How do you replace recessed lighting with ceiling tiles?
- Insert the light bulb into the recessed lighting housing.
- Attach the trim ring to the rim of the light can.
- Restore power to the room and turn on the lights to test them.
How to replace a ceiling box with recessed lighting?
- Use the template provided with your light kit to draw the outline for each opening.
- Use a stud finder to make sure the holes do not overlap a joist.
- Drill a 1/4-inch hole in the ceiling at the center of the planned opening.
- If necessary, go into the attic and make sure there are no wires, pipes or ductwork behind the planned opening.
How to replace a ceiling light with no ground?
- Examine the fixture Check if the manufacturer has grounded the fixture in any other way instead of using an actual ground wire. ...
- Locate the ground screw Sometimes a ground screw is present, which is green in color. ...
- Locate the copper wires The copper wire from the fixture and copper wire from the supply can be joined together with the ground screw.
How do I replace light bulbs in a tall ceiling?
Things You'll Need
- Reacher grabber
- Safety goggles
- Replacement bulb
How do you replace the insulation of ceiling light?
You could hire an electrician to replace each fixture with a sealed one rated for insulation contact (IC). But here’s another solution, which you can do yourself: Go to a home center and buy a fire-rated recessed light cover, like the ones made by Tenmat, for every fixture.
How do I replace recessed lighting with ceiling fixtures?
InstructionsOpen the Fixture and Test for Power. Remove the dome or shade on the ceiling light, then remove all light bulbs. ... Remove the Fixture. ... Cut Out the Fixture Hole. ... Remove the Old Box. ... Connect the Circuit Cable. ... Connect the Fixture Wires. ... Install the Recessed Fixture. ... Turn On the Power.
What can I replace my recessed lighting with?
In fact, most remodeling recessed lighting uses LED bulbs because of the ease of installation, as well as the energy efficiency. LED bulbs last much longer than other kinds of light bulbs. You won't have to change them as often once you make the switch. An LED bulb can stay lit for as long as 50,000 hours.
How do I convert recessed lighting?
0:404:04How to Change a Recessed Can to a Pendant Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipBelieve it or not we only need a few things a screwdriver a drill a pair of needle nose pliers. AndMoreBelieve it or not we only need a few things a screwdriver a drill a pair of needle nose pliers. And a recessed can converter.
Is recessed lighting outdated?
Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.
How do I remove a recessed ceiling light?
0:462:46how to replace LED recessed downlights - remove and install ...YouTubeStart of suggested clipEnd of suggested clipAs you pull at the an so it doesn't clamp back on your fingers. And you simply pull that wire downMoreAs you pull at the an so it doesn't clamp back on your fingers. And you simply pull that wire down as it comes out you'll find that it's got a plug.
How do you change a recessed light to a flush mount?
1:507:29Recessed Light Converter Flush-mount Light Fixture - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo start off by removing the light bulb. And the recessed strength. This is a socket pigtail it getsMoreSo start off by removing the light bulb. And the recessed strength. This is a socket pigtail it gets screwed into the recessed light medium base socket and this is how we get the power to the pendant.
What is a retrofit recessed light?
In general, retrofit is the process of adding a new component or accessory to an existing item. In the case of recessed downlighting, retrofit specifically refers to upgrading the lamp source, usually to a newer technology like LED, while retaining the existing above-ceiling fixture and lighting layout.
Can you replace a recessed light with a ceiling fan?
There's really no problem in replacing an existing light fixture with a ceiling fan in terms of the electrical needs. But what you really have to be careful of is to make sure the electrical box that the light fixture is attached to will support the extra weight of the ceiling fan.
Prep Work from the Electricians
So, I say we DIYed this project, but in reality, we did need to have the electricians come and do some preliminary work. But, it was only about 90 minutes of work instead of 16 hours. That’s a much smaller bill!
Diagraming the Basement Ceiling
Before the electricians came, however, we did a decent amount of prep work. First, Ken made a “map” of all our ceiling tiles. He made notations where the ceiling tiles could not be used for lights, such as ceiling tiles that already housed air conditioning vents, where we mount our movie projector, and where we have speakers mounted in the ceiling.
Lighting Zones
Next, we needed to decide how many switches we wanted. We did this by deciding on different “zones” for our basement. We didn’t want all the basement lights to turn on at once. For instance, if we were working on a project on the one end of the basement, there would be no reason to have the lights on over by the couch and TV.
Removing the old, ugly light fixtures in preparation for the new ones!
Hopefully this goes without say, but WE ARE NOT ELECTRICIANS. Working with electricity is risky, makes me nervous, and you should always ask an electrician for help!
Testing that the Recessed Lighting Housing was Set Up Correctly
And now it was time to play god and proclaim LET THERE BE LIGHT. Just kidding, it was just time to install the lightbulbs temporarily to make sure that everything was wired properly. (We use these dimmable lightbulbs, because we had dimmable switches installed).
Cutting Holes in Ceiling Tiles for Recessed Lighting
Now it was time to actually make those lights look pretty in the ceiling. That involved cutting holes in our ceiling tiles.
Installing Recessed Lighting Trim Piece
But, of course, it wasn’t quite done yet. Next we needed to install the trim piece. (We talked about the different trim options we considered back in Part 2 ).
Recessed Lighting Conversion Kits
Changing a recessed light bulb is not as simple as putting an LED bulb into the old fixture. Still, learning how to replace recessed lighting is not difficult with a recessed lighting conversion kit. These LED marvels install easily.
Check Existing Recessed Lights
Make sure that your existing recessed lights can be converted to LED by examining the mounting springs. The torsion springs on an LED retrofit light fit into the brackets within the housing. If your existing housing doesn't have those internal brackets, you'll have to replace the fixture with a universal type.
Connect the LED Light
Open the LED recessed lighting conversion kit and check to make sure you have everything you need before you’re standing on the ladder.
Smart LED Recessed Lighting
To really take your home’s recessed lighting to the next level, look for smart LED conversion kits. With these retrofit kits, you can convert traditional can lights into smart lighting.
Recessed Lighting - replacing old square recessed lights
I have a few older square recessed light fixtures - they are about 9 or 10 inches square and use ordinary light bulbs.
Comments (14)
You can still buy square recessed fixtures (just google 'square recessed lighting'), but you may spend a lot of time looking for a model that fits the holes in your ceiling. I would try and remove one, so you can measure the hole in the drywall.
