How to Change the Pull Cord on a Poulan Weed Eater Use the screwdriver to remove the starter cover screws. Pull out the entire length of starter cord from the pulley.
How do you change the pull cord on a Poulan Weed Eater?
How to Change the Pull Cord on a Poulan Weed Eater Use the screwdriver to remove the starter cover screws. Pull out the entire length of starter cord from the pulley. Use the screwdriver to open up the plastic starter handle off of the old cord.
How do you replace the rope on a Poulan Trimmer?
The pulley spring on the Poulan trimmer will need to be tensioned before the rope can be replaced. Rotate the recoil pulley clockwise six to nine complete turns to put tension on the pulley spring, and line up the hole in the starter housing with the hole in the recoil pulley.
How do you replace the pull cord on a Stihl Weedeater?
Use the screwdriver to open up the plastic starter handle off of the old cord. Insert the new cord into the same center access hole that you pulled the old cord out of. Click to see full answer. In this regard, how do you replace the pull string on a Stihl weedeater?
Are Poulan string trimmers any good?
Poulan string trimmers are well-built, reliable trimmers that can help reduce the time it takes to groom your yard. Poulan offers many attachments that connect to your trimmer to aid you in other lawn tasks, such as edging and pruning. With proper maintenance and care, your Poulan trimmer will last many hours.
What happens if the pull cord on Poulan weed eater is broken?
Whether the pull cord on your Poulan weed eater is broken, worn out or not pulling in and out correctly, you will be faced with changing this cord. This cord is critical for getting your trimmer started, so you should always make sure it's working properly.
How to remove starter cover on Poulan?
The starter cover on most Poulan models is at the back end of the engine, near the muffler. Take off the starter cover and the starter cord should come off with it , because it's attached to the starter cover.
How to set the tension on a recoil spring?
Wind the cord around the pulley all the way. Hold the cover in one hand and pull out the cord two full pulley rotations to set the tension on the recoil spring. Repeat if necessary to get the proper tension on the cord. Screw the starter cover back into place over the engine.
What is a starter rope for a Poulan weed trimmer?
Starter Rope Replacement for a Poulan Weed Trimmer. Poulan string trimmers are well-built, reliable trimmers that can help reduce the time it takes to groom your yard. Poulan offers many attachments that connect to your trimmer to aid you in other lawn tasks, such as edging and pruning. With proper maintenance and care, ...
How many turns does a Poulan trimmer pulley need to be?
The pulley spring on the Poulan trimmer will need to be tensioned before the rope can be replaced. Rotate the recoil pulley clockwise six to nine complete turns to put tension on the pulley spring, and line up the hole in the starter housing with the hole in the recoil pulley.
How to tie a starter rope?
On the pulley side, tie a double overhand knot. Slide the starter handle on the other end of the rope and tie a double overhand knot in the cord to secure it.
How to remove starter from Poulan?
Separate the starter recoil housing from the engine housing cover on the Poulan trimmer. Remove the seven Allen bolts on the back of the engine with an Allen wrench and set these bolts aside on the workbench. Pry apart the two housings gently using a screwdriver. Place the recoil pulley on the bench facing up, and inspect the pulley for damage, such as bends or sharp edges.
How long does a Poulan trimmer last?
With proper maintenance and care, your Poulan trimmer will last many hours. In the event your trimmer’s starter recoil rope breaks, it will need to be replaced. Replacing the recoil rope on a Poulan trimmer, such as model number PP130, is done easily with common household tools.
How to use a trimmer for a small engine?
Place the trimmer on a flat work area, such as a workbench. Collect the necessary tools, including gloves, safety glasses, an Allen wrench set, a flat-head screwdriver and a new starter rope, from a hardware or small engine repair shop. Put on safety glasses and gloves to protect your eyes and hands from potential flying objects and sharp edges. ...