how do you replace curtain rod cords

How to repair a wire curtain rod?

Oct 05, 2008 · -Make sure that the cord in the pulley is one on the top and then looping the other through the bottom side.-Try both cords, i mean the secondario carrier should be slitted into the cord in which you want to perform that function, either one will do what you want it to do. Center drawn or 1 way stackered. Also make sure that your cords

How to shorten a curtain cord?

Oct 31, 2011 · This video is created for the purpose of show you how to change you track cord

How to fit new cord to curtain tracks?

Remove the drapes from the rod and remove the rod from the window. Lay the rod on a table with the window-side of the rod visible. Remove the old cord. Cut a piece of cord equal to twice the width of the curtain rod and twice the distance from the rod top to the floor,...

How to repair curtain rope?

Step 1 Remove the existing drapery cord from the right side of the rod by cutting the knot off the end of the cord with a pair of scissors then pulling it through the pulleys and housings of the rod. Step 2 Measure the length of the cord you removed. Add about 6 inches to the length and cut a new length of cord. Step 3

How do you restring a corded curtain track?

3:084:07Restring Traverse Cord, CENTER Draw, Split Stack, 2 way drawYouTubeStart of suggested clipEnd of suggested clipYou have two choices. You can either pull the court. And make a knot. So. This guy's they at oneMoreYou have two choices. You can either pull the court. And make a knot. So. This guy's they at one place it cannot move it can pull the other side of the have a heavier fabric that's one way. If you don

How do you fix a pulley on a curtain?

Unscrew the brackets that hold the rod in place and take the rod down. Pull the cord from the rod, cutting it free from any tangles. Place the rod with the hardware facing up and feed the new cord under the top pulley on the left end of the rod. Maneuver the new cord into the rod's track and through the opening.

How do you install a curtain pulley?

Install a single stationary pulley on the left end of the curtain rod. Ensure that the top of the cord path through the pulley is level with the center of the eye screws on the wooden rings. Install a double stationary pulley on the right end of the curtain rod. Shim the pulleys if necessary.

What are Pull String curtains called?

Traverse curtain rodsTraverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.Sep 3, 2019

How do I remove drapes from a window?

Place a ladder close to your window, and remove the drapes by unhooking them from the master carriers and slides of the curtain rod system. Drapes are often quite heavy, so be careful, particularly with tall windows.

What is a traverse rod?

Curtain rods that use drawstrings on the side of the drapes are a type of traverse rod. Often children or guests will pull on the fabric of drapes not realizing that the drape operates on a string. This can break the string, or the string can wear out from sun damage.

How to tie a cord to a pulley?

Take your cord to the left and between the top and bottom pulley. Pull the cord through. Take the end of the cord up and over the top pulley and move toward the right. Find the hole on the top left of master carrier A, and tie the end of the cord to that hole.

How to remove a cord from a master carrier?

Cut and remove the cord, including the knots. Use a utility knife. Discard the old cord. Thread new cord into the top hole on the right side of master carrier A. Knot the cord. Take the cord to the right and over the top pulley. Take the cord down and between the top and bottom pulleys.

How to make a drapery carrier?

Start with the back master carrier. Thread the hole farthest out on the arm. Thread the drapery hook from the back to the front. All other hooks thread from the front to the back and should be evenly spaced across the carrier and then on each slide. Save the last two hooks for hooking into the bracket.

What degree did Mary Ann Smith have?

She is a graduate of the University of California at Berkeley with bachelor's degrees in psychology and English. Her fiction short story "Black Ice" recently won a National Space Society contest.

How to remove slack from a track cord?

Remove all the slack from the cords in the track channel by moving the overlap and underlap carriers to meet in the middle. Hold them in position while you pull the draw cord and remove any slack.

What is the other center carrier in curtain?

The other center carrier is the underlap carrier. These two components meet in the middle when the curtain is drawn. The overlap carrier positions the left center edge of the curtain over the right center edge.

How to secure a pulley?

Secure the Cord Around the Pulleys. Roll the cord over the top outside pulley, down the outside edge and back up between the two pulleys. Use your tool to move the cord over the left pulley. Pull up the slack. The cord must be secure around the pulleys on this side of the rod.

Where do curtain rods meet?

There are two components parts of the rod that meet in the middle. One has an arm that fits over the other component. This is the overlap carrier, and it is typically on the left side of the curtain rod. The other center carrier is the underlap carrier. These two components meet in the middle when the curtain is drawn.

Where is the underlap carrier on a pulley?

The underlap carrier, which is to the right of the center, also has two small holes parallel to the track channel.

Where are the pulleys on a fishing rod?

Look at the pulleys in the end of the rod. There are two pulleys at each end. One is close to the outside edge of the rod and toward the top of the rod. The other is slightly below the first pulley and toward the center of the rod. There is also a cord channel on the window side of the rod through which the cords and pin carriers travel.

Can you rethread a curtain cord?

You can rethread a curtain pull cord and be assured of a successful outcome if you take a bit of time and follow drapery installers' cord-threading tips, according to Zebra Blinds.

How to tie a traverse cord?

Insert one end of the cord through the pulley housing at the far left edge of the rod. Pull the end of the cord through the housing of the overlap master carrier -- the first carrier that moves the drapes back and forth along the traverse rods. Tie a knot in the end of the cord that is large enough to prevent the cord from slipping out ...

How do I remove drapery cord from a rod?

Remove the existing drapery cord from the right side of the rod by cutting the knot off the end of the cord with a pair of scissors then pulling it through the pulleys and housings of the rod.

How does a traverse drapery rod work?

A traverse drapery rod uses a cord system to draw the drapes. A traverse drapery rod allows you to open and close the drapes by pulling a draw cord that hangs from the rod along the side. Draperies on a traverse rod might open from the center, or they could open in one direction toward either the left or right side.

How to keep a cord from slipping out of a master carrier?

Check the cord to ensure it is the correct length. Tie a knot in the cord to prevent it from slipping out of the master carrier. Trim off any excess cord length with the scissors.

Where to thread a pulley on a fishing rod?

Thread the cord between the two pulleys on the right side of the rod, up and around the top pulley and direct it back toward the left side of the rod.

Who is Kathryn Hatter?

Kathryn Hatter is a veteran home-school educator, as well as an accomplished gardener, quilter, crocheter, cook, decorator and digital graphics creator. As a regular contributor to Natural News, many of Hatter's Internet publications focus on natural health and parenting.