Follow these simple reset steps:
- Ensure the door with the Kwikset 888 SmartCode deadbolt with Z-Wave or 913/914 SmartCode is open and unlocked.
- Then go ahead and remove the battery pack.
- Press and hold the program button (this should be on the interior back panel of the lock) while re-inserting the battery pack.
How do I reset my smart key deadbolt?
0:211:36How to Reset Master Lock No. 175 and 176 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf this is a brand-new lock open it using the combination zero zero zero once your lock is open youMoreIf this is a brand-new lock open it using the combination zero zero zero once your lock is open you can insert your reset tool which came with your lock.
How do I reprogram my Kwikset deadbolt?
Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once.
How do I reset my Kwikset smart key without a current key?
What You Will Need to Follow this TutorialPrepare Necessary Tools And Workspace.Remove The Locks From Your Door.Free The Cylinder From The Housing.Get The Plug Out Of The Cylinder.Pull The Plug Out Of The Core.Find The Reset Tab To Align The Wafers.Insert New Key.Reassemble The Lock.
How do I factory reset my Kwikset?
2 Kwikset: Factory Reset Slide up the cover to open the back of your lock, exposing the buttons beneath. Push and hold the reset button for 10 seconds, until the lock beeps. The light ring will flash red, then spin amber. The lock has now been restored and is ready to be set up again.
What is the master code for Kwikset?
0-0-0-0The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
How do I reset my Kwikset lock code without master code?
Hold the button continuously for 30 seconds until you hear a beeping sound and see the status LED flashing red. Press the program button once again until you see the status LED flashing green and hear two beeping sounds. The Kwikset SmartCode deadbolt has now been reset and ready to be set up again.
How do I change the code on my Kwikset Smart lock?
It is recommended that you change it to a code of your own.Make sure the lock is unlocked and the door is open.Enter your Programming Code - for new installation, default is 0-0-0-0.Press enter arrow. You will hear one beep.Press 4 .Press enter arrow. You will hear one beep.Enter a new Programming Code.
How do you reset a smart door lock?
Find the reset key in the back of the smart lock Open your door with the fingerprint or your key, and slide up the cover to open the back of your lock, exposing the buttons beneath. You can see a small button near the battery. Just like the below image, the reset button is on the top-left of the battery.
How do I reset my Kwikset keypad lock?
Press and hold the “Reset” button for 5 seconds. You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features.
How do I change the code on my Kwikset SmartCode?
0:221:28How to Change Codes on Kwikset Deadbolt - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to set the code you simply hit the button. And then on the front you want to type in the codeMoreSo to set the code you simply hit the button. And then on the front you want to type in the code that you want here i'm using 1357. And then hit the door lock. So once again you hit the button on the
How do I change my door lock code?
0:522:30How to Change the Code on a Digital Combination Door Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing some tweezers or a pair of pliers. And insert coded and non coded tumblers wherever you wantMoreUsing some tweezers or a pair of pliers. And insert coded and non coded tumblers wherever you want them. Here. I'm changing the code from one two three four five to six seven eight nine zero.
How do I change the code on my Kwikset lock 913?
How do I program my SmartCode 913 lock?Open the door.Remove battery cover.Press the program button once.Enter new user code.Press lock button.If programming is successful the keypad will flash green once, and you will hear one beep.
How to use a key on a lock?
Insert the new key you wish to use with the lock. Make sure your key is FULLY inserted. The edge of the key touches the indent in the cylinder face. Without pushing or pulling the key, rotate it 180 degrees counter-clockwise. Then rotate they key 180 degrees clockwise.
How to make sure your door is locked?
Ensure your door cannot close on its own, or that you have another way to enter you home. Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise.
How to contact Kwikset for reset?
Want to learn more about our SmartCode deadbolts or other types of door hardware? Need help with Kwikset SmartCode reset? Contact our experienced customer service team at (866) 755-5625 or contact us online. Place your orders and enjoy free shipping on orders over $299.
What is a Kwikset deadbolt?
The Kwikset SmartCode deadbolt is a sleek and modern electronic lock designed to fit in almost any existing decor. Featuring a heavy-duty and high-quality construction, multiple user code settings, built-in alarm, and the ability to be integrated into a smart home system, SmartCode locks from Kwikset are perfect for residential and commercial use.
What does a factory reset do to a smart lock?
It’s important to understand that a factory reset deletes all access codes associated with your SmartCode deadbolt and restores the lock to the default factory settings. It will also remove it from your smart home system. So, if you have a centralized smart home controller, you’ll want to select the option to remove the device first.
When you move into a new home with an existing Kwikset smartcode, do you reset the code?
When you move into a new home with an existing Kwikset Smartcode (you’ll want to do a reset to delete all existing user codes and create your unique codes)
How to confirm if a lock is complete?
To confirm if the process is complete, test the lock using an existing user code - the lock should not work. If the lock was part of your smart home security system, you need to pair it with your smart home system again.
Do you need to reset a Kwikset smart code?
If you own one of these locks, you may find yourself in a situation where you need to do a quick Kwikset SmartCode reset for various reasons. Perhaps it’s not working as intended, or you’ve forgotten your access codes or want to deny access. Either way, you’ll need to reset it. Here is a step-by-step guide on how to reset your SmartCode lock and when you should do it.
Why do you rekey a deadbolt lock?
Re-keying a lock is useful for improving the security of a home and it can replace previous keys that you have lost or may have been unknowingly copied. Many steps of this process contain small parts, so proceed with caution in this fix.
How to remove retaining clip from cylinder?
Remove the retaining clip from the back of the cylinder assembly using tweezers or pliers.
How to remove bottom pins from a plug?
Remove the bottom pins from the plug. This can be done easily by turning over the plug and dumping them out.
How to rekey a Kwikset smart lock?
Rekeying your Kwikset Smart Key Lock with No Working Key. Step 1 – Remove the Locks from the Door. Step 2 – Freeing the Cylinder from the Housing. Step 3 – Pull the Lock Cylinder out of the Housing. Step 4 – Remove the Plug from the Lock Cylinder. Step 5 – Before you Pull the Plug Completely Out of the Core.
How to release a Kwikset lock?
Set the housing aside and examine the cylinder core. The cylinder core is held in the lock housing by a small retaining clip. The retaining clip slides to one side to release the lock cylinder. A small flat head screwdriver is the tool of choice at this point.
What is reset cradle?
The reset cradle is handy for landlords with many locks that require frequent rekeying as tenants change and don’t return the keys. The reset cradle is relatively inexpensive and does the job of rekeying a Kwikset Smart Key Lock quickly and easily.
What is a Kwikset key?
Kwikset Smart Key locks are smart, fashionable devices that provide homeowners with an easy way to lock their doors. But, if you're a forgetful homeowner like myself, you may have misplaced or lost your original key. Follow along as we explore the two solutions for when you lose your Kwikset Smart Key lock's key.
How to remove a lock cylinder?
Carefully pull the lock cylinder from the housing. Set the housing aside and examine the lock cylinder. On one end, you should see a small retainer clip that holds the cylinder plug in the lock cylinder. Removing this retaining clip without damage is probably the hardest part of the project.
How to get wafers aligned?
Getting the wafers aligned may seem difficult at first. Be patient. As you work, it will get easier. When all the wafers line up with the shear points, the plug should slip easily from the core.
Can you use two flathead screwdrivers to hold a lock cylinder?
You can accomplish the same thing with two flathead screwdrivers and some patience. You may need help to hold the lock cylinder while you manipula te the screwdrivers.
