Accessing the Drip Pan
- 1 Check the refrigerator’s manual to find where the drip pan is located. ...
- 2 Disconnect the water and power supply if you need to access the back panel. ...
- 3 Unscrew the back panel if the drip pan is in the rear. ...
- 4 Pop off the kick panel at the bottom of the fridge if the drip pan is in the front. ...
How do you open the drain pan on a whirlpool refrigerator?
Pop off the bottom panel of the refrigerator to gain access to the drain pan. It may just pop off or have tiny screws at each end of its vented front. Once the panel is off the fridge, you should be able to see the drain pan that rests directly behind the piece.
How do you get a pan out of the bottom of refrigerator?
If you need to do more than fish a flat pan out from underneath a refrigerator, the appliance should be unplugged before you attack it with long metal screwdrivers or other tools to remove any decorative or vented pieces from the machine. Pop off the bottom panel of the refrigerator to gain access to the drain pan.
How do you clean the drip tray on a whirlpool refrigerator?
Have some old towels handy to wipe up any spills or splashes from the tray that can happen as you remove it. Use a mild abrasive, such as one part each of vinegar and water and a drop of liquid soap to wash out the drip pan. Dry it thoroughly before returning it to its place beneath the fridge.
Where is the condenser fan on a whirlpool refrigerator?
The condenser fan is located near the drain pan and keeps air circulating under the refrigerator, allowing the water that accumulates in the pan to evaporate before the pan overflows. If the pan is filled with water, and the fan is not running, it has likely burned out.
How do you remove the drip pan from a Whirlpool refrigerator?
0:000:33Whirlpool Refrigerator Repair - How to Replace the Drip Tray ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a really easy job let me show you how we do it now to do this repair we simply need to pull theMoreIt's a really easy job let me show you how we do it now to do this repair we simply need to pull the old drip tray out of the dispenser housing. So just grasp it pull it forward and discard.
How do you access a whirlpool drain pan?
0:006:44Replacing the Evaporator Drain Pan (Whirlpool Part # W10614158)YouTubeStart of suggested clipEnd of suggested clipIt is easier if you take a putty knife. And just go down at the top of it just enough to start itMoreIt is easier if you take a putty knife. And just go down at the top of it just enough to start it once you get your hands behind it. We can just pull it completely off.
Where is the drain pan on my Whirlpool refrigerator?
0:307:43How To: Whirlpool/KitchenAid/Maytag Drip Pan WPW10655367 - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck the drip pan for cracks and replace it if needed we need to remove the access panel I'm gonnaMoreCheck the drip pan for cracks and replace it if needed we need to remove the access panel I'm gonna use the core inch nut driver I'm gonna take out the screws that holds the panel.
How do you get a drain pan out of a refrigerator?
A refrigerator's drain pan is located on the bottom of the unit, near the floor. It typically can be accessed by removing the grill on the front of the refrigerator and sliding the pan forward. Clean the pan thoroughly and check for cracks or splits.
Where is the drip pan on a side by side Whirlpool refrigerator?
Your refrigerator drip pan will most likely be concealed behind the kick panel. If you have a front-access drip pan, you can pull it out. Otherwise, move the refrigerator out from the wall to see if you can access it from the back.
How do I access my defrost drain pan?
0:408:34How To: Whirlpool/KitchenAid/Maytag Defrost Drain Pan WP842041YouTubeStart of suggested clipEnd of suggested clipThe defrost drain pan is located in the bottom of the refrigerator. And it catches the water fromMoreThe defrost drain pan is located in the bottom of the refrigerator. And it catches the water from the defrost cycle manners you've changing it out so if it's lost or damaged.
Do Whirlpool fridges have drip pan?
The drain pan will be behind the panel at the back of the unit. You will want to clean the drain pan out the best you can because it isn't designed to be removed from the unit.
How do you clean the defrost drain on a Whirlpool refrigerator?
1:105:09How To: Whirlpool/KitchenAid/Maytag Refrigerator Drain Tube W10619951YouTubeStart of suggested clipEnd of suggested clipLeave the door out remove the bottom drawer. And now we can use the heat gun to melt the ice andMoreLeave the door out remove the bottom drawer. And now we can use the heat gun to melt the ice and defrost the drain be careful not to melt the plastic lining. If there's a water in the drip pan.
Where is the refrigerator drip pan located?
While refrigerators vary in design, the drip pan is almost universally located in the bottom of the unit. This is so that gravity will allow the liquid to flow easily from the top of the unit to the bottom.
Why is the pan under my refrigerator full of water?
The tray under your refrigerator helps catch condensation. The refrigerator drip pan or water tray is installed underneath a refrigerator to catch condensation from the fridge's interior as the appliance goes through its normal operating cycles.
Should there be water in the pan under my refrigerator?
A drip pan in a refrigerator is meant to catch any water that needs to be drained away from the inside of the refrigerator. Ideally, small amounts of water will enter the drip pan and safely evaporate away instead of becoming standing water.
How often should you clean drip tray in fridge?
The drip pan on a fridge catches the condensation flowing from the defrost drain — but if it isn't regularly cleaned, it can store mould, germs and nasty bacteria and cause a bad smell. While commonly overlooked, the tray should be cleaned every three months.
How do you access the drip tray on a refrigerator?
0:111:05How to clean a fridge drip tray | by Hotpoint - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'll turn the fridge/freezer off and spun it around and at the bottom here you can see theMoreSo I'll turn the fridge/freezer off and spun it around and at the bottom here you can see the compressor. Now sitting on top of that is the drip tray.
How do you clean the defrost drain on a Whirlpool refrigerator?
1:105:09How To: Whirlpool/KitchenAid/Maytag Refrigerator Drain Tube W10619951YouTubeStart of suggested clipEnd of suggested clipLeave the door out remove the bottom drawer. And now we can use the heat gun to melt the ice andMoreLeave the door out remove the bottom drawer. And now we can use the heat gun to melt the ice and defrost the drain be careful not to melt the plastic lining. If there's a water in the drip pan.
Why is my refrigerator drain pan full of water?
Check the drain pan for cracks and clean out any foreign objects that may be inside the drain pan. Excessive frost caused by a leaking door seal can also cause the defrost drain pan to overflow. If you see the refrigerator drain pan full of water and overflowing, check the door gaskets and replace them if damaged.
How do you remove a drip tray?
If the drip pan is in the front of the fridge, start by removing the kick panel. It's positioned at the bottom of the refrigerator and you can easily pull it out by sliding a putty knife between the appliance and the kick panel itself. Once you remove it, locate the drip panel and try to pull it out.
How to clean drip pans in refrigerator?
Have some old towels handy to wipe up any spills or splashes from the tray that can happen as you remove it. Use a mild abrasive, such as one part each of vinegar and water and a drop of liquid soap to wash out the drip pan. Dry it thoroughly before returning it to its place beneath the fridge.
What is a flat tray in a refrigerator?
The wide and flat tray collects all the condensation created by the working of the cooling appliance on a daily basis. It is also in place in case of any errant leakage from the condensation coils or water tubes that run along the backside of the machine. Water that drips from the condensation coils (or drippings from defrost cycle) will also find their way neatly into a refrigerator drain pan.
Can drain pans be removed from a refrigerator?
Some drain pans simply slide right out from underneath a refrigerator. Others require panels to be removed. If you need to do more than fish a flat pan out from underneath a refrigerator, the appliance should be unplugged before you attack it with long metal screwdrivers or other tools to remove any decorative or vented pieces from the machine.
1: Check Your Fridge For Moisture Signals
Look at the bottom of your refrigerator door. There should be a plastic or rubber strip that runs around the entire perimeter of the door. This seal helps to keep the moisture from seeping into the refrigerator. If this seal is damaged or broken, moisture can seep into the refrigerator and cause all sorts of problems.
2: Unplug Your Refrigerator For At Least 12 Hours!
The first thing you should do is unplug your refrigerator. You should do this both before you start fixing anything, and also after you have finished fixing whatever it is that needs to be fixed.
3: Clean Out Your Refrigerator Drain Tube!
To clean out your refrigerator drain tube, you are going to need a small tool called a “crimp tool”. You can get one at any home center or hardware store. To use this tool, simply put the pointed end into the hole where the drain tube comes out of the bottom of your fridge, and then turn the tool in a circular motion.
4: Clean Out The Trapped Gasses In Your Fridge!
To clean out the trapped gases in your fridge, you are going to need a small tool called a “carburetor cleaning tool”. You can get one at any home center or hardware store. To use this tool, simply insert the pointed end into the hole where the trapped gases come out of the bottom of your fridge, and then turn the tool in a circular motion.
5: Clean The Exterior Of Your Refrigerator!
To clean the exterior of your refrigerator, you are going to need a soft bristled brush and some dishwashing liquid. First, take off the access panel that is located on the back of your refrigerator. Then, using your multimeter, check the resistance of each of the black electrical wires that run underneath the access panel.