remove the two mounting screws in the overhead cabinet. The screws are about 3 inches long and are either a Phillips-head or hex-head screw.
How to install a microwave oven?
Rotate the appliance upward and push it against the mounting plate. Hold this position in place. With your helper holding the microwave insert the provided bolts through the upper cabinet and into the microwave oven. Secure the appliance and tighten bolts as needed. Plug in your microwave and clear the workspace.
How do you mount an over-the-range microwave?
Most over-the-range microwaves use the same or similar method to mount the appliances. Wall brackets combined with mounting screws driven through the bottom of the overhead cabinet support the appliance. Because the appliance is heavy and awkward, an extra set of hands is recommended to avoid damage to the microwave and surrounding areas.
How do you disconnect a hardwired microwave?
Before disconnecting a hardwired microwave, turn off the power supplying the microwave at the main breaker box. Verify that the electric is off using a noncontact voltage meter. Separate the wires in the junction box by removing the wire nuts and untwisting their ends with a pair of electrician's pliers.
How do you remove a Whirlpool microwave over the range?
0:001:44How to remove a Microwave Oven - YouTubeYouTubeStart of suggested clipEnd of suggested clipTrack that's screwed to the wall. So once we undo these two screws. It's going to fall forward likeMoreTrack that's screwed to the wall. So once we undo these two screws. It's going to fall forward like that so before you do that you're going to want to unplug it. And also take out the tray.
How do you remove an above the stove microwave?
Remove the front cover of the microwave just above the door to access the holding rods. You'll see one on either side of the body of the appliance, at the top. Loosen each rod with a screwdriver to allow the microwave to pivot, then lower the front of the microwave to disengage it from the bracket and pull it out.
How do I remove a built in Whirlpool microwave?
9:1815:01Whirlpool Microwave Disassembly – Microwave Repair Help - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf still in place remove the glass turntable and support now tip the microwave. So it rests on itsMoreIf still in place remove the glass turntable and support now tip the microwave. So it rests on its back panel. And remove the bottom panel by using a Philips head screwdriver to unthread the mounting.
How do you install a Whirlpool microwave over the stove?
6:588:32Whirlpool Over The Range Microwave Installation (Model WMH73521CS)YouTubeStart of suggested clipEnd of suggested clipHalf the assistant hold the microwave in place as you thread the mounting bolts through the upperMoreHalf the assistant hold the microwave in place as you thread the mounting bolts through the upper cabinet and into the top of the appliance. Tighten the bolts but avoid over-tightening.
How do you replace a microwave range hood?
0:016:10How to install a microwave (and remove a range hood) - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's as simple as backing out four screws. Well in my case three screws. And the range hood justMoreIt's as simple as backing out four screws. Well in my case three screws. And the range hood just comes right. Down. Now since the range hood is hardwired in and the microwave comes with the plug.
How heavy is an over the range microwave?
From this dataset, over the range microwaves weigh between 54lbs to 71lbs – with the average clocking in at an even 60lbs.
How do you remove an integrated microwave?
0:234:42How To Remove Built In Microwave - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you're gonna do is we're gonna start off by getting rid of the trim. It's going to be heldMoreSo what you're gonna do is we're gonna start off by getting rid of the trim. It's going to be held in by four screws here there we go we got scribbs top and bottom on each.
How do you remove built in microwave with trim kit?
Insert a screwdriver behind the trim kit at the bottom. Pry it out slightly. Insert the screwdriver at the top and pry it out slightly. When the kit becomes loose, pull it off the cabinet with both hands.
How do you replace a built in microwave?
1:107:25Laura Report: Replacing a Microwave - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll want to measure the height and width left-to-right. Of your trim kit as well as the cabinet.MoreYou'll want to measure the height and width left-to-right. Of your trim kit as well as the cabinet. It's sitting in the reason for this is to make sure your new microwave.
How do you install a microwave above the stove?
12:0713:47How To Install an Over The Range Microwave and remove the old oneYouTubeStart of suggested clipEnd of suggested clipAnd make sure it sits over the bracket securely. You have to make sure at the bottom lip of the backMoreAnd make sure it sits over the bracket securely. You have to make sure at the bottom lip of the back of the microwave sits correctly over the bracket. And that it hooks on to me.
Do all Whirlpool microwaves use the same mounting bracket?
No, they are not all the same. Sorry, there was a problem. Please try again later.
How do you install a whirlpool low profile over the range microwave?
0:265:51Microwave Low Profile Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure that you have an electrical outlet a grounded electrical outlet above where your microwaveMoreMake sure that you have an electrical outlet a grounded electrical outlet above where your microwave is going to be installed.
How do you remove a GE over the range microwave?
0:025:58How To Remove An Over-The-Range Microwave - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat the back of the microwave is hooked on to. So even when you get the screws out that are up inMoreThat the back of the microwave is hooked on to. So even when you get the screws out that are up in this cabinet. It's not just going to drop. But the front will want to drop.
How do you remove a built in microwave?
0:393:37How To Remove Built-In Microwave - Easy! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo there's four screws that hold in this trim. One. Two three four simple as that phillipsMoreSo there's four screws that hold in this trim. One. Two three four simple as that phillips screwdriver. And if you have it connected to a drill that goes so much faster all right let's zip. These.
Can I replace over the range microwave with vent hood?
Yes! Many people replace their over the range microwave with a ducted or ductless range hood. Range hoods are the much more flexible and versatile option when it comes to ventilating your cook space, compared to microwave hoods.
How do you remove built in microwave with trim kit?
Insert a screwdriver behind the trim kit at the bottom. Pry it out slightly. Insert the screwdriver at the top and pry it out slightly. When the kit becomes loose, pull it off the cabinet with both hands.
Tools
The tools required to remove a microwave will vary among brands. The most common types needed are a screw gun, set of nut drivers, screwdrivers and screw tips. A voltage meter and pair of electrician's pliers are needed to separate the electrical connections for hardwired units.
Preparation
Before beginning this project, you should first remove the contents of the overhead cabinet. When possible, remove the range from the work area to protect it and provide better access to the microwave. Protect countertops and adjoining cabinets or flooring with drop cloths.
Disconnect Electricity
Disconnecting most microwaves require unplugging it from an outlet located in the overhead cabinet. Sometimes the appliance is hardwired to an electrical box in the cabinet. Before disconnecting a hardwired microwave, turn off the power supplying the microwave at the main breaker box.
Remove the Microwave
The first step required to remove an over-the-range microwave is to loosen and remove the two mounting screws in the overhead cabinet. The screws are about 3 inches long and are either a Phillips-head or hex-head screw. A screw gun equipped with the proper tip speeds up screw removal significantly.
How long to cook in microwave without microwave?
Press to continue cooking in manual mode adding time in steps of 30 seconds (in microwave functions) or 5 minutes (without microwave) or press + to extend the cooking time by setting a new duration.
What is the end time of a microwave?
END TIME (START DELAY) In functions which do not activate the microwave such as “Grill” or “Turbo grill”, once you have set a cooking time you can delay starting the function by programming its end time. In microwave functions the end time is equal to the duration.
How to avoid burning in oven?
At the end of cooking, open the door with caution, allowing hot air or steam to escape gradually before accessing the cavity – risk of burns. Do not obstruct hot air vents at the front of the oven – risk of fire. Exercise caution when the oven door is in the open or down position, to avoid hitting the door.
Where is the rating plate on a gas oven?
The rating plate is on the front edge of the oven (visible when the door is open).
Can you use a temperature probe on a microwave?
Only use utensils suitable for microwave ovens. Do not use metallic containers – risk of injury. Only use a temperature probe recommended for this oven – risk of fire. If smoke is emitted switch off or unplug the appliance and keep the door closed in order to stifle any flames.
Can you use metallic containers in a microwave?
Metallic containers for food or drink should never be used during microwave cooking. Always ensure that foods and accessories do not come into contact with the inside walls of the oven. Always ensure that the turntable is able to turn freely before starting the oven.
Is microwave energy dangerous?
WARNING: It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which give protection against exposure to microwave energy.
How to remove microwave over the range?
How do you remove it? To remove your over the range microwave, first, prepare your workspace by disconnecting and/or removing your stove. Then, unplug your microwave. Afterward, remove the top screws that secure your microwave, and slide it out of its place until the tabs pop off the bracket. If you’re looking to replace your old over ...
Why Would You Need To Remove An Over The Range Microwave?
Over the range microwaves, unfortunately, aren’t exempt from needing repairs or replacements. That said, it’s essential that you know how to remove your microwave to fix or replace it. However, if you only need to clean it, then you can allow it to remain in place as this is easy to do with a step stool. It will save you on time as well.
How many screws does a microwave bracket need?
The mounting bracket is attached to the wall with three or four screws. Unscrew all of these to lift the bracket off, as you will not be installing a new microwave on this bracket. However, if you’re simply repairing your microwave, then you can leave this bracket there.
How to get a microwave to work?
If you have a microwave that sits above your electric range or your gas stove, you will need to take extra precaution by disconnecting your stove. For an electric cooker, simply unplug the range from the wall. However, if you have a gas stove, then you will need to turn the gas off and disconnect the hose.
How to find the outlet for a microwave?
Open the cabinet above the microwave to find the outlet that it’s plugged into. If it’s not fed through the top cabinet, then check in the back of the cubby. Disconnect it from the wall and feed the cord through the hole of the cubby hole where the microwave sits.
What happens if the tabs on my microwave come loose?
Once the tabs come loose, then the microwave will slide out of the mounting bracket. Have your partner help you. If you don’t have someone to help, then make sure you use both hands during this phase so that you don’t drop and damage your appliance.
Why do people use microwaves?
Saves on space. Perhaps the most popular reason most people love over the range microwaves is their ability to save you on counter space. This is perfect for smaller kitchens, especially if you’re in a studio apartment or cottage style dwelling. You’ll be able to fit all your appliances on your kitchen counter and save on space if your microwave is ...