How To Remove Grill?
- 1. Open hood.
- 2. Remove screws along top edge of grill.
- 3. Pull straight out on grill. You'll probably have to give it a pretty good tug the first time.
- Remove The Plastic Valance Panel. ...
- Remove Eight 10mm Bolts. ...
- Tilt The Grille Forward A Couple Of Inches. ...
- Release The Lower Metal Mounting Clips. ...
- Unplug The Forward Camera Harness And Washer Fluid Tube.
- Remove The Grille.
How do you remove the front grill on a Chevy Silverado?
Insert a screwdriver in each V notch and push down on the top of the clip to release it. Some trucks have an optional forward camera and headlight washers. If you have these, slide the grille forward a few inches and release the connectors. Slide the grille forward and lift it off.
How do I adjust the grill on my Grill?
Pull the top left and right corners of the grill forward, so you can get your arm between the grille and the grille support. Look down between the grille and the grille support.
Do you have to remove the bottom trim off the grill?
I need to access the factory horn connection and my gorilla hands are too big for the tight squeeze just removing the plastic cover. TIA for any feedback! Yea you have to remove a bottom trim off the grill as there are two bolts behind it..I just took mine off yesterday but didn’t snap any pics not too bad tho
How to remove push pins from grill?
How to get your arm between the grill and the grille?
What are the bolts on a grill?
How to remove push pins from grill?
The panel goes from the top of the grill to the radiator support. It is held in place with several two-piece plastic pushpins. (Plastic can be vulnerable in very cold temperatures, so be careful.) To remove the push pins, pry up the center portion about 1/2 inch. That releases the bottom portion of the pushpin, which makes them easy to lift out.
How to get your arm between the grill and the grille?
Pull the top left and right corners of the grill forward, so you can get your arm between the grille and the grille support.
What are the bolts on a grill?
The bolts hold the top edge of the grille to the grille support. Removing them is easy. The nuts are mounted to spring clips that clip onto the grille support. The spring clips are not very snug and are easy to lose.
How to remove push pins from grill?
The panel goes from the top of the grill to the radiator support. It is held in place with several two-piece plastic pushpins. (Plastic can be vulnerable in very cold temperatures, so be careful.) To remove the push pins, pry up the center portion about 1/2 inch. That releases the bottom portion of the pushpin, which makes them easy to lift out.
How to get your arm between the grill and the grille?
Pull the top left and right corners of the grill forward, so you can get your arm between the grille and the grille support.
What are the bolts on a grill?
The bolts hold the top edge of the grille to the grille support. Removing them is easy. The nuts are mounted to spring clips that clip onto the grille support. The spring clips are not very snug and are easy to lose.
