What Are the Steps for Thetford RV Toilet Removal?
- Step 1: Switch off any water source ...
- Step 2: Flush the RV toilet to release any water pressure ...
- Step 3: Take out and deplete the water supply line ...
- Step 4: Remove toilet bolt covers & toilet bolts ...
- Step 5: Take out the existing toilet off the floor ...
- Step 6: Clean the surface of the floor flange ...
How do you remove a Thetford toilet?
So, when removing your Thetford toilet, you must remove it. To do this, you will need to use a flathead screwdriver. Just put the tip of the screwdriver to the seams of the bolt cover and lift up. There are usually two of these, so you just have to do the same step to the other bolt covers.
How do you remove the back of a toilet seat?
If you need to remove a toilet seat, use your fingers or a screwdriver to pry off the plastic covers at the back of the seat. Once you’ve exposed the screw that holds the seat in place, use your fingers or a pair of pliers to hold the nut in place, and unscrew the bolt with a screwdriver.
Are Thetford toilet seats removable?
The Thetford instruction leaflet that accompanied the vehicle states that the toilet's seat and cover are removable but doesn't reveal how to remove them.
How to install a new toilet seat?
Remove the seat from the toilet. Collect the nuts, bolts, and any loose plastic or metal hardware (like the bolt covers) that also go with the seat. Put these small pieces into a sealable plastic bag and tape them to the seat so they don’t become lost. Your toilet seat is removed, now you can install a new one. [5]
How do you take the top off a Thetford toilet?
To gain access to the back bolt, lift up the seat and cover and remove the access hole, which should be located on top of the hopper. Then use a 12-inch extension with a universal and a 12-inch deep-well socket to remove the rear nut. Lift the Thetford toilet straight up off the closet flange.
How do I remove my toilet seat?
0:243:08How to Replace a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipOthers you would lift up to get to the bolts. To find the bolts look underneath the toilet andMoreOthers you would lift up to get to the bolts. To find the bolts look underneath the toilet and remove the nut that's holding it down after you've taken it off give the area a good cleaning.
How do you remove a toilet seat without screws?
1:523:10How to fix a toilet seat with hidden fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's a little chrome. Button we're just going to simply press those in lift up and the toiletMoreSo it's a little chrome. Button we're just going to simply press those in lift up and the toilet seat will come. Off. Now we've got our toilet seat off we've got our caps exposed.
How do I remove a Dometic toilet seat?
1:303:19Dometic Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it comes off very easily all you got to do is pop up the two tabs in the back where the screwsMoreAnd it comes off very easily all you got to do is pop up the two tabs in the back where the screws are and it'll pull right off there and you can take it and clean it if you want to.
How do you tighten a toilet seat with no access underside?
In these situations, you can hold the nut in place with a pair of pliers while using the screwdriver to tighten the bolts. The wing located on the nut will prevent the bolt from turning back on itself by locking it in place. Again, keep tightening the bolt until the seat feels secure.
How do you remove toilet seat bolts?
0:182:56Remove Toilet Seat - Replacing a Toilet Seat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's a lot of different style bolts. But this one a slotted screwdriver fits right into theMoreAnd there's a lot of different style bolts. But this one a slotted screwdriver fits right into the top and I'm going to take a pair of pliers. And I'm just going to grab the nut underneath.
How do you remove a quick release toilet seat?
1:148:01How to Remove & Replace a Toilet Seat (Soft Close & Quick Release)YouTubeStart of suggested clipEnd of suggested clipToo so once both the nuts have been removed on either side the lid should then just lift out like soMoreToo so once both the nuts have been removed on either side the lid should then just lift out like so and you'll be left with these two holes ready to add the new toilet seat.
How do you remove top fix toilet seat fittings?
1:0910:18How to change a Pressalit toilet seat with top fixings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to remove the hinge out of the toilet you need Philips screwdriver or a little small spannerMoreSo to remove the hinge out of the toilet you need Philips screwdriver or a little small spanner would also work but just in screw and unscrew that from the toilet. Just loosen these off firstly.
How are toilet seats attached?
Most toilet seats are attached to the toilet with fittings. These are held together by two bolts usually hidden by plastic caps at the back of the seat. You may need to crouch or get on the floor to access them properly. If there are plastic caps over the nuts, use your flathead screwdriver to remove them.
Can I replace my RV toilet seat?
If it's a matter of an uncomfortable toilet seat, many RV toilet seats can be removed and replaced with a more comfortable style. Many RV manufacturers have ensured their toilet seats are of standard size for cases like this. Consider this easy upgrade if it's just a matter of comfort.
Can I replace my RV toilet seat with a regular toilet seat?
You can replace your RV toilet seat if you want to, but you need to keep the seat pretty close in size to the bowl. If you can find a regular, say American Standard or similar brand toilet seat that fits well enough, you can replace it with that.
How do you install an RV toilet seat?
1:383:45How to replace RV toilet seat in LESS THAN 5 minutes (Easy DIY fix)YouTubeStart of suggested clipEnd of suggested clipAnd those screws have to go through both the lid and the seat in order to secure them to the boltMoreAnd those screws have to go through both the lid and the seat in order to secure them to the bolt the first step is to remove the old. Seat the next step is to install the new seat and the.
How do you remove a quick release toilet seat?
1:148:01How to Remove & Replace a Toilet Seat (Soft Close & Quick Release)YouTubeStart of suggested clipEnd of suggested clipToo so once both the nuts have been removed on either side the lid should then just lift out like soMoreToo so once both the nuts have been removed on either side the lid should then just lift out like so and you'll be left with these two holes ready to add the new toilet seat.
How do you remove a American Standard toilet seat?
0:131:27American Standard Toilet - How To Remove and Replace Toilet SeatYouTubeStart of suggested clipEnd of suggested clipCheck under here to see if there's a wing nut or a bolt that you have to hold in place and once youMoreCheck under here to see if there's a wing nut or a bolt that you have to hold in place and once you hold in place you can go ahead and screw unscrew this and remove the seat.
How do you remove a soft close toilet seat UK?
1:313:51How to remove and install toilet seat fit soft close - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then that sections ready to come in so do the same on the other side. And then once that's off.MoreAnd then that sections ready to come in so do the same on the other side. And then once that's off. The whole thing will come undone. Yeah we can finally open up a new.
How long does it take to remove a Thetford toilet?
Removing it is pretty simple, and you can do it in just under 15 minutes if you follow the steps stated down below.
How to access the front bolt on a Thetford toilet?
If you have a front and back bolted Thetford toilet, the best way to access the front bolt is by simply pressing down and holding the foot flush lever. On the other hand, to gain better access to the rear bolt, you can lift the seat cover. Then, take away the access hole that is the upper part of the hopper. Once you do this, you can now easily reach the back bolt. After that, use your 12-inch socket wrench extension and unscrew the rear nut.
What is a bolt cover for an RV toilet?
RV toilet bolt covers are what make them look seamless. It also keeps the actual bolts from being accidentally unscrewed for whatever reason and from corroding. So, when removing your Thetford toilet, you must remove it.
How to remove a bolt cover?
To do this, you will need to use a flathead screwdriver. Just put the tip of the screwdriver to the seams of the bolt cover and lift up. There are usually two of these, so you just have to do the same step to the other bolt covers.
Can you remove a Thetford toilet from an RV?
Whether you are replacing your RV’s permanent toilet or you just want to thoroughly clean your existing Thetford toilet, removing it off its fixed position is not that hard. All you need to do is carefully follow the steps mentioned above, and you are good to go. Let us know what you think of this tutorial down below and share some of your Thetford toilet removal experience as well.
How to remove toilet seat?
It’s a good thing most toilet seats can be removed easily by unfastening their connecting nuts and bolts. Should the hardware fastening your seat resist your best efforts, detach the stubborn seat with a socket set, a hacksaw, or a drill. Prevent corrosion and make the next removal easier by maintaining the seat through regular cleaning and by replacing worn out parts.
How to fix a crack in a toilet seat?
Fill small cracks in wooden toilet seats with white or clear silicone to prevent buildup of bacteria. For large cracks, remove the seat and fit a new toilet seat in its place. Avoid using bleach to clean wooden toilet seats, as it can damage the wood as well as the metal hinges and bolts.
How to tighten a toilet bolt?
Rubber bushings can be bought at your local hardware store or home center. Slide the circular, rubber bushings up the threading side of the bolt with the tapered side of the bushing facing up at the toilet. Then tighten the nut with the tightening tool that came with the bushings.
How to break a toilet nut?
Some toilet designs may require a deep socket or socket extension for you to reach the nut. Turn the socket counterclockwise firm ly to break the nut loose. Apply steady moderate force with your socket wrench. If the nut doesn’t loosen, intensify the force on your wrench to high for a very short interval.
How to protect a toilet seat from scratches?
Take a broad knife, like a putty knife, and position it so it covers the porcelain of the toilet around the head of a bolt. This will protect against accidental scratches when you saw. Cut away at the hardware fastening the seat to your toilet a little bit at a time with the hacksaw. This process may take a while.
Why are the nuts on my toilet seat not sliding?
If the toilet seat isn't sliding around, the nuts are tight enough. You don't actually want to overtighten those nuts, since you may end up cracking the porcelain . If that happens, you're going to need to buy a new toilet!
How to open bolt covers?
Use light pressure when opening the bolt covers. Generally, it takes little pressure to open these, and using too much force may cause damage to them.
How to remove the rear nut on a Thetford toilet?
To gain access to the front bolt, press and hold the foot flush lever down. To gain access to the back bolt, lift up the seat and cover and remove the access hole, which should be located on top of the hopper. Then use a 12-inch extension with a universal and a 12-inch deep-well socket to remove the rear nut.
How long does it take to remove a Thetford toilet?
It only takes about 15 minutes to successfully remove a Thetford toilet, and you can do it all on your own. Here's how. Turn off the water supply that runs to the toilet by turning the water pump switch to "off.". If the water hose is connected on the outside of the motorhome, make sure to disconnect it. Turn off the water supply valve ...
What is a Thetford toilet?
Thetford toilets are the most commonly used permanent toilets in all but the most expensive of RVs, so it's important for motorhome owners to know how to navigate them. There are several different models of Thetford toilets, but the removal instructions for each of them are similar.
How many bolts does a Thetford toilet have?
Thetford toilets usually have two toilet bolt covers. Depending on the model of the toilet, there will either be a bolt cover at the front and back of the toilet or at the left and right side of the toilet. Remove the bolts using a half-inch socket wrench.
What Are the Steps for Thetford RV Toilet Removal?
Make sure that you switch off any water source that is coming and going to the toilet. Either turn off your water pump or remove the water hose from the pipe valve that connects you to the city’s water supply.
What Is a Thetford RV Toilet?
To camper van owners, Thetford is a well-known manufacturer of camper van toilets. Its products are lightweight, stylish, and durable, and available in different options you can choose from according to your preferences.
What makes RV toilets different from other toilets?
RV toilets also come in different types and designs. Oftentimes, what makes them different from one another is the flushing system.
What is macerating flush toilet?
The RV macerating flush toilet comes with a built-in flush system. This system has a motor-powered blade that crushes any waste prior to its transportation to the waste tank or the black tank. The process of grinding helps in making the waste turn into fluid.
Do you need nuts and bolts for a Thetford RV toilet?
Note: Most likely, your newly purchased RV toilet will come with a Thetford RV toilet seal replacement with nuts and bolts. However, it is better to be prepared and keep the old toilet bolts in case the new toilet doesn’t have them.
Do you have to replace a Thetford toilet in an RV?
Time will come where you will have to replace your RV toilet, especially when it has completely worn out. Therefore, it is necessary to learn in advance how to remove a Thetford RV toilet.
Do Thetford toilets have ergonomics?
Thetford toilets have an ergonomic characteristic to ensure a comfortable and elegant experience, even if you have to go to the loo while you are on the road.
granny60
I have swivel toilet in my Bailey caravan . I would like to remove the seat and lid, but I am concerned about breaking it. Any advice how to do it please
shipbroker
If this is the more or less standard Thetford set-up they are on little studs that pop in and out of the sides,little pressure needed at all.
Woodentop
You need to take the lid off first, then the seat. Re-assembly is the reverse.
