5 Steps to Take Apart Your Kenmore Washer
- Step-1: Removing The Console From Washer First, turn off the power and water supplies. ...
- Step-2: Take off Clippings Now, elevate the console. ...
- Step-3: Disconnect Connector Plug This step is a safety measure. ...
- Step-4: Taking Off Cabinet From Washer Now, it’s time to take off the washer casing or cabinet. ...
- Step-5: Removing Agitator Tug the agitator firmly to pull it out. ...
Full Answer
How to remove the control panel on a washer?
Why won't my Kenmore washer spin?
How to clean out a washer when moving?
Where to look for screws on washer?
Can you remove a spring clip?
About this website
How do you remove the control board on a Kenmore washer?
2:248:05Replacing Your Kenmore Washer's Electronic Control Board - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe control board. Yeah now this is just going to be a little bit easier to unplug. Everything. SoMoreThe control board. Yeah now this is just going to be a little bit easier to unplug. Everything. So we can just take all the clubhead out.
How do you remove the control panel from a Kenmore top load washer?
2:4113:44Kenmore Top-Load Washer Disassembly (11022932100 ...YouTubeStart of suggested clipEnd of suggested clipUse a Philips head screwdriver to unthread the two screws securing the control panel lift up theMoreUse a Philips head screwdriver to unthread the two screws securing the control panel lift up the control panel to reach the timer and selector switches to replace a switch first remove the appropriate
How do you remove the control board from a washing machine?
0:112:22GE Top-Load Washer Control Board Replacement #WH12X10524YouTubeStart of suggested clipEnd of suggested clipSlide the panel to the side to detach it from the main. Top detach the wires from the old control.MoreSlide the panel to the side to detach it from the main. Top detach the wires from the old control. Board remove the mounting screws and brackets securing the old control board and switches.
How do I open control panel on washing machine?
0:481:37How to open a Washer Dryer control panel - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo either take them out or make sure they're all the way out away from this metal. Once you do thatMoreSo either take them out or make sure they're all the way out away from this metal. Once you do that you just grab the control panel slide it forward towards you and a little bit up.
How do I change the control board on my Kenmore Elite?
2:235:08How To: LG/Kenmore Main Electronic Control Board EBR34917104YouTubeStart of suggested clipEnd of suggested clipAll you have to do is carefully lift up on it and pull out on the board.MoreAll you have to do is carefully lift up on it and pull out on the board.
How do you reset a Kenmore washing machine?
0:584:27Kenmore Elite Front Load Washer Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipThing you have to unplug it in our case we had to pull the unit out from behind the cabinet. Or fromMoreThing you have to unplug it in our case we had to pull the unit out from behind the cabinet. Or from under the cabinet. And then we hit the power button right there for 10 seconds.
Can a washer control board be repaired?
We will quickly repair your control circuit board. We do more than just repair the part, we go to the root of the problem and use the high quality parts to ensure the issue does not return.
How do you replace the control board on a front load washer?
0:402:55Whirlpool Front-Load Washer Replace Control Board #WPW10735683YouTubeStart of suggested clipEnd of suggested clipSlide the top panel back and lift up to detach release the Control Board locking tab and pull theMoreSlide the top panel back and lift up to detach release the Control Board locking tab and pull the assembly back to detach it from the side panel. Release the wire covers. And note the orientation of
What is a washing machine control panel?
What your washing machine control panel does: Your washing machine has three main settings: agitation, length, and temperature. These are the main features your machine has which allow you to tailor your wash to the fabrics you're cleaning. Setting Agitation. For delicates, you need less agitation.
Where is the washing machines control panel located?
They're located near the back of the washer in top load models and the front in front load models. Behind the console panel, you'll find the electronic components that control essentially all the action and timing of the washer.
How do I open the control panel on my Whirlpool washer?
0:371:49How to Remove the Control Panel on a Whirlpool Washing MachineYouTubeStart of suggested clipEnd of suggested clipAll you have to do is move the control panel kind of forward and up and it pops right out you canMoreAll you have to do is move the control panel kind of forward and up and it pops right out you can see where they they rest right in there kind of see where hook in and then pull the control panel.
How do you unlock the control panel on a Whirlpool washing machine?
0:151:02Front Load Washer Control Lock Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe control lock icon on the display will light up when it is on press and hold again for 3 secondsMoreThe control lock icon on the display will light up when it is on press and hold again for 3 seconds to unlock the washer.
How do you remove the control panel from a Kenmore 70 Series washer?
0:253:22Disassemble Whirlpool/Kenmore Direct Drive Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey have spring clips. They have to slip a putty knife underneath to release them. Once you haveMoreThey have spring clips. They have to slip a putty knife underneath to release them. Once you have your screws out slide the control panel forward about 1/2 an inch.
How do you remove the front panel on a Kenmore Elite washer?
1:394:12LG/Kenmore Front-Load Washer Disassembly (Model 79640311900)YouTubeStart of suggested clipEnd of suggested clipNow moving from left to right detach the control panel mounting tabs and move the panel out of theMoreNow moving from left to right detach the control panel mounting tabs and move the panel out of the way. You can now remove the upper front panel mounting screws. And lift the front panel up.
How do I reset my Kenmore 700 Series washer?
1:173:47Washer Not Spinning - How to Reset Motor (Easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe machine gives you 30 seconds to lift the lid and close. It six times and once you start liftingMoreThe machine gives you 30 seconds to lift the lid and close. It six times and once you start lifting the lid. You have 12 seconds to do the six repetitions.
How do you install a washer on an electronic control board?
4:137:17How To: Whirlpool/KitchenAid/Maytag Electronic Control Board WP8571903YouTubeStart of suggested clipEnd of suggested clipAll you have to do is line up the flat. There's a flat on the shaft. And a flat on the knob. All youMoreAll you have to do is line up the flat. There's a flat on the shaft. And a flat on the knob. All you have to do is rotate. It over and push it. On.
How to remove the control panel on a washer?
Remove the end caps of the control panel. This will make it so you can remove the two screws that hold it to the washer's body.
Why won't my Kenmore washer spin?
If your Kenmore washer won't spin after filling up the basket with water and agitating your clothing, then your lid switch may be bad. Maybe, it's something else. Either way, you need to get that control panel up off of the washer. Here is how.
How to clean out a washer when moving?
It can get pretty bad back there between repairs and moving. Have a bucket for the hose to drain in to. Look at the back of the washer for the screws that you will need to remove. Remove the screws that connect the assembly to the was her.
Where to look for screws on washer?
Look at the back of the washer for the screws that you will need to remove.
Can you remove a spring clip?
Remove the spring clip if you need to get in further for your repair.
How to remove front panel from washer?
Pull the bottom of the front panel out slightly and pull down to disengage the top clips. Remove the front panel away from the washer.
Where is the bridge panel on a Kenmore washer?
You will need to remove the bridge panel to access some areas for removal. The bridge panel is the panel that angles from the back of the washer to the bottom of the dryer.
How to remove wires from front panel?
Remove the screws with a Phillips-head screwdriver. Lean the front panel out toward you until you can reach the wires inside. Disconnect the door switch wires, spark gap and the three wires that connect to the control board. You can remove all wires by pulling them from the terminal ends with your fingers. Lower the front panel out of the way.
What is a bridge panel on a washer?
The bridge panel is the panel that angles from the back of the washer to the bottom of the dryer. When you remove the bridge panel, you can access the washer top mounting bolts and the control components in the dryer. Advertisement.
Where are the screws on a dryer?
The screws will be under the front bottom of the dryer portion of the laundry center. Remove the two screws and tilt the bridge down. Pull the bridge away from the laundry unit. Advertisement.
Can a washer belt break?
Over time, the belt on the rear of the washer can stretch or break, and you must remove the back panel to access the pulley, motor and drive-belt.
Does Kenmore Elite have a belt?
Your Kenmore Elite front-load washing machine uses a belt to operate the inner tub of the washer much like a belt-driven top-load washer. The large rear pulley and motor agitate the inner washtub as well as spin it during the spin cycle. Over time, the belt on the rear of the washer can stretch or break, and you must remove the back panel to access the pulley, motor and drive-belt.
How to remove the control panel on a washer?
Remove the end caps of the control panel. This will make it so you can remove the two screws that hold it to the washer's body.
Why won't my Kenmore washer spin?
If your Kenmore washer won't spin after filling up the basket with water and agitating your clothing, then your lid switch may be bad. Maybe, it's something else. Either way, you need to get that control panel up off of the washer. Here is how.
How to clean out a washer when moving?
It can get pretty bad back there between repairs and moving. Have a bucket for the hose to drain in to. Look at the back of the washer for the screws that you will need to remove. Remove the screws that connect the assembly to the was her.
Where to look for screws on washer?
Look at the back of the washer for the screws that you will need to remove.
Can you remove a spring clip?
Remove the spring clip if you need to get in further for your repair.
5 Steps to Take Apart Your Kenmore Washer
- Home appliances should be cleaned a few times a year. The last thing you need is to panic over a machine not working because it’s dirty. If you can clean your Kenmore dishwasher, you can clean your Kenmore washing machine too. Here’s how you can do so in 5 easy steps:
Why Should You Clean Your Washing Machine?
- As we mentioned before, washing machines getting dirty can sound counterintuitive. As they are always filled with water and soap. But because they always work with water and soap, there remain lots of residues. Such as soap residues, chemicals, and minerals from detergent. They get trapped within the washing machine. Later on, these create a thin film that entraps bacteria. The…
Precautions
- Safety measures should be taken while handling any electrical appliances. Here are some precautions you should take when handling a washing machine: 1. Before maintenance, unplug it from the electrical outlet. 2. Make sure pockets of clothes are empty. Hard and sharp objects can damage the appliance. 3. Turn off the water after use. 4. Before openi...
FAQs
- Question: Why is my washer not draining? Answer: Most likely, there might be a clogged pump. Or a hose. Check if there’s any small clothing item such as socks, that’s clogging them. If you can’t find any, it might be that the lid switch is defective. Question: How long should a washing machine last? Answer: Your washing machines should last you about 11 years on average. But it is sugge…
Conclusion
- That’s all I had to share. I hope I could teach you how to take apart a Kenmore washer. Home appliances make our life easier and hence should be taken care of often. Also, I have a tip for you. After washing clothes in the machine, keep the door open for 15-30 minutes. This will prevent mold and bacteria growth. Good Luck!