The Steps:
- U se a flat blade screwdriver to remove the hot/cold button from the handle of the tap requiring a new ceramic cartridge.
- Use an Allen key of the correct size to undo the bolt holding on the top section of the tap.
- As you lift off the top section of the tap, you will discover a brass locking nut. ...
How do I replace my monoblock Tap’s ceramic disc cartridge?
Below the brass locking nut, you will discover your monoblock tap’s ceramic disc cartridge. Remove the retaining washer and tap it on the kitchen or bathroom surface. With any luck, the ceramic disc cartridge will fall out of the valve body. You can replace the actual discs themselves though this is a far more precise, specialist task.
How do you remove a tap cartridge?
Remove the tap head cover (also known as tap inserts) before removing the tap head using the screwdriver and then the cartridge retaining nut underneath. Using your spanner, take out the tap cartridge. Repeat steps 1 and 2 for any further tap cartridges. Soak your tap cartridges in a mix of half vinegar and half water for 10 minutes.
How do you clean a tap with a spanner?
Using your spanner, take out the tap cartridge. Soak the cartridge in a mix of half vinegar and half water for 10 minutes. Take your old toothbrush and gently clean the inside of the tap. Give the cartridge a scrub, rinse with fresh water and pat dry with a clean cloth. Put the cartridge back into the tap and replace the cartridge retaining nut.
Can you replace a ceramic tap cartridge?
While replacing a ceramic tap cartridge can be a straight-forward DIY task, there are many types of tap available to home renovators and some of these taps may feature unusual designs.
How to undo a bolt holding on a tap?
How to clean limescale off of rubber washer?
What is a ceramic disc cartridge?
How many designer bathroom taps are there?
How to replace brass nut?
Can you replace a tap cartridge?
Does a tap have a rubber washer?
See 2 more
How to undo a bolt holding on a tap?
Use an Allen key of the correct size to undo the bolt holding on the top section of the tap.
How to clean limescale off of rubber washer?
You can wash the rubber washer and O rings in warm soapy water to remove limescale. As you will see, the handle of the tap turns to move one disc over the other, opening a hole for the water to pass through. The retaining washer here acts just like a normal tap washer, providing a seal between the tap and ceramic disc.
What is a ceramic disc cartridge?
Within your monoblock bathroom tap, you will find a pair of hardened ceramic discs atop one another. The upper disc moves while the lower disc is fixed in its position. It is the movement of the upper disc that permits water to flow through or blocks it from flowing through. When closed, the seal is watertight.
How many designer bathroom taps are there?
Here you’ll find almost 200 fantastic designer bathroom taps that will enhance your existing bathroom décor or provide the perfect starting point for a new bathroom renovation. Of course, each comes with a fantastically durable ceramic tap cartridge that should last a lifetime.
How to replace brass nut?
Apply grease to the thread of the brass locking nut and replace. Do the same with the tap’s top section using your Allen key. Reapply your tap’s hot or cold symbol.
Can you replace a tap cartridge?
Now you know what the part is, you can begin the delicate yet straight-forward process of replacing it! Of course, you could simply replace the tap itself. But where would the fun in that be? A new cartridge is a fraction of the cost of a full new tap, and will leave you instilled with a hard-to-beat sensation of having performed some DIY magic.
Does a tap have a rubber washer?
If you have a slightly older tap, it's possible that instead of a ceramic disc cartridge, your tap will have a rubber tap washer; if you'd like to find out how to change a tap washer, please see our other article specifically tailored to changing a tap washer here.
chocdrop
can anyone tell me how you remove the tap covers on the following type of tap? The taps are dripping, so I want to look at the ceramic cartridges and perhaps clean them up as they are only a year old (so couldn't have worn away just yet surely, more like debris inside the tap causing problems?).
chocdrop
thanks. do you think its likely to be debris casunig the drip considering they are only a year old?
Softus
thanks. do you think its likely to be debris casunig the drip considering they are only a year old?
DIYnot Local
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Chocdrop4767 New Member
can anyone tell me how you remove the tap covers on the following type of tap? The taps are dripping, so I want to look at the ceramic cartridges and perhaps clean them up as they are only a year old (so couldn't have worn away just yet surely, more like debris inside the tap causing problems?).
Walterfilter New Member
would've thought the same way by gently levering off the red/blue colour cap and exposing the screw..??
ponty 01 New Member
did one like those the other week,there was no screw,so you got to get hold of the tap top and pull,quite hard but they do come off, thats if there is not a screw under the coloured top
How to remove tap head cover?
Remove the tap head cover (also known as tap inserts) before removing the tap head using the screwdriver and then the cartridge retaining nut underneath. Using your spanner, take out the tap cartridge. Repeat steps 1 and 2 for any further tap cartridges.
How to clean a toothbrush cartridge?
Soak your tap cartridges in a mix of half vinegar and half water for 10 minutes. Take your old toothbrush and gently clean the inside of the tap. Give the tap cartridge a scrub, rinse with fresh water and pat dry with a clean cloth. Put the cartridge back into the tap and replace the cartridge retaining nut.
Why do you need to clean your water cartridges?
Cleaning your tap cartridges can help prevent limescale and particle build-up which , over time , can affect the flow of water.
What is ceramic mixer tap?
Ceramic mixer tap cartridges are more hardwearing and durable than the rubber washers found in older taps, offering greater control over flow and temperature. If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations.
How to remove shower cartridges?
Slip off the stem cover and anything else in front of the cartridge. Removing the adapter will reveal a small metal cylinder in the center of the wall opening. However, many shower cartridge systems have a few extra layers of protection around it. Yours may have a white plastic cap, followed by a metal ring. Pull both of them off the cartridge by hand and set them aside.
How to pop a cartridge out of a slot?
It is usually made of steel and situated in a groove on the cartridge. Reach in with a pair of needle nose pliers, then lift it to pop it out of the slot .
What is a faucet cartridge made of?
Your faucet may have a silvery cartridge made of chrome or zinc, or a white one made of plastic.
What to do if your faucet has multiple handles?
If your faucet is connected to multiple handles, remember to replace the cartridge in the other handle as well if necessary.
How to get a new faucet cartridge?
Order a new cartridge by noting the manufacturer’s name and the faucet’s model number. The name is usually printed somewhere on the faucet handle. The model number can sometimes be found on the faucet as well, such as on a tag tied to the cold water line.
Why is the cartridge recognizable?
The cartridge is recognizable because of its column-like stem jutting out from the wall. The cartridge’s base is round and fits inside the wall opening.
What to do if you lose a part?
If you happen to lose a part, order a replacement online or from a hardware store.
How to undo a bolt holding on a tap?
Use an Allen key of the correct size to undo the bolt holding on the top section of the tap.
How to clean limescale off of rubber washer?
You can wash the rubber washer and O rings in warm soapy water to remove limescale. As you will see, the handle of the tap turns to move one disc over the other, opening a hole for the water to pass through. The retaining washer here acts just like a normal tap washer, providing a seal between the tap and ceramic disc.
What is a ceramic disc cartridge?
Within your monoblock bathroom tap, you will find a pair of hardened ceramic discs atop one another. The upper disc moves while the lower disc is fixed in its position. It is the movement of the upper disc that permits water to flow through or blocks it from flowing through. When closed, the seal is watertight.
How many designer bathroom taps are there?
Here you’ll find almost 200 fantastic designer bathroom taps that will enhance your existing bathroom décor or provide the perfect starting point for a new bathroom renovation. Of course, each comes with a fantastically durable ceramic tap cartridge that should last a lifetime.
How to replace brass nut?
Apply grease to the thread of the brass locking nut and replace. Do the same with the tap’s top section using your Allen key. Reapply your tap’s hot or cold symbol.
Can you replace a tap cartridge?
Now you know what the part is, you can begin the delicate yet straight-forward process of replacing it! Of course, you could simply replace the tap itself. But where would the fun in that be? A new cartridge is a fraction of the cost of a full new tap, and will leave you instilled with a hard-to-beat sensation of having performed some DIY magic.
Does a tap have a rubber washer?
If you have a slightly older tap, it's possible that instead of a ceramic disc cartridge, your tap will have a rubber tap washer; if you'd like to find out how to change a tap washer, please see our other article specifically tailored to changing a tap washer here.