How to Remove a Soft Close Toilet Seat with a Top-Mount Mechanism
- Lift the toilet seat at 90 degrees to the toilet and simply lift it off. ...
- The mounting base is covered with a plastic cap matching the color of the seat or one made of chrome. ...
- After removing the cap you will now see the top of the mounting bolt. ...
- Remove the mounting base and the washers from the bowl.
How often should I Clean my Toilet Seat?
Inside The Bowl – How Often Should You Clean Your Toilet
- Daily Maintenance: This is mostly done for messes that won’t flush. ...
- Weekly Maintenance: Weekly maintenance is a smart move to keep those rust and yellow colors from appearing in the bowl. ...
- Monthly Maintenance: Monthly maintenance requires one extra step – cleaning solution. Chances are, you’ll opt for bleach or another chemical.
How to clean a toilet seat thoroughly?
Here’s how we do it:
- First, you’ll need to remove the toilet seat from the toilet and put it on a floor that is safe to make a mess on.
- Get a large bottle of white vinegar. ...
- Then, grab a paper towel and soak it in vinegar till it’s thoroughly soaked in it. ...
How to remove toilet seat with hidden fixings?
To remove a toilet seat with hidden fixings, take the following steps:
- Put on protective gloves for hygiene and safety purposes.
- Tape the seat to the toilet cover with duct tape.
- Check out the caps covering the hinges and bolt to determine how they are oriented.
- Remove the plastic caps by easing your flathead screwdriver below the cap while popping it up.
- Remove the seat of the toilet from the bowl. ...
How to remove the screws on a toilet seat?
Method
- Remove bolt caps covering the seat fasteners. ...
- Look underneath the seat, you should see a mounting nut that holds the screw and seat in place. ...
- Unfasten the bolts and use the screwdriver to unwound the screw. ...
- Take out the nuts and screws. ...
- Now take out the toilet seat and wipe down with a piece of cloth or paper towel.
How do you take the lid off a toilet seat?
Many new toilet seats are attached to the toilet bowl with two plastic bolts and nuts. ... Remove the Bolts.To remove the seat, hold the nut while unscrewing the bolt. ... Use a Basin Wrench for Tight Spaces.If you have a tight space to work in, you may need a basin wrench (tool on the far right). ... Remove the Toilet Seat.More items...
How do I remove a hidden toilet seat cover?
1:523:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipLook. You can see there there's a little screw on the top. And we need to tighten up that screw. SoMoreLook. You can see there there's a little screw on the top. And we need to tighten up that screw. So we can take a phillips head screwdriver. Tighten that one up nicely.
Why can't I unscrew my toilet seat?
If the bolt is brass or badly corroded steel, you might break it off, which is just fine. If the nut won't budge, douse it with a penetrating spray lubricant such as WD-40. Hold a rag behind the nut to catch the overspray. Give the lubricant 15 minutes to penetrate, then try again.
What is a lift off toilet seat?
Lift-off seats: maximum hygiene in sanitary ceramics This system for sanitaryware consists of seats which are very simply undone regarding their removal, through an extraction by pulling gently with one hand from the seat placed in the open position.
How do you replace hidden Toto toilet seat bolts?
0:572:16Toilet Seat Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipHoles. Next place a toilet seat over the mounting holes and insert the metal washers and mountingMoreHoles. Next place a toilet seat over the mounting holes and insert the metal washers and mounting bolts into the holes. Screw from the underside of the toilet the mounting bolts lock nuts.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
How do I remove a toilet screw?
0:161:46How to Get a Toilet With a Stuck Bolt Off the Floor : Toilet RepairsYouTubeStart of suggested clipEnd of suggested clipTake your wrench on the bottom side and twist them to loosen after it gets loosened you should beMoreTake your wrench on the bottom side and twist them to loosen after it gets loosened you should be able to go down there and loosen up with your hands if not just continue to work it with the tools.
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
How do you remove the hidden repairs on a Kohler toilet?
0:442:11KOHLER Toilet Seat Anchor Kit 1461673 Replacement InstructionsYouTubeStart of suggested clipEnd of suggested clipUsing a phillips screwdriver unthread the bolts holding the toilet seat in place. If the anchorMoreUsing a phillips screwdriver unthread the bolts holding the toilet seat in place. If the anchor spins and the bolt cannot be unthreaded. Press the teeth of the stabilizer.
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
What are the different types of toilet seat fittings?
Types Of Toilet Seat Fittings There are two types of toilet seat fixings: Bottom Fixings and Top Fixings. Top fixing toilets seats work by feeding two bolts into the pan which are then tightened from the top. Bottom toilet seat fixings are fitted from the top and then tightened from underneath, often with wing nuts.
What are the different types of toilet seats?
There are 2 main types of toilet seat: standard close and soft close.
How to clean rust off toilet seat?
Take out the nuts and screws. Place them away as you wait to replace them. Put them in a plastic bag more especially if made with metal to avoid rust. Now take out the toilet seat and wipe down with a piece of cloth or paper towel.
What are hidden fixings on toilets?
Hidden fixings are common with modern toilets as people don’t want to see bolts on their toilets, plus it prevents them from damage. Look at the back of the toilet and check from underneath to see if you can spot screws. Again, they could be metal or plastic.
How to prevent a toilet from scratching?
Use your knife to cover the porcelain that is around the bolt head to prevent accidental scratches as you saw through. Secure the rest of the toilet with masking or duct tape as you don’t want to hack through any other part of the toilet. Cut through the bolt along with the hinges connected to the toilet seat.
How to unwound wingnut on toilet?
You could use a socket wrench to get a deeper , firmer grip on the metal hinges then use your hands to unwound the wingnut underneath the toilet. The socket should be about half an inch wide so it can fit over the bolts easily.
What to do if you didn't cut well?
For any area you didn’t cut well, use the knife to scrape it off.
Can you remove a toilet seat with bolts?
Depending on the type of toilet brand you have, the bolt s could be made from metal or plastic, some with bolts caps, some without. Nonetheless, the process of removal is similar. Take a look at a step-by-step guide on how you can remove a toilet seat.
Can you unscrew a seat with metal hinges?
Removing Seat with Metal Hinges. If the bolts securing the seats are made of metal, you could use a pair of pliers to unscrew them. But metal hinges have one disadvantage, they rust. This means that even the pliers may be unable to unscrew the bolt.
What do you use to hold toilet seats together?
Many new toilets use bolts and nuts to hold their seats together. For most newer toilet models, these bolts are housed under a small plastic cover. However, if your toilet doesn’t use bolt caps, you can totally skip this part.
Why do people remove toilet seats?
People only think about removing their toilet seats when they need to change it to a new one. However, because of sanitary reasons it should be done more often .
How to avoid cracking porcelain toilet?
Again, be careful. Always use light pressure when working on your toilet to avoid cracking or chipping of the porcelain or china material. You also don’t want to break or deform the fastener either, which usually comes in plastic.
How to keep a car seat from getting lost?
You want to keep them in a secure place so that they don’t get lost as they are small pieces and can easily get scattered. A sealable plastic bag is a good place to hold them. After collecting these items, you can go on to remove the seat.
Can you remove a toilet seat?
Well, it might help you to know that removing a toilet seat is no big deal. Whether you want to remove your toilet seat to replace it or as part of a cleaning routine, you can get the task done easily with a few home tools.
Can you remove bolt caps?
Removing the bolt caps might not be very easy, especially if the seat has been there for a long time. However, you’ll want to be careful with this step as you don’t want to cause damage. The caps themselves are usually made of plastic, and being too aggressive with them can cause them to rip or crack.
Do toilet seats have to be unique?
Some manufacturers have very specific toilets that are unique and don’t adhere to most common measurements of other toilets. The seats on these will often be unique as well. So if you have one of these toilets, it’s important to order your seat from that same manufacturer to maintain uniformity.
How to get a toilet seat off?
Lift the toilet seat at 90 degrees to the toilet and simply lift it off. For some models of toilet seats you may need to push one or two buttons in order for the seat to release. The mounting base is covered with a plastic cap matching the color of the seat or one made of chrome. Pry it out.
How to slide a Kohler toilet seat backwards?
Other brands like Kohler toilet seats you will only need to slide the seat backwards only. Take your screwdriver and engage the top of the bolt. Using your other hand, reach for the wingnut underneath the toilet bowl. Hold the wingnut with your hand as you unscrew the bolt with the screw driver.
What is a soft close toilet seat?
Most soft close toilet seats are a combination of either top-mount and quick-release mechanism or bottom-mount and quick-release mechanism. Standard soft close toilet seats have no quick-release mechanism and are fixed from the bottom. The top-mount unlike the bottom-mount soft close toilet seats gives the persons removing or installing them ...
Do you need to bend a wingnut to remove a toilet seat?
You don’t need to bend to screw in a wingnut from under neath the bowl. The quick-release soft close toilet seats to make are desirable for sanitary purposes. It is easy and quick to remove the toilet seat while cleaning. You just push a bottom or two for that matter and slide the seat out.
Do soft close toilet seats last forever?
Soft close toilet seats are a very welcome innovation given how irritating toilet seat slamming can be. It is unfortunate that just like the non-soft close toilet seats they don’t last forever. At one time you will need to replace them. Knowing how to remove a soft close toilet seat helps.
Can you use a wrench to remove a toilet seat?
If the bolt and nut are metallic and corroded, you should use a wrench to make it loose. Once the bolts are out lift off the toilet seat. This is also how you would need to remove this toilet seat if you wanted to clean it. The quick-release toilet seats were designed to solve this problem.
How to get a nylon seat off after it melted?
After it has melted its way through the nut on one side of the bolt, change the blade's orientation and make another groove on the other side of the nut, so that it can fall freely away. Repeat the operation on the second nylon nut and lift the seat off. Advertisement.
What to do if a toilet nut doesn't have wings?
If the nuts don't have wings, lock a pair of locking pliers around each one in turn. When you unscrew the screw, the pliers will hit against the toilet bowl and prevent the nut from turning, and it will loosen. Advertisement.
How to stop threads from stripping?
To avoid stripping the threads, spray the bolts with a soap solution before unscrewing the nuts. Some nuts have wings that you can grasp with your fingers; while turning these, stabilize the bolt from above with a screwdriver. If the nuts don't have wings, lock a pair of locking pliers around each one in turn.
How to remove a nylon nut from a bolt?
Wearing protective gloves, heat the blade of a metal putty knife red hot with a propane torch and push it up into the nut, at its side nearest the bolt, from underneath. After it has melted its way through the nut on one side of the bolt, change the blade's orientation and make another groove on the other side of the nut, so that it can fall freely away. Repeat the operation on the second nylon nut and lift the seat off.
What are toilet seats notorious for?
Toilet seats are notorious for corroded, hard-to-remove bolts.
How to separate a nut from a nut?
Drill a hole straight up through the inside edge of the nut. Remove the bit and drill another hole 60 to 90 degrees away, then tap the section between the holes with a chisel, and the nut should separate. If not, drill more holes between the two you just drilled. After tapping off that section of the nut, you should be able to pry ...
Is a toilet a closed toilet?
Thanks for another helpful reply. Yes, the toilet is the closed type with no access to fittings from the underside.
Do loo seats work in BQ?
These top fixing seats are becoming the norm as most loo seats in BQ use this system, and they work well. Depending on the hole size in pan, the bungs can be a really tight fit and need a few taps to fully seat them so getting them out, can be difficult. As above, cone nut traveling up on thread expands bung, etc.
How to replace a toilet seat?
Toilet seats are held in place by large plastic or metal screws, before you can replace the seat, remove the snap caps that enclose these screws. 1. Put on the rubber gloves. Wipe all surfaces of the toilet with a disinfectant cleaner ...
Why close the lid on a toilet?
Close the toilet lid so you have better access to the snap caps, which are directly behind the toilet seat.
How to clean a screwdriver?
Wipe your screwdriver with disinfectant spray and dry completely before returning to a tool box or area where you store your tools.
Do you over tighten toilet seat screws?
Do not over tighten the screws when you install a new seat or reattach the old one because you risk damaging the plastic screws or damaging the toilet if you're dealing with metal screws. Jennifer Pinto has been an editor and reporter since 1999, working with newspapers in the Midwest and on the East Coast.
Can you replace toilet seats in a new home?
When you purchase a new home, certain fixtures remain when the former occupant vacates the premises. Such fixtures include an oven, cabinets and toilets. When the home was previously occupied, you may want to install new toilet seats for sanitary reasons. Swapping out used seats with new ones can be accomplished in less than 10 minutes and only requires a screwdriver. Toilet seats are held in place by large plastic or metal screws, before you can replace the seat, remove the snap caps that enclose these screws.
