how do you replace rotten soffit

How do you replace rotten soffit?

1. Remove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar.
2. Remove Rotted Fascia. Remove the rotted section of fascia.
3. Remove Old Soffit. Pull down to remove the old soffit.
4. Remove Rotted Rafter.
5. Attach Cleat.
6. Attach New Rafter.
7. Seal Replacement Soffit.
8. Attach Replacement Soffit.

Full Answer

Why are my soffits rotting?

Unfortunately, rotted soffit is usually caused by leaks that drip down and collect in the gutters and on the soffit boards. It can also be caused by bad weather and pesky animals.

How do you remove and replace soffits?

Soffit and Fascia RepairRemove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. ... Remove Rotted Fascia. Remove the rotted section of fascia. ... Remove Old Soffit. Pull down to remove the old soffit. ... Remove Rotted Rafter. ... Attach Cleat. ... Attach New Rafter. ... Seal Replacement Soffit. ... Attach Replacement Soffit.More items...

Can you replace soffit without removing fascia?

It's best to remove the fascia before replacing the soffit. Because of the position of the soffit underneath the fascia, it would likely cause damage if you didn't remove it as well.

Can you put new soffit over old?

Yes clading over your original fascias or soffits is possible, however the original timber would have to be in a good state i.e not rotted, if it is rotted then the timber should be cut out and replaced, once the timber is covered with upvc cladding this will add a degree of protection to the original fascias.

How hard is it to remove soffit?

If you choose to remove your soffit, cut a hole in the side and look in there first. If it's empty, there is little difficulty in removing it. If it is full of pipes or duct work, the difficulty lies in rerouting these items. This means either opening the ceiling or the wall behind them to give them a place to go.

Is it worth it to remove soffits?

Removing them will make the ceilings appear taller, and offer more storage space. However, this space may be difficult to use if it is too high. You might find your soffits contain something important, such as plumbing or ductwork. In this case, it may not be worth removing them.

How often should soffits be replaced?

There is no definite timetable for replacing a soffit or fascia, but there are some signs that roof repair contractors look for when evaluating your roof's overall health.

How do you replace rotting fascia?

How To Replace Roof Fascia BoardStep One: Inspect the Existing Fascia. ... Step Two: Remove Gutters and Drip Edge. ... Step Three: Remove Existing Fascia Board. ... Step Four: Measure and Cut. ... Step Five: Cover the Seams. ... Step Six: Seal the Wood. ... Step Seven: Install Drip Edges and Gutters.

How do you fix rotted fascia?

Determine That You Actually Have Rot. Badly rotted window brickmould. ... Identify The Water Source. An example of fascia/gutters. ... Remove The Rotted Fascia Board. Cut the caulk line with a utility knife. ... Examine The Sub-fascia. ... Measure For Your New Piece. ... Cut The New Fascia Board. ... Attach The New Board. ... Caulk Everything.

How long does it take to replace soffits?

around 1-2 daysThe majority of jobs can be completed in half a day. If you are having fascia and soffit boards replaced, then you're looking at around 1-2 days worth of work. If your property has a lot of curved edges, or if it's an unusually large home, then the installation process might take longer.

What is the best material to use for soffits?

Fiber cement is a very durable soffit to install that requires very little maintenance, causing it to be highly regarded as the best soffit material. A fiber cement soffit is made up of sand, portland cement, silica, and cellulose fiber which achieves a smooth look.

What kind of wood do you use to replace soffits?

Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.

How are soffits removed?

To remove vinyl soffit panels, you will need to unmount or unlock both edges of the panel from the retaining channel on both sides. With the ladder positioned either toward the wall or the roof's edge underneath the soffit panel you want to remove, use the zip tool to free the panel from the retaining channel.

How much does it cost to remove soffit?

Expect to pay about $300 or less for isolated removal and replacement of soffit. It will cost about $3 to $7 per linear foot for removal and an additional $3 to $5.50 per linear foot for labor and materials.

Are soffits removable?

We often meet with homeowners who want to remodel their kitchens and are wondering if we're able to remove the soffit above their cabinets. The answer is a resounding “Yes!” Many homes in Central Florida were built with a soffit above their upper kitchen cabinetry.

How long does it take to replace soffits?

around 1-2 daysThe majority of jobs can be completed in half a day. If you are having fascia and soffit boards replaced, then you're looking at around 1-2 days worth of work. If your property has a lot of curved edges, or if it's an unusually large home, then the installation process might take longer.

How do I cut soffit boards?

First, with a pencil and a combination square, I mark the soffit boards where I need to cut. Then I cut off the deteriorated end of the board [B] and examine the pieces closely to determine if there is more deterioration to remove, in which case, I mark a new joint a few inches along, cut it off, and repeat the process until I hit structurally sound wood.

How to glue a part together on a scaffold?

Then I glue it into place with an epoxy adhesive. (Any flexible weatherproof adhesive will work.) After spreading the adhesive, I set the part in place and drive in the screws [F] to hold it tight until the adhesive cures.

How deep do splits go?

Often decay and splits are worst at the ends of the boards, with conditions improving further in. Splits usually continue at least a few inches deeper than are first apparent.

How do you know if your soffit is rotting?

. The soffit looks cracked and curls under the roof’s eaves, Some wood is completely missing from the soffit, There is water intrusion in your attic around the fascia, Animals have been sneaking into your attic, or.

What does it sound like when you tap on a soffit?

When you tap on the soffit’s wood, it sounds hollow.

What is the first part of a roof to be damaged?

Your whole roof will undergo some wear and tear over time, but—between erratic weather and pesky animals—a soffit is usually the first part of the roof to bear damage. When you notice your soffit beginning to mold or rot, it’s important to take care of it as quickly as possible in order to avoid further damage to your home.