Step-by-Step Guide to Replace Your Lift Supports
- Assemble the Right Tools To replace lift supports, you’ll need various tools: A flathead screwdriver ...
- Support the Application When replacing lift supports, you need to use the right safety stand whenever the installation procedure requires you to work under the support or vehicle. ...
- Inspect the End Connections ...
- Remove the Old Supports ...
- Install the Replacement Lift Supports ...
Full Answer
How do you replace the struts on a hood lift?
Remove The Current Struts You will need to remove the hood lift installed on your vehicle. You can do this by removing one and replacing it with the new lift support before removing and replacing the other. You will need to use a flathead screwdriver to remove the retaining clips, then the struts themselves. 3. Remove The Ball of The Strut
Can I install a new hood lift support myself?
If the struts on the hood of your car are failing and you want to install a new hood lift support, you can easily do so yourself. Installing new supports will ensure the reliability and performance of your vehicle, as well as your safety when working under the hood.
What do you call the parts that support the lift?
We generally call them "props," but I've heard other terms like lift supports or arms. They are very easy to replace, but for some reason, most people make the process way too complicated.
How do I install replacement lift supports?
0:422:04How To: Install Tailgate Lift Supports On Your Vehicle - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse your flat-head screwdriver to pry the clips loose at both ends of the support. Be careful andMoreUse your flat-head screwdriver to pry the clips loose at both ends of the support. Be careful and wear eye protection. Because these clips are under tension and can pop out quickly and unexpectedly.
Can Lift supports be repaired?
Punctures or leaks are quite common with these trunk supports, which is why you will have to keep an eye out for issues. For the most part, you will not be able to repair these lift supports. The best way to fix any of the issues that you face with your trunk lift supports is by getting them completely replaced.
How do you replace rear door lift support?
2:083:57How To Replace Rear Hatch Struts - Make Your Liftgate Stay Open Again!YouTubeStart of suggested clipEnd of suggested clipFirst the top of the lift gate is very similar to the bottom again there's a little slot here youMoreFirst the top of the lift gate is very similar to the bottom again there's a little slot here you can get your screwdriver. In and twist. It to pry that metal band. Out.
What is a lift support?
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications.
How long do lift supports last?
The hood lift supports on your car can last for about 50,000 miles or so before they need to be replaced. There are a variety of things that can lead to the demise of your hood lifts, but usually it is a leak in the pneumatic valve.
How much does it cost to replace liftgate struts?
The Best in Auto Repair The average cost for liftgate support strut replacement is between $126 and $134. Labor costs are estimated between $30 and $38 while parts are priced at $96. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
How do you install a gas spring lid support?
0:002:03Gas Spring Installation: How to Mount & Unmount Gas Springs - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just push they snap right on with just a little bit of force. You want to mount them. At theMoreYou just push they snap right on with just a little bit of force. You want to mount them. At the extended length never try to compress it and mount it in a compressed configuration.
How do you remove boot struts?
1:263:00How to Replace the Boot Strut Gas Springs on Your Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff replacing the ramp is even simpler than taking it off you just push it onto the ball joints. AndMoreOff replacing the ramp is even simpler than taking it off you just push it onto the ball joints. And that is all there is to it.
Why won't my gas struts compress?
If your gas strut will not compress you need to let more gas out of it. The pressure is too high for the strut to compress under the weight of the door. If all the gas has been released out of the strut and it still won't compress it is likely that your struts have been overextended.
How do you fix a lift on a strut?
0:002:20Cheap fix for gas lift struts supports How to - YouTubeYouTubeStart of suggested clipEnd of suggested clipI make a little pose it's the length of the thing. However big I want it to be when it's extended.MoreI make a little pose it's the length of the thing. However big I want it to be when it's extended. And then make a slit down the end of it and then little v's on the end. So just push it in there.
How do you replace gas struts?
1:444:44Simple how-to: Replace gas struts / lift supports on any vehicle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to remove the old struts. It's really a very simple. Process you simply make sure you pull thatMoreSo to remove the old struts. It's really a very simple. Process you simply make sure you pull that clip out using your screwdriver.
What is a trunk lift support shocks?
Trunk lift support shocks are an important safety component that hold your door open, allowing you to focus on groceries or holiday packing. It's only when these shocks begin to fail that you realize the load they carry.
What is a lift support on a car?
Lift supports keep your trunk, hood, hatch, or liftgate up so you can easily access these areas while doing repairs or loading and unloading cargo. This gas-powered component works with a small compression system, storing and releasing energy as you access your vehicle's compartments.
How do you remove bonnet gas from struts?
1:444:44Simple how-to: Replace gas struts / lift supports on any vehicle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to remove the old struts. It's really a very simple. Process you simply make sure you pull thatMoreSo to remove the old struts. It's really a very simple. Process you simply make sure you pull that clip out using your screwdriver.
How to replace a lift?from instructables.com
Once the rear is open take your new support and roughly compare it to the old. Checking to see that the length looks about right and the design looks similar. Make sure you remove and replace one support before starting the next. This is a safety precaution as well as a way to potentially save time. If for some reason, when replacing a lift, you find it is not correct you only need to fix the one and not both.
What is the first picture of a lift support?from instructables.com
The first picture is the top of the support. It is important to note the top has a ball shape and where the bolts are located it is shaped like a triangle. With the point of the triangle angled in, towards the inside of the car. The second picture depicts the bottom of the lift support. Notice that one side is flush with the car. When replacing the lift this should be fairly easy to remember because it will only fit a specific way.
What wrench do I use to remove a ratchet?from instructables.com
When taking off some of the bolts the ratchet will not fit. This is when you will use the 10 mm wrench. I recommend using an adjustable wrench so, you do not have to keep picking it up and fitting it on.
How many bolts should be removed?from instructables.com
A total of 4 equally sized bolts should be removed. Place them in a pan to ensure you do not lose them. Also, compare the new support to the, now detached, old support. Again checking that there are no huge differences.
Where is the part number on a strut?from sgs-engineering.com
Finding the right strut is not a massive challenge thanks to the fact that all struts come with a part number located on their cylinders. This means that you can enter the part number into our search box (after removing hyphens and spaces) and you’ll find the right strut. Once ordered, we process your quote usually within an hour, and we deliver next-day.
Do you need to remove the attachment support pieces?from instructables.com
You don't need to remove the attachment support pieces. The ball unit is removable and then you simply snap the new one in place. I just changed the both of mine. And I don't know where you bought yours at for $70 dollars, but I bought my two for $13 dollars shipped to the home. EBay has them listed everywhere for near nothing. And with the exact same part numbers as well. You are very correct though with the weight of the hatch. You absolutely need to support the hatch or have some one else help you. Good project though.
Is the lift support broken?from instructables.com
When you are examining your new lift support you will not be able to make it go in and out yourself, this does NOT mean it is broken. If you can, move the support easily, then it is faulty and needs to be replaced. The lift support needs a lot of resistance because the door weighs a few hundred pounds. In the picture I am placing all my weight and the lift support still does not collapse.
How to remove ball socket end?from stabilus.com
Remove ball socket end by prying back metal spring clip with a small screwdriver while lightly pulling lift support away from mounting stud. Be careful not to detach spring clip when removing lift support.
What is a LIFT-O-MAT gas strut?from stabilus-struts.com.au
The LIFT-O-MAT gas strut is a hydropneumatic adjustment element consisting of a pressure tube, piston rod with piston, as well as a suitable end fitting. They filled with nitrogen, which acts on piston cross sections of different sizes, creating a force in the extension direction.
What are the advantages of Lift O Mat?from stabilus-struts.com.au
Among the advantages of Lift o Mat gas springs – compared with mechanical springs – are their defined speed curve and excellent damping properties, which make handling lids and doors comfortable. Ease of mounting, compact dimensions, a flat spring characteristic curve and a very broad selection of available strengths and end fittings round out the positive overall picture of LIFT-O-MAT gas springs.
Where are lift supports connected?from shop.advanceautoparts.com
The supports are connected at the top to the hatchback, and at the bottom to the vehicle . Depending on the vehicle and the type of replacement supports and whether new hardware is included, it may be recommended to also replace any hardware where the supports attach. It’s critically important to replace the lift supports with new ones that are an exact match to those that were original equipment on the vehicle.
How much does it cost to replace a lift support on a 2004 Subaru Outback?from shop.advanceautoparts.com
Fortunately, replacing the lift supports is a fairly easy, inexpensive job, with new lift supports on this ’04 Subaru Outback totaling a little over $50 for the set, a cost that differs depending on the vehicle.
How to replace hatchback supports?from shop.advanceautoparts.com
To replace the supports, first find a willing helper to hold the hatchback in the upright position. Using material alone, such as a piece of lumber, to prop the hatchback open isn’t the best idea because if the material slips, the hatchback comes crashing down on you. The supports are under pressure so use care when removing them and wear safety glasses. Don’t heat or cut into the supports, or attempt to close them manually when they’re detached from the vehicle.
How to install a lift support?from liftsupportsdepot.com
To install the new lift supports, start with the shaft end first. Place the ball socket over the ball stud on your vehicle and use your fingers to apply some gentle pressure until it pops into place. Grab the body of the gas strut (the thick steel cylinder) and turn it one full turn clockwise to release the lift support cylinder.
What to do if lift supports are not working?from liftsupportsdepot.com
That’s why you should regularly check the condition of your lift supports. If your lift supports are no longer working as expected, replace them immediately . Replacing your failed unit will easily restore your lift support application to its original condition.
How to replace a gas strut?from liftsupportsdepot.com
Turn the gas strut until the ball socket is right on top of the ball stud. Push it gently onto the ball stud. After you’ve installed both ends of the gas strut, tug it gently to be sure that it is securely attached to the vehicle. No complicated tools are needed when you want to replace lift supports. Repeat this procedure to remove and replace the other gas strut.
How to remove ball socket lift support?from liftsupportsdepot.com
Do this slowly and pull it away from the vehicle until it releases. Avoid pulling off the U-band all the way or using force, as it will fly off and could hurt you or someone nearby. Doing it correctly will ensure you replace your lift supports with ease.
Why replace gas lift support?from liftsupportsdepot.com
Factors like frequent usage, temperature changes, and driving environments can affect the lifting power of your gas struts. That’s why you should regularly check the condition of your lift supports. If your lift supports are no longer working as expected, replace them immediately. Replacing your failed unit will easily restore your lift support application to its original condition.
Should lift supports be replaced in pairs?from liftsupportsdepot.com
Factors to Keep in Mind. Lift supports for hoods, liftgates, trunks, or other non-automotive applications should always be replaced in pairs. Don’t remove the lift supports at the same time. Instead, remove one and replace it, and then remove and replace the second one. Make sure that you always install new ball socket lift supports in ...
When replacing lift supports, do you need to use a safety stand?from liftsupportsdepot.com
When replacing lift supports, you need to use the right safety stand whenever the installation procedure requires you to work under the support or vehicle. For your own safety, it’s better to have someone hold the hood, trunk, or other lift support application open for you so that they can raise it and lower it as needed.
It's Time to Finally Replace Those Worn-Out Props That Hold That Back Door Up
After many years of selling truck tops, toppers, camper shells, canopies—whatever you want to call them—I have learned that the absolute number-one-selling item when it comes to repairing or maintaining any top is the gas-pneumatic arms that hold up the rear door.
Identify the Size and Weight Rating of the Camper Shell Lift Struts
You first need to identify what you have. This is probably the most important part of the process; you need to know exactly what you're replacing before you can replace it. Not to worry, it's really quite easy and I will explain.
Why do you need to replace hood lift support?
To ensure the dependable performance of your hood lift supports, it’s always important to replace them if there are signs of wear and tear on the hinges, connection points, or any twisting that is caused by uneven loading. If the struts on the hood of your car are failing and you want to install a new hood lift support, you can easily do so yourself. Installing new supports will ensure the reliability and performance of your vehicle, as well as your safety when working under the hood. At Lift Supports Depot, we offer the world’s largest lift support database so you can easily find the right replacement gas struts or parts you need for a complete installation.
How long has Lift Supports Depot been in business?
Lift Supports Depot has been in business for over 40 years and provides parts that have been tested for reliability and performance. If you happen to run into any problems, we provide personal customer support to help guide you through the process. Contact us with any questions you might have about your parts or the installation process.
Can you hold the hood up while installing a hood lift?
You won’t be able to hold up the hood while you install the aftermarket hood lift, so you will need to find someone to help you. You can also use the hood support bar if your car has one. Never use a prop stick to hold up the hood, as it could easily fall off or break. If the hood were to fall on you during installation, it could cause serious injury.
Where do you slip a ball out of its socket?
Slip the ball out of its socket at both ends.
How to secure a ball in a socket?
Snap the ball on one end into the socket, making sure the clip is secure, then do the same thing on the other end. After securing the support on the first side, repeat this process on the other side.
