Insert a thin flat headed screwdriver into the slot next to each wire; twist the screwdriver and pull the soldered ends of the wires out. If the wires are connected to the terminals with screws, undo the screw a few turns and pull the terminals out from under the screw heads. Undo the two screws holding the switch to the fan and remove it.
Can You reattach a pull chain switch to a ceiling fan?
With most ceiling fans that have pull chain switches, you’ll need to replace the switch. However, that’s not the case with every fan. On some Hampton Bay models, it’s possible that you can reattach the chain. An important thing to note – does this switch operate the light, or the fan?
How to replace the switch on a Hampton bay ceiling fan?
How to Replace the Switch on a Hampton Bay Ceiling Fan 1 Turn the breaker switch supplying power to the ceiling fan to the "off" position. ... 2 Place a step ladder under the fan and have someone hold it steady while you're working. 3 Remove the switch housing from the fan with a Phillips screwdriver. ... More items...
How do you remove the switch on a ceiling fan?
Remove the cover on the housing of the ceiling fan, so you’re able to get to the switch. Loosen the nut on the outside of the switch, which is holding it in place.
How do you fix a fan that won't turn on?
Screw the switch back onto the fan the same way your removed it. Thread the chain through the housing and replace the brass finial and screw the housing back onto the fan with the attaching screws removed earlier. Restore power to the fan by flipping the breaker switch back to the "on" position.
Can you replace the pull chain on a ceiling fan?
A broken pull chain on a ceiling fan almost always requires replacement of the on/off switch as a repair. A few models do allow you to reattach the chain, but you must access the switch before determining whether your fan is one of them.
How do you remove the pull chain from a ceiling fan?
2:057:50How To Replace A Broken Pull Chain Switch On A Ceiling Fan - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis you unscrew it counterclockwise lefty loosey that piece comes off that's what's holding it inMoreThis you unscrew it counterclockwise lefty loosey that piece comes off that's what's holding it in place and then you can just push that back in and you can see that. This is the piece that.
How do you reattach a pull chain?
InstructionsDecide if the Repair is External or Internal. ... Remove the Metal Collar. ... Open the Ceiling Fan Base. ... Pull out the Pull Chain Switch. ... Cut the Wires to the Ceiling Fan Chain Switch. ... Attach the New Pull Switch to the Ceiling Fan. ... Thread the Pull Chain Through the Hole. ... Reassemble and Test the Ceiling Fan.
How do you replace a ceiling fan pull chain switch?
0:504:56Ceiling Fan Pull String Light Switch Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn order to replace the chain is this little switch in the middle here. And it's very easy to takeMoreIn order to replace the chain is this little switch in the middle here. And it's very easy to take out all you need to do is unscrew the screw that holds.
How do you put a chain back on a ceiling fan?
4:517:09Ceiling Fan Pull Switch Broken Chain Replace Fix Hampton Bay - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you're going to first put the chain. In. There we go so you're gonna put the chain through theMoreSo you're going to first put the chain. In. There we go so you're gonna put the chain through the first follow up with the rest of the switch. And now it's sticking out of the hole there.
How do you open a pull chain switch?
0:595:02Ceiling Fan pull chain repair - WITHOUT buying any partsYouTubeStart of suggested clipEnd of suggested clipYou can pull out the switch fits inside and the switch actually comes apart it's got some littleMoreYou can pull out the switch fits inside and the switch actually comes apart it's got some little spring tabs that you can pull or pry out with a small screwdriver. And pop the switch. Apart. So now I'
How do you stop a ceiling fan with a broken chain?
If even a small bit of the chain is left, you may be able to pull it using needle nose pliers. If the fan is connected directly to power (not controlled by a wall switch), you'll probably want to shut off the breaker to stop the fan while you do this (so you don't loose your head).
How do you put a chain back in light?
2:534:16How To Repair A Pull Chain Light Fixture | How To Change A Broken ...YouTubeStart of suggested clipEnd of suggested clipAnd then a skinnier area and that allows you to you know start screwing the screws into the holesMoreAnd then a skinnier area and that allows you to you know start screwing the screws into the holes own when you've got them about halfway screwed in you can get your fixture up there and inserted.
Are ceiling fan pull chain switches Universal?
Switches are not universal, so you will likely have to remove the defective switch before searching for a replacement part.
How do you replace a pull string light switch?
0:005:19How To replace a pull cord light switch - Your local Electrician - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn here we've got a red cable a cable with a brown sleeve on it that's indicating it's the switch toMoreIn here we've got a red cable a cable with a brown sleeve on it that's indicating it's the switch to life. And a cable here with green and yellow sleepers on earth cable.
How do I know if my ceiling fan chain is bad?
If there are no loose wires visible, the culprit is likely a faulty pull chain switch. To check, turn off the power at the breaker box, and disconnect the wires coming from the switch to the lights. Be sure that the wires are not touching anything before you turn the power back on, and test the wires with a voltmeter.
How to restore power to fan?
Restore power to the fan by flipping the breaker switch back to the "on" position. Operate the pull-chain to see that the fan is working properly through all the speed settings.
What are the terminals on a 3 speed fan?
Draw a sketch showing the position and colors of the four wires connected to the switch; on a typical 3-speed fan, the terminals are marked "L-1-2-3." Alternatively, they could be marked "A.B.C.D."
What to do if you can't identify breaker switch?
If you cannot identify the particular breaker switch, turn the main switch on the electrical panel to the "off" position before starting work.
